Footwear cushioning was evaluated objectively using an impact tester and related to perceived levels of cushioning (PLC). To evaluate the perceived levels of cushioning during standing, walking, and running, 3 experiments were conducted with 20 participants in each experiment. A 7-point subjective rating scale was used to rate the perceived levels of cushioning. At the end of the experiment, the subjective perceptions of cushioning were also recorded. During standing and running, the perceived level of cushioning can be predicted from the time to peak deceleration and/or stiffness (or compression). During walking, however, the magnitude of the peak deceleration on the impact tester appears to be a good predictor of PLC. Impact characterizations can reveal important differences between materials and how they are perceived during activity. In addition, the results seem to explain and link the differences that exist in the ergonomics and biomechanics literature on cushioning. Applications of this research include the design and selection of materials for footwear, floor mats, and other supporting surfaces.
Get full access to this article
View all access options for this article.
References
1.
American Society for Testing and Materials. (1966). Impact resilience and penetration of rubber by the rebound pendulum (ASTM-D 1054-66).Philadelphia: Author.
2.
American Society for Testing and Materials. (1976). Standard specification for flexible cellular materials - Vinyl chloride polymers and copolymers (closed cell foam) (ASTM-D 1667- 76; reapproved 1990).Philadelphia: Author.
3.
Andreasson, G., & Peterson, L. (1986). Effects of shoe and surface characteristics on lower limb injuries in sports. International Journal of Sports Biomechanics, 2, 202–209.
4.
Arimond, J. (1987, May 21). Shock control. Machine Design, 59(12), 109–112.
5.
Athletic shoe cushioning. (1988, September/October). Nike Sport Research Review. [whole issue]
6.
Basford, J. R., & Smith, M. A. (1988). Shoe insoles in the workplace. Orthopedics, 11(2), 285–288.
7.
Bassi, A. C. (1978). Dynamic modulus of rubber by impact and rebound measurements. Polymer Engineering and Science, 18, 750–754.
8.
Boulton, A. J. M., Franks, C. I., & Betts, R. P. (1984). Reduction of abnormal foot pressures in diabetic neuropathy using a new polymer insole material. Diabetes Care, 7, 42–46.
9.
Brodsky, J. W., Kourosh, S., & Stills, M. (1988). Objective evaluation of insert material for diabetic and athletic footwear. Foot and Ankle, 9, 111–116.
10.
Brown, R. P. (1987). Performance tests for artificial sports surfaces. Polymer Testing, 7, 279–292.
11.
Campbell, G., Newell, E., & McLure, M. (1982). Compression testing of foamed plastics and rubbers for use as orthotic shoe insoles. Prosthetics and Orthotics International, 6, 48–52.
12.
Cavanagh, P. R. (1980). The running shoe book.Mountain View, CA: Anderson World.
13.
Cavanagh, P. R, Williams, R., & Clarke, T. E. (1979, October). Sophisticated testing procedures give runners significant new data. Runner's World, 14, 48–75.
14.
Cook, S. D., Kester, M. A., & Brunet, M. E. (1985). Biomechanics of running shoe performance. Clinics in Sports Medicine, 4, 619–626.
15.
Detmer, D. E. (1986). Chronic shin splints: Classification and management of medial tibial stress syndrome. Sports Medicine, 3, 436–446.
16.
Deutsche Industrie Norm. (1991). Sporthalen: Hallen fuer Turnen, Spiele und Mehrzwecknutzung - Sportboeden; Andforderungen, Pruefungen [Sport halls: Halls for gymnastics and games; Floors for sporting activities; Requirements, testing] (DIN 18032, Pt. 2). Berlin: Beuth Verlag.
17.
Deutsche Industrie Norm. (1992). Sportplaetze: Kunststofflaechen [Sporting grounds: Synthetic surfaces] (DIN 18035, Pt. 6).Berlin: Beuth Verlag.
18.
Fredrick, E. C. (1984). Sport shoes and playing surfaces.Champaign, IL: Human Kinetics.
19.
Gardner, L. I., Dziados, J. E., & Jones, B. H. (1988) Prevention of lower extremity stress fractures: A controlled trial of a shock absorbent insole. American Journal of Public Health, 78, 1563–1567.
20.
Gere, J. M., & Timoshenko, S. P. (1990). Mechanics of materials.Boston: PWS-Kent.
21.
Godfrey, C. M., Lawson, G. A., & Stewart, W. A. (1967). A method for determination of pedal pressure changes during weight-bearing: Preliminary observations in normal and arthritic feet. Arthritis and Rheumatism, 10(2), 135–140.
22.
Goonetilleke, R. S. (1992, July). Aerobic dance exercise: A survey of physical problems. Presented at the IDEA World Research Forum, Las Vegas, NV.
23.
Goonetilleke, R. S. (1998, July). Designing to minimize discomfort. Ergonomics in Design6, 12–19.
24.
Goonetilleke, R. S., & Cann, M. T. (1995). Perceived differences in running and walking shoes. In Proceedings of the Human Factors and Ergonomics Society 38th Annual Meeting (pp. 336–340). Santa Monica: Human Factors and Ergonomics Society.
25.
Hagberg, M., Silverstein, B., Wells, R., Smith, M. J., Hendrick, H. W., Carayon, P., & Perusse, M. (1995). Work related musculoskeletal disorders (WMSDs). London: Taylor & Francis.
26.
Hertzberg, H. T. E. (1958). Annotated bibliography of applied physical anthropology in human engineering (Report No. WADC-TR-56- 30). Wright Patterson Air Force Base, OH: Aero-Medical Library.
27.
Hong Kong Trade Development Council, Research Department. (1993). Footwear market in Japan. Hong Kong: Author.
28.
International Organization for Standardization (ISO). (1971). Vulcanized rubbers - Determination of rebound resilience, Lupke pendulum method (ISO R1767). Geneva, Switzerland: Author.
29.
International Organization for Standardization (ISO). (1975). Vulcanized rubber - Determination of rebound resilience (ISO-DIS 4462).Geneva, Switzerland: Author.
30.
Leber, C., & Evanski, P. M. (1986). A comparison of shoe insole materials in plantar pressure relief. Prosthetics and Orthotics International, 10, 135–138.
31.
Lowdon, A., Bader, D. L., & Mowat, A. G. (1984). The effects of heel pads on the treatment of Achilles tendinitis: A double blind trial. American Journal of Sports Medicine, 12, 431–435.
32.
Milgrom, C., Giladi, M., & Stein, M. (1985). Stress fractures in military recruits: A prospective study showing an unusually high incidence. Journal of Bone and Joint Surgery, 67B, 732–735.
33.
Newell, S. G., & Bramwell, S. T. (1984). Overuse injuries to the knee in runners. Physician and Sports Medicine, 12(3), 81–92.
34.
Nigg, B. M., Herzog, W., & Read, L. J. (1988). Effect of viscoelastic shoe insoles on vertical impact forces in heel-toe running. American Journal of Sports Medicine, 16, 70–76.
35.
Nigg, B. M., & Kerr, B. (Eds.). (1983). Biomechanical aspects of sports shoes and playing surfaces. Calgary, Canada: University Printing. Oxford English dictionary (2nd ed.). (1989). Oxford: Clarendon. Physical tests. (1990, January/February). Nike Sport Research Review. [whole issue]
36.
Radin, E. L., Paul, I. L., & Rose, R. M. (1972). Role of mechanical factors in pathogenesis of primary osteoarthritis. Lancet, 7749, 519–522.
37.
Random House Webster's college dictionary. (1995). New York: Random House.
38.
Redfern, M. S., & Chaffin, D. B. (1988). The effects of floor types on standing tolerance in industry. In F. Aghazadeh (Ed.), Trends in ergonomics/human factors V (pp. 401–405. Amsterdam: North-Holland.
39.
Redfern, M. S., & Chaffin, D. B. (1995). The influence of flooring on standing fatigue. Human Factors, 37, 570–581.
40.
Rys, M., & Konz, S. (1989). An evaluation of floor surfaces. In Proceedings of the Human Factors Society 33rd Annual Meeting (pp. 517–520). Santa Monica, CA: Human Factors and Ergonomics Society.
41.
Rys, M., & Konz, S. (1990). Floor mats. In Proceedings of the Human Factors Society 34th Annual Meeting (pp. 575–579). Santa Monica, CA: Human Factors and Ergonomics Society.
42.
Schwellnus, M. P., Jordaan, G., & Noakes, T. D. (1990). Prevention of common overuse injuries by the use of shock absorbing insoles: A prospective study. American Journal of Sports Medicine, 18, 636–641.
43.
Silvino, N., Evanski, P. M., & Waugh, T. R. (1980). The Harris and Beath footprinting mat: Diagnostic validity and clinical use. Clinical Orthopaedics, 151, 265–269.
44.
Simon, S. R., Radin, E. L., Paul, I. L., & Rose, R. M. (1972). The response of joints to impact loading: II. In vivo behavior of subchondral bone. Journal of Biomechanics, 5, 267–272.
45.
Voloshin, A., & Wosk, J. (1982). An in vivo study of low back pain and shock absorption in the human locomotor system. Journal of Biomechanics, 15, 21–27.
46.
Wosk, J., & Voloshin, A. S. (1985). Low back pain: Conservative treatment with artificial shock absorbers. Archives of Physical Medicine and Rehabilitation, 66, 145–148.
47.
Zhang, L., Drury, C. G., & Wooley, S. M. (1991). Constrained standing: Evaluating the foot/floor interface. Ergonomics, 34, 175–192.
48.
Zhang, L., Helander, M. G., & Drury, C. G. (1996). Identifying factors of comfort and discomfort in sitting. Human Factors, 38, 377–389.
