The goal of this study was to determine the systematic effect that varying the slope angle of a computer keyboard along with varying keyboard height (relative to elbow height) have on wrist extension angle while typing. Thirty participants typed on a keyboard whose slope was adjusted to +15°, +7.5°, 0°, -7.5°, and -15°. The height of the keyboard was set up such that participants' wrists were at the same height as their elbows, above their elbows, and four cm below their elbows. Results showed that as keyboard slope angle moved downward from +15° to -15°, mean wrist extension decreased approximately 13° (22° at +15° slope to 9° at -15° slope). Keyboard height had a similar effect with mean wrist extension decreasing from 21.8° when the keyboard was lower than elbow height, to 7.3° when the keyboard was higher than elbow height. Potential application of this research includes the downward sloping of computer keyboards, which could possibly be beneficial in the prevention of musculoskeletal disorders affecting the wrist
Get full access to this article
View all access options for this article.
References
1.
Albin, T. (1997). Effect of wrist rest use and keyboard tilt on wrist angle while keying. In Proceedings of the 13th Triennial Congress of the International Ergonomics Association (pp. 16–18). Tempere, Finland: International Ergonomics Assocation.
2.
Armstrong, T. J. (1986). Ergonomics and cumulative trauma disorders. Hand Clinics, 2, 553–565.
3.
Armstrong, T. J., Castelli, W. A., Evans, F. G., & Diaz-Perez, R. D. (1984). Some histological changes in carpal tunnel contents and their biomechanical implications. Journal of Occupational Medicine, 26, 197–201.
4.
Armstrong, T. J., & Chaffin, D. B. (1978a). Some biomechanical aspects of the carpal tunnel. Journal of Biomechanics, 12, 567–570.
5.
Armstrong, T. J., & Chaffin, D. B. (1978b). An investigation of the relationship between displacements of the finger and wrist joints and the extrinsic finger flexor tendons. Journal of Biomechanics, 11, 119–128.
6.
Bergqvist, U., Wolgast, E., Nilsson, B., & Voss, M. (1995). Musculoskeletal disorders among VDT workers: Individual, ergonomic, and work organizational factors. Ergonomics, 38, 763–776.
7.
Erdelyi, A., Sihvonen, T., Helin, P., & Hanninen, O. (1988). Shoulder strain in keyboard workers and its alleviation by arm supports. International Archives of Occupational and Environmental Health, 60, 119–124.
8.
Faucett, J., & Rempel, D. (1994). VDT-related musculoskeletal symptoms: Interactions between work posture and psychosocial work factors. American Journal of Industrial Medicine, 26, 597–612.
9.
Goldstein, S. A., Armstrong, T. J., Chaffin, D. B., & Matthews, L. S. (1984). Analysis of cumulative strain in tendons and tendon sheaths. Journal of Biomechanics, 20, 1–6.
10.
Hedge, A., McCrobie, D., Land, B., Morimoto, S., & Rodriguez, S. (1995). Healthy keyboarding: Effects of wrist rests, keyboard trays, and a preset tiltdown system on wrist posture, seated posture, and musculoskeletal discomfort. In Proceedings of the Human Factors and Ergonomics Society 39th Annual Meeting (pp. 630–634). Santa Monica, CA: Human Factors and Ergonomics Society.
11.
Hedge, A., & Powers, J. R. (1995). Wrist postures while keyboarding: Effects of a negative slope keyboard system and full motion forearm supports. Ergonomics, 38, 508–517.
12.
Human Factors and Ergonomics Society (1988). American National Standard for Human Factors Engineering of Visual Display Terminal WorkstationsSanta Monica: Human Factors and Ergonomics Society.
13.
Kier, P. J., Wells, R. P., & Ranney, D. A. (1997). The effects of tendon load and posture on carpal tunnel pressure. Journal of Hand Surgery, 22A(4), 628–634.
14.
Life, M. A., & Pheasant, S. T. (1984). An integrated approach to the study of posture in keyboard operation. Applied Ergonomics, 15, 83–90.
15.
Marklin, R. W., Simoneau, G. G., & Monroe, J. F. (1999). Wrist and forearm posture from typing on split and verticallyinclined computer keyboards. Human Factors, 41, 559–569.
16.
Marras, W. S., & Schoenmarklin, R. W. (1993). Wrist motions in industry. Ergonomics, 36, 341–351.
17.
Rempel, D., Kier, P. J., Smutz, W. P., & Hargen, A. (1997). Effects of static fingertip loading on carpal tunnel pressure. Journal of Orthopaedic Research, 15, 422–426.
18.
Rempel, D., Serina, E., & Klinenberg, E. (1997). The effect of keyboard keyswitch make force on applied force and finger flexor muscle activity. Ergonomics, 40, 800–808.
19.
Sauter, S. L., Schlieffer, L. M., & Knutson, S. J. (1991). Work posture, workstation design, and musculoskeletal discomfort in a VDT data entry task. Human Factors, 33, 151–167.
20.
Schoenmarklin, R. W., & Marras, W. S. (1990). A dynamic biomechanical model of the wrist joint. In Proceedings of the Human Factors Society 34th Annual Meeting (pp. 805–809). Santa Monica, CA: Human Factors and Ergonomics Society.
21.
Simoneau, G. G., Marklin, R. W., & Monroe, J. F. (1999). Wrist and forearm posture of users of conventional computer keyboards. Human Factors, 41, 413–424.
22.
Sommerich, C. M., Marras, W. S., & Parianpour, M. (1996). A quantitative description of typing biomechanics. Journal of Occupational Rehabilitation, 6, 33–55.
23.
Weiss, N. D., Gordon, L., Bloom, T., So, Y., & Rempel, D. M. (1995). Position of the wrist associated with the lowest carpal tunnel pressure: Implications for splint design. Journal of Bone and Joint Surgery, 77-A, 1695–1699.
