This paper describes a simple graphical calibration procedure for rapid determination of ash content in coal samples. The results obtained with this procedure are compared with those obtained earlier with the use of a regression equation. The two results are found to be in agreement.
PandeyH. D.HaqueR., and RamaswamyV., Adv. X-ray Anal.24, 323 (1981).
3.
PandeyH. D.PrasadM. S., and RamaswamyV., Presented at the Metallurgical Analysis Symposium, Indian Institute of Metals, Calcutta, India, August (1981).
4.
PandeyH. D. and ShastryC. R., X-ray Spectrom.11, 154 (1982).
5.
RhodesJ. R.DaglishJ. C., and ClaytonC. G., Radioisotope Instruments in Industry and Geophysics1, 447 (1966).
6.
BoyceI. S.ClaytonC. G., and PageD., Nucl. Tech. Miner. Resour., Proc. Int. Symp. 1977 (IAEA, Vienna, Austria, 1978), p. 135.
7.
BrownF. V. and JonesS. A., Adv. X-ray Anal.23, 57 (1980).
8.
PandeyH. D.PrasadM. S., and RamaswamyV., Steel India, 5, 91 (1982).
9.
PandeyH. D. and PrasadM. S., R & D Center, (SAIL) Technical Report No. R & D 27.02.255.82 (1982).
10.
PandeyH. D. and PrasadM. S., Spectrochim. Acta38B, 1371 (1983).
