Assessment of the Relationship between Box Weight and Trunk Kinematics: Does a Reduction in Box Weight Necessarily Correspond to a Decrease in Spinal Loading?

Abstract

Typically, the simplest and most cost-efficient ergonomic solution to offset the rising costs of low back injuries is to reduce the box weight that is lifted. However, there is limited research on how a worker interacts with the box. In the present study, we quantify the utility of reducing the weight that is lifted---specifically, how changes in the box weight affect trunk kinematics, trunk moments, and ultimately, spinal loads. In the experiment, 15 participants lifted a variety of box weights (from 9.1 to 41.7 kg) from knee height, carried it a distance of 5 feet (1.5 m), and placed it on a shelf at elbow height. For the lower weights, small increases in box weight (3-9 kg) were offset by the trunk dynamics (sagittal velocity), resulting in no difference in spinal loads. At the same time, spinal loads were found to be significantly higher for weights above 25 kg. Thus, when making ergonomic changes (reduction of box weight), it is important to consider how workers will interact with the box. These results indicate that purely weight-based ergonomic controls might not sufficiently reduce the risk of low back disorders. Furthermore, this study provides additional evidence of the utility of using more complex spinal load models (dynamic, multiple muscle models) when evaluating highly dynamic and complex tasks.