Laser-induced breakdown spectroscopy has been used to determine carbon content in steel. The plasma was formed by focusing a Nd:YAG laser on the sample surface. With the use of time-resolved spectroscopy and generation of the plasma in nitrogen atmosphere, a precision of 1.6% and a detection limit of 65 ppm have been obtained. These values are similar to those of other accurate conventional techniques. Matrix effects for the studied steels are reduced to a small slope difference between the calibration curves for stainless and nonstainless steels.
AdrainR. S. and WatsonJ, J. Phys. D17, 1915 (1984).
2.
RadziemskiL. J. and CremersD. A, “Spectrochemical Analysis Using Laser Plasma Excitation,” in Laser-induced Plasmas and Applications, RadziemskiL. J. and CremersD. A, Eds. (Marcel Dekker, New York, 1989), Chap. 7.
3.
GrantK. J.PaulG. L. and O'NeillJ. A, Appl. Spectrosc.44, 1711 (1990).
4.
RadziemskiL. J.LoreeT. R.CremersD. A. and HoffmanN. M, Anal. Chem.55, 1246 (1983).
5.
WachterJ. R. and CremersD. A, Appl. Spectrosc.41, 1042 (1987).
6.
CremersD. A., Appl. Spectrosc.41, 572 (1987).
7.
OttesenD. K.WangJ. C. F. and RadziemskiL. J, Appl. Spectrosc.43, 967 (1989).
8.
IidaY., Spectrochim. Acta45B, 1353 (1990).
9.
KagawaK.OhtaniM.YokoiS. and NakajimaS, Spectrochim. Acta39B, 525 (1984).
10.
ChenX. and MazumderJ, Appl. Phys. Lett.57, 2178 (1990).
11.
AlkemadeC. Th. J.SnellemanJ.BoultillerG. D.PollardB. D.WinefordnerJ. D.ChesterT. L. and OmenettoN, Spectrochim. Acta33B, 383 (1978).
