Quantification of Wrist Motions during Scanning

Abstract

A laboratory study was performed to help assess the risk of cumulative trauma disorders (CTDs) associated with the use of scanners in the grocery store environment. In this study experienced and inexperienced cashiers scanned a set of 12 standard grocery items using 19 different combinations of scanners, scanner orientations, and check stands. The motion characteristics of both wrists in three-dimensional space were documented and used as dependent measures of performance. These motions were compared with wrist motion benchmarks of high-and low-risk wrist accelerations. It was found that, in general, scanning motions are of sufficient magnitude to contribute to CTDs of the wrist. It was also found that wrist motion characteristics were greatly influenced by the different combinations of scanners, scanner orientations, and check stand designs. It was concluded that the "front-style" check stand minimizes potentially injurious wrist motions because it permits the checker to split the scanning task between the two hands. The type of scanner and scanner orientation that minimized potentially injurious wrist motions was much more unique to the individual workstation condition. Additionally, it appears that scanners perceived by the checkers as needing fewer wrist deviations, such as those with slanted windows, also minimize wrist motions. The implications of these findings for the ergonomic design of the workplace are discussed.

Get full access to this article

View all access options for this article.

References

Alexander, D. C. , and Pulat, B. M. (1985). Industrial ergonomics: A practitioner's guide. Norcross, GA: Industrial Engineering and Management.

Armstrong, T. J. (1983). An ergonomics guide to carpal tunnel syndrome. Fairfax, VA: American Industrial Hygiene Association.

Armstrong, T. J. (1986a). Ergonomics and cumulative trauma disorders. Hand Clinics, 2, 553–565.

Armstrong, T. J. (1986b). Upper extremity posture: Definition, measurement, and control. In J. Wilson , E. N. Corlett , and I. Manenica (Eds.), The ergonomics of working postures: Models, methods, and cases (pp. 59–73). Bristol, PA: Taylor & Francis.

Armstrong, T. J. , and Chaffin, D. B. (1979a). Carpal tunnel syndrome and selected personal attributes. Journal of Occupational Medicine, 21, 481–486.

Armstrong, T. J. , and Chaffin, D. B. (1979b). Some biomechanical aspects of the carpal tunnel. Journal of Biomechanics, 12, 567–570.

Armstrong, T. J. , Foulke, J. A. , Joseph, B. S. , and Goldstein, S. A. (1982). Investigation of cumulative trauma disorders in a poultry processing plant. American Industrial Hygiene Association Journal, 43, 103–116.

Baron, S. , Milliron, M. , Habes, D. , and Fidler, A. (1991). NIOSH health hazard evaluation 88-344-2092; Shoprite supermarkets, New Jersey-New York. Cincinnati, OH: National Institute of Occupational Safety and Health.

Brumfield, R. H. , and Champoux, J. A. (1984). A biomechanical study of normal functional wrist motion. Clinical Orthopaedics and Related Research, No. 190, 23–25.

10.

Buckle, P. , Stubbs, D. A. , and Baty, D. (1986). Musculoskeletal disorders (and discomfort) and associated factors. In J. Wilson , E. N. Corlett , and I. Manenica (Eds.), The ergonomics of working postures: Models, methods, and cases (pp. 19–30). Bristol, PA: Taylor & Francis.

11.

Food Marketing Institute Report. (1990). Quantification of wrist motions during scanning. Washington, DC: Food Marketing Institute.

12.

Margolis, W. , and Kraus, J. (1986). The prevalence and epidemiologic nature of carpal tunnel symptoms in supermarket checkers (National Institute for Occupational Safety and Health). Cincinnati, OH: National Institute of Occupational Safety and Health.

13.

Marras, W. S. , and Schoenmarklin, R. W. (1991). Quantification of wrist motion in highly repetitive, hand-intensive industrial jobs (National Institute for Occupational Safety and Health Final Report). Cincinnati, OH: National Institute of Occupational Safety and Health.

14.

Marras, W. S. , and Schoenmarklin, R. W. (1993). Wrist motions in industry. Ergonomics, 36, 341–351.

15.

Moore, A. E. (1988). A system to predict internal load factors related to the development of cumulative trauma disorders of the carpal tunnel and extrinsic flexor musculature during grasping. Unpublished master's thesis, University of Waterloo, Waterloo, Canada.

16.

Moore, A. E. , Wells, R. P. , and Ranney, D. (1991). Quantifying exposure in occupational manual tasks with cumulative trauma disorder potential. Ergonomics, 34, 1433–1453.

17.

Orgel, D. L. , Milliron, M. J. , and Frederick, L. J. (1990). NIOSH health hazard evaluation report 88-345-2031; Kroeger Company, Oxford, Ohio. Cincinnati, OH: National Institute of Occupational Safety and Health.

18.

Rosenstock, L. , Barnhart, S. , Longstreth, W. , Mason, S. , and Heyer; N. (1985). Health hazard evaluation: Carpal tunnel syndrome in Seattle grocery checkers (National Institute for Occupational Safety and Health). Cincinnati, OH: National Institute of Occupational Safety and Health.

19.

Schoenmarklin, R. W., and Marras, W. S. (1993). A dynamic model of flexor tendons in the wrist joint. Manuscript submitted for publication.

20.

Silverstein, B. A. , Fine, L. J. , Armstrong, T. J. , Joseph, B. , Buchholz, B. , and Robertson, M. (1985). Cumulative trauma disorders of the hand and wrist in industry. In E. N. Corlett , J. Wilson , and I. Manenica (Eds.), The ergonomics of working postures: Models, methods, and cases (pp. 31–38). Bristol, PA: Taylor and Francis.

21.

Silverstein, B. A. , Fine, L. J. , and Armstrong, T. J. (1986). Hand wrist cumulative trauma disorders in industry. British Journal of Industrial Medicine, 43, 779–784.

22.

Silverstein, B. A. , Fine, L. J. , and Armstrong, T. J. (1987). Occupational factors and carpal tunnel syndrome. American Journal of Industrial Medicine, 11, 343–358.

23.

Stoffman, L. D. , and Sterling, T. D. (1983). An occupational health survey of clerks and cashiers in the British Columbia retail food industry. Vancouver, Canada: United Food and Commercial Workers Union.

24.

Tanaka, S. , and McGlothlin, J. D. (1989). A conceptual model to assess musculoskeletal stress of manual work for establishment of quantitative guidelines to prevent hand and wrist cumulative trauma disorders (CTDs). In A. Mital (Ed.), Advances in industrial ergonomics and safety 1 (pp. 419–425). Bristol, PA: Taylor and Francis.

25.

Tichauer, E. R. (1978). The biomechanical basis of ergonomics: Anatomy applied to the design of work stations. New York: Wiley.

26.

Wallersteiner, U. (1981) Occupational health disorders of cashier operators in supermarkets. In Proceedings of the 14th Annual General Meeting of the Human Factors Association of Canada (pp. 79–83). Mississauga, Canada: Human Factors Association of Canada.

27.

Webb Associates . (1978). Anthropometric source book: Volume I. Anthropometry for designers (NASA Reference Publication 1024). Washington, DC: U.S. Government Printing Office.