Steel Analysis with Laser-Induced Breakdown Spectrometry in the Vacuum Ultraviolet

Abstract

Laser-induced breakdown spectrometry (LIBS) with multiple pulse excitation has been applied for the multielemental analysis of steel samples in the vacuum ultraviolet. The emission of the induced plasma was coupled into a Paschen-Runge spectrometer equipped with photomultipliers linked to high-speed multichannel signal electronics. Time-resolved signal evaluation yields a significantly improved signal-to-noise ratio for the plasma emission periods after a multi-pulse excitation. Reference materials for low-alloy steel grades were used to calibrate the measurements. The investigations concentrated on the light elements phosphorus, sulfur, and carbon using emission wavelengths in the range from 178.28 nm to 193.09 nm. For the first time, limits of detection below 10 μg/g were achieved for the light elements phosphorus, sulfur, and carbon using LIBS. With these results the basis is established for future on-line applications of LIBS in the steel industry.

Keywords

Laser-induced breakdown spectrometry Steel Vacuum ultraviolet Paschen-Runge spectrometer Multi-pulse excitation Limits of detection

Get full access to this article

View all access options for this article.

References

Aguilera

J. A.

Aragon

and Campos

, Appl. Spectrosc. 46, 1382 (1992).

Noll

Sattmann

Sturm

Lüngen

and Von Wachtendonk

H.-J

, Stahl und Eisen 117, 57 (1997).

Sugihara

Funahashi

Fukui

and Miyama

, in Progress in Analytical Chemistry in the Steel and Metals Industry, Nauche

Ed. (European Commission, Luxembourg, 1996), p. 229.

Sattmann

Sturm

and Noll

, J. Phys. D: Appl. Phys. 28, 2181 (1995).

Sensitivity-enhanced Laser Analysis of Steel Melts for a Fast Multielement Online Analysis during Ladle Processing in Secondary Metallurgy, ECSC project No. 7210/GD-120,-907,-121, Final report (European Commission, Luxembourg), to be published.