A Dynamic Mechanical Model for Hand Force in Right Angle Nutrunner Operation

Abstract

A deterministic mechanical model based on physical tool parameters was used for estimating static and dynamic hand forces from kinematic measurements. We investigated the effects of target torque (25, 40, and 55 Nm) and threaded fastener joint hardness (35-, 150-, 300-, 500-, and 900-ms torque buildup time) on hand force. Estimated hand force was affected by target torque and joint hardness. Peak and average dynamic hand force was least for the hard joint (35-ms buildup) and greatest for the medium hardness joint (150-ms buildup). Tool inertia played the major role in reducing hand reaction force. Estimated hand force decreased when the inertial force component increased. Inertial force decreased by 366% when buildup time increased from 35 to 300 ms. Static modeling overestimated hand force; the error ranged from 10% for a soft joint to 40% for a hard joint. Results from direct hand force measurements using a strain gauge dynamometer showed that the dynamic model overestimated peak hand force by 9%. However, average hand force and force impulse were not significantly overestimated.

Get full access to this article

View all access options for this article.

References

Armstrong, T. J. , Radwin, R. G. , Hansen, D. J. , & Kennedy, K. W. (1986) Repetitive trauma disorders: Job evaluation and design. Human Factors, 28, 325–336.

Basmajian, J. V. (1985). Muscles alive: Their functions revealed by electromyography (5th ed.). Baltimore: Williams & Wilkins.

Bouisset, S. , & Pertuzon, E. (1968). Experimental determination of the moment of inertia of limb segment. In J. Warten-Weiler , E. Jokl , & M. Hebbelinck (Eds.), Biomechanics 1 (pp. 106–109). New York: Karger.

Bouisset, S. (1973) EMG and muscle force in normal motor activities. New Developments in Electromyograpyy and Clinical Neurophysiology, 1, 547–583.

Dempster, W. T. (1955). Space requirements of the seated operator (Tech. Report WADC-TR-55-159). Wright-Patterson AFB, OH: Aerospace Medical Research Laboratories.

Drillis, R. , Schneck, D. , & Gage, H. (1963) The theory of striking tools. Human Factors, 5, 467–478.

Drillis, R. , Contini, R. , & Bluestein, M. (1964) Body segments parameters: A survey of measurement technique. Artificial Limbs, 8, 44–66.

Fellows, G. L. , & Freivalds, A. (1989). The use of force sensing resistors in ergonomic tool design. In Proceedings of the Human Factors Society 33rd Annual Meeting (pp. 713–717). Santa Monica, CA: Human Factors and Ergonomics Society.

Hortobagyi, T. & Katch, F. I. (1990) Eccentric and concentric torque-velocity relationships during arm flexion and extension: Influence of strength level. European Journal of Applied Physiology, 60, 395–401.

10.

International Standards Organization (1986). Mechanical vibration-Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration (ISO 5349–1986). New York: Author.

11.

Lindqvist, B. (1993) Torque reaction force reaction in angled nutrunners. Applied Ergonomics, 24, 174–180.

12.

Oh, S. (1995). Tool dynamics and workstation effects on power hand tool operation. Unpublished doctoral dissertation, University of Wisconsin-Madison, Madison, WI.

13.

Oh, S. , & Radwin, R. G. (in press). The influence of target torque and torque build-up time on physical stress in right angle nutrunner operation. Ergonomics.

14.

Oh, S. , & Radwin, R. G. (1993) Pistol grip power tool handle and trigger size effects on grip exertions and operator preference. Human Factors, 35, 551–569.

15.

Oh, S. , & Radwin, R. G. (1997). The effects of power hand tool dynamics and workstation design on handle kinematics and muscle activity. International Journal of Industrial Ergonomics, 20(1), 59–74.

16.

Radwin, R. G. , Masters, G. P. , & Lupton, F. W. (1991) A linear force-summing hand dynamometer independent on point of application. Applied Ergonomics, 22, 339–345.

17.

Radwin, R. G. , Oh, S. , & Fronczak, F. J. (1995). A mechanical model of hand force in power hand tool operation. In Proceedings of the Human Factors and Ergonomics Society 39th Annual Meeting (pp. 548–552). Santa Monica, CA: Human Factors and Ergonomics Society.

18.

Radwin, R. G. , Oh, S. , Jensen, T. R. , & Webster, J. G. (1992). External finger forces in submaximal five-finger static pinch prehension, Ergonomics, 35, 275–288.

19.

Radwin, R. G. , VanBergeijk, E. , & Armstrong, T. J. (1989) Muscle response to pneumatic hand tool torque reaction force reaction forces. Ergonomics, 32, 655–673.

20.

Silverstein, B. A. , Fine, L. , & Armstrong, T. J. (1987) Occupational factors and carpal tunnel syndrome. American Journal of Industrial Medicine, 11, 343–358.

21.

Ulin, S. S. , Snook, S. H. , Armstrong, T. J. , & Herrin, G. D. (1992) Preferred tool shapes for various horizontal and vertical work locations. Applied Occupational and Environmental Hygiene, 7, 327–337.