Abstract
Safe clinical practice in implant dentistry requires an accurate investigation of the availability of bone for implant placement and the avoidance of critical anatomical structures. Modern imaging techniques using computed tomography (CT) and cone beam computed tomography (CBCT) provide the clinician with the required information. The imaging thus obtained provides accurate representation of the height, width and length of the available bone.1 In addition, whenever adequate radiation dose is used, accurate information about the bone density in Hounsfield units can be obtained. Important spatial information regarding the orientation of the ridges and the relationship to the proposed prosthetic reconstruction can be obtained with the aid of radiopaque templates during the acquisition of CT scan data.
Modern software also provides the facility to decide interactively upon the positioning of the implants and is able to relate this to a stereolithographic model constructed from the imaging data. A surgical guide for the accurate positioning of the implants can be constructed.
The construction of screw retained prostheses is fraught with difficulties regarding the accuracy of the construction. Accurate fit of the prosthesis is difficult to obtain due to the inherent errors in impression taking, component discrepancies, investing and casting inaccuracies.2,3 CAD/CAM technology eliminates the inaccuracies involved with the investing and casting of superstructures.
Clinical Case
This case describes the management of an 84 year old female patient, who had recently lost her remaining mandibular anterior teeth. This resulted in the patient's inability to wear conventional dentures in the mandible.
Get full access to this article
View all access options for this article.