Laser spark emission spectroscopy is used to determine the elemental composition of contaminants found on electronic microcircuits fabricated on alumina substrates. This technique is particularly useful for rapid analyses of dielectric surfaces, and spatially resolved data with some degree of depth profiling information are obtained. Two specific examples are given which illustrate the utility of the method in pinpointing production problems.
CremersD. A. and RadziemskiL. J, “Laser Plasmas for Chemical Analysis,” in Laser Spectroscopy and Its Applications, RadziemskiL. J.SolarzR. W. and PaisnerJ. A, Eds. (Marcel Dekker, New York, 1987), Chap. 5.
2.
AdrainR. S. and WatsonJ, J. Phys. D: Appl. Phys.17, 1915 (1984).
3.
RadziemskiL. J. and CremersD. A, “Spectrochemical Analysis Using Laser Plasma Excitation,” in Laser Induced Plasmas and Applications, RadziemskiL. J. and CremersD. A, Eds. (Marcel Dekker, New York, 1989), Chap. 7.
4.
OttesenD. K.WangJ. C. F. and RadziemskiL. J, Appl. Spectrosc.43, 967 (1989).
5.
OttesenD. K.BaxterL. L.RadziemskiL. J. and BurrowsJ. F, Energy and Fuels5, 305 (1991).
6.
MeggersW. F.CorlissC. H. and ScribnerB. F, Tables of Spectral Line Intensities, Part I,” NBS-MN-145 (National Institute of Standards and Technology, Gaithersburg, Maryland, 1975).
