Abstract
The aim of the present study was to compare sockets for below-knee (BK) prostheses made by Computer Aided Design-Computer Aided Manufacture (CAD-CAM) to those made by hand. The patients in the study were provided with two prostheses each, which apart from the sockets, were identical. One socket, was made by the CAD-CAM technique developed at the Bioengineering Centre, Roehampton, University College London and one was made by hand at the OT-Centre, Stockholm, Sweden. The results were based on investigation of eight unilateral below-knee amputees evaluating their own sockets by Visual Analogous Scale with respect to comfort, pressure, and pain. The sockets were evaluated on seven occasions, at two tests, on delivery, after use every second day for six days and every second week for two weeks. All CAD-CAM sockets except one had to be changed once as compared to the hand made of which only two had to be changed. As to comfort it could not be demonstrated that there was any significant difference between the two types of sockets and both types were well accepted by all patients. Differences in pressure and pain were rarely reported. There were obvious differences between the two types of socket with respect to height, width, and inner surface configuration.
The authors feel that CAD-CAM will in the near future be an excellent tool for design and manufacture of prosthetic sockets.