Abstract
The authors have developed a new in-built device for alignment of below-knee prostheses. The device allows one-point, stepless adjustment of angle and slide, independently of each other and also after completed prosthetic manufacture. Principally, the device consists of a half-sphere for angle adjustment and a plate for both slide adjustment and socket application. If the socket has to be exchanged, the whole device can be re-used, apart from the plate, which forms part of the socket bottom. The device is light, compact, cosmetically easy to cover and cheap. The design incorporates a combination of the most important facilities for alignment as well as for exchange of socket, and by its simplicity seems to offer major advantages over other designs.