Evaluation of the Probability of Spinal Damage Caused by Sustained Cyclic Compression Loading

Abstract

A sensitivity analysis of two alternative models predicting damage to vertebral motion segments (VMS) in cyclic compression was performed to evaluate the relative probability of damage occurring when peak compression force, loading frequency, or duration in a lifting task is changed. The first model is based on the assumption that fatigue failure is the mechanism underlying damage to the VMS in cyclic compression. The second model is based on the assumption that the VMS damage in cyclic compression is determined by the viscoelastic deformation of the segment and that the instant of failure can be predicted on the basis of the energy stored in this process. With both models, we estimated the percentage of the population likely to incur a VMS injury when performing a repetitive lifting task with peak compression forces ranging from 1500 to 4100 N, frequencies from 2 to 12 min^-1, and durations between 30 and 120 min. The results indicate a dominant influence of the peak compression force on this outcome over the domain studied. This conclusion holds qualitatively for both models, suggesting that for a comparative analysis they can be considered interchangeable. However, a considerable quantitative difference in the absolute outcomes of the two models was found, which stresses the importance of further study on the validity of these models.

Get full access to this article

View all access options for this article.

References

Ayoub, M. M. (1992) Problems and solutions in manual materials handling: The state of the art. Ergonomics, 35, 713–728.

Bogduk, N. , & Twomey, L. T. (1987). Clinical anatomy of the lumbar spine. Melbourne: Churchill-Livingstone.

Brinckmann, P. , Biggeman, M. , & Hilweg, D. (1988). Fatigue fracture of human lumbar vertebrae. Clinical Biomechanics, 3 (Suppl. 1).

Brinckmann, P. , Biggeman, M. , & Hilweg, D. (1989). Prediction of the compressive strength of human lumbar vertebrae. Clinical Biomechanics, 4 (Suppl. 2).

Burns, M. L. , Kaleps, I. , & Kazarian, L. E. (1984) Analysis of compressive creep behavior of the vertebral unit subjected to a uniform axial loading using exact parametric solution equations of the kelvin-solid models---Part I. Human intervertebral joints. Journal of Biomechanics, 17, 113–130.

Chaffin, D. B. , & Andersson, G. B. J. (1991). Occupational biomechanics (2nd ed.) New York: Wiley.

Dieën, J. H. van , & Toussaint, H. M. (1995) Application of the maximum energy criterion to describe the strength of the motion segment under axial compression. Spine, 20, 518–525.

Granhed, H. , Jonson, R. , & Hansson, T. (1989) Mineral content and strength of lumbar vertebrae. Acta Orthopaedica Scandinavica, 60, 105–109.

Guo, X. D. E. , McMahon, T. A. , Keaveny, T. M. , Hayes, W. C. , & Gibson, L. J. (1994) Finite element modelling of damage accumulation in trabecular bone under cyclic loading. Journal of Biomechanics, 27, 145–155.

10.

Guzik, D. C. , Keller, T. S. , Szpalski, M. , Park, J. H. , & Spengler, D. M. (1996) A biomechanical model of the lumbar spine during upright isometric flexion, extension, and lateral bending. Spine, 21, 427–433.

11.

Hansson, T. H. , Keller, T. S. , & Spengler, D. M. (1987) Mechanical behaviour of the human lumbar spine: II. Fatigue strength during dynamic compressive loading. Journal of Orthopaedic Research, 5, 479–487.

12.

Hansson, T. , & Roos, B. , (1980) The influence of age, height, and weight on the bone mineral content of lumbar vertebrae. Spine, 5, 545–551.

13.

Hansson, T. , Roos, B. , & Nachemson, A. (1980) The bone mineral content and ultimate compressive strength in lumbar vertebrae. Spine, 5, 46–55.

14.

Keller, T. S. , Holm, S. H. , Hansson, T. H. , & Spengler, D. M. (1990) The dependence of intervertebral disc mechanical properties on physiologic conditions. Spine, 15, 751–761.

15.

Keller, T. S. , Spengler, D. M. , & Hansson, T. H. (1987) Mechanical behaviour of the human lumbar spine: I. Creep analysis during static compressive loading. Journal of Orthopaedic Research, 5, 467–478.

16.

Kumar, S. (1990) Cumulative load as a risk factor for back pain. Spine, 15, 1311–1316.

17.

Kuslich, S. D. , Ulstrom, C. L. , & Michael, C. J. (1991) The tissue origin of low back pain and sciatica. Orthopedic Clinics of North America, 22, 881–187.

18.

Leskinen, T. P. J. (1985) Comparison of static and dynamic biomechanical models. Ergonomics, 28, 285–291.

19.

Linde, F. , Gothgen, C. B. , Hvid, I. , & Pongsoiptech, B. (1988) Mechanical properties of trabecular bone by a nondestructive compression testing-approach. Engineering in Medicine, 17, 23–29.

20.

Looze, M. P. , de Kingma, I. , Thunnissen, W. , Wijk, M. J., van , & Toussiant, H. M. (1994) The evaluation of a practical biomechanical model estimating lumbar moments in occupational activities. Ergonomics, 37, 1495–1502.

21.

Looze, M. P. de , Visser, B. , Houting, I. , Rooy, M. A. G. , van, Dieën, J. H. , & van Toussaint, H. M. (1996) Weight and frequency effect on spinal loading in a brick laying task. Journal of Biomechanics, 29, 1425–1433.

22.

Looze, M. P. , de Zinzen, E. , Caboor, D. , Heijblom, P. , Bree, E. van, Roy, P. , van, Toussaint, H. M. , & Clarijs, J. P. (1994) Effect of individually chosen bed-height adjustments on the low-back stress of nurses. Scandinavian Journal of Work Environment and Health, 20, 427–434.

23.

Parnianpour, M. , Nordin, M. , Kahanovitz, N. , & Frankel, V. (1988) The triaxial coupling of torque generation of trunk muscles during isometric exertions and the effect of fatiguing isoinertial movements on the motor output and the movement pattern. Spine, 13, 982–992.

24.

Schwarzer, A. C. , Aprill, C. N. , Derby, R. , Fortin, J. , Kine, G. , & Bogduk, N. (1995). The prevalence and clinical features of internal disc disruption in patients with chronic low back pain. Spine, 17, 1878–1883.

25.

Turner, C. H. , Cowin, S. C. , Rho, J. Y. , Ashman, R. B. , & Rice, C. J. (1990) The fabric dependence of the orthotopic elastic constants of cancellous bone. Journal of Biomechanics, 23, 549–561.

26.

Waters, T. R. , Putz-Anderson, V. , Carg, A. , & Fine, L. J. (1993) Revised NIOSH equation for the design and evaluation of manual lifting tasks. Ergonomics, 36, 749–776.

27.

White, A. A. , & Panjabi, M. M. (1990). Clinical biomechanics of the spine. Philadelphia: Lippincott.