This paper reviews impact testing technics using Split Hopkinson Pressure Bar setup. Experimental aspects such as the use of large diameter soft Nylon Hopkinson/Kolsky bar for an enhanced measuring accuracy and the field measurement technics with high speed camera and digital image analysis are discussed in details. Nominal testing results on various cellular structures (hollow sphere agglomerates, foams and honeycombs) are presented. Field measurement application to the determination of shock front speed in foams and the extraction of deforming profiles of beams in lattice structures under impact loading were also presented.
FanH.L. and FangD.N., Anisotropic mechanical properties of lattice grid composites, Journal of Composite Materials, 2008, 42(23), 2445–2460.
3.
ZhangY.H.QiuX.M. and FangD.N., Mechanical Properties of two Novel Planar Lattice Structures, International Journal of Solids and Structures, 2008, 45(13), 3751–3768
4.
KlintworthJ.W. and StrongeW.J., Elasto-plastic yield limits and deformation laws for transversely crushed honeycombs, International Journal of Mechanical Sciences, 1988, 30 (3–4), 273–292.
5.
CuiX.ZhangY.ZhaoH.LuT.J. and FangD.N., Stress concentration in two-dimensional lattices with imperfections, Acta Mechanica, 2011, 216, 105–122.
6.
ZhaoH.ElnasriI. and GirardY., Perforation of aluminium foam core sandwich panels under impact loading – An experimental study, International Journal of Impact Engineering, 2007, 34(7), 1246–1257.
7.
HouWHZhuFLuGXFangDN, Ballistic impact experiments of metallic sandwich panels with aluminium foam core. International Journal of Impact Engineering, 2010, 37, 1045–1055.
8.
ZengH.B.PattofattoS.ZhaoH.GirardY. and FascioV., Perforation of sandwich plates with graded hollow sphere cores under impact loading, International Journal of Impact Engineering, 2010, 37(11), 1083–1091.
9.
GoldsmithW. and SackmanJ.L., An experimental study of energy absorption in impact on sandwich plates. International Journal of Impact Engineering, 1992, 12 (2), 241–262.
10.
WuE. and JiangW.S., Axial crush of metallic honeycombs, International Journal of Impact Engineering, 1997, 19(5–6), 439–456.
11.
ZhaoH. and GaryG., Crushing beheviour of aluminium honeycombs under impact loading, International Journal of impact Engineering, 1997, 21(10), 827–836.
12.
DeshpandeV.S. and FleckN.A., High strain rate compressive behaviour of aluminium, International Journal of Impact Engineering, 2000, 24(3), 277–298.
13.
MukaiT.KanahashiH.MiyoshiT.MabuchiM.NiehT.G. and HigashiK., 1999. Experimental study of energy absorption in a closed cell aluminium foam under dynamic loading, Scripta Materialia, 1999, 40(8), 921–927.
14.
DannemannK.A. and LankfordJ., High strain rate compression of closed-cell aluminium foams, Materials Science and Engineering: A, 2000, 293(1–2), 157–164.
15.
ReidS.R. and PengC., Dynamic uniaxial crushing of wood, International Journal of Impact Engineering, 1997, 19(5–6), 531–570.
16.
LopatnikovS.L.GamaB.A.HaqueMd. J.KrauthauserC.GillespieJ.W.GudenM. and HallI.W., Dynamics of metal foam deformation during Taylor cylinder-Hopkinson impact experiment, Composite Structure, 2003, 61(1–2), 61–71.
17.
LopatnikovS.L.GamaB.A.HaqueMd. J.KrauthauserC. and GillespieJ.W., High-velocity plate impact of metal foams, International Journal of Impact Engineering, 2004, 30(4), 421–445.
18.
RadfordD.D.DeshpandeV.S. and FleckN.A., The use of metal foam projectile to simulate shock loading on a structure, International Journal of Impact Engineering, 2005, 31(9), 1152–1171.
19.
ChangF.S.SongY.LuD.X. and DesilvaC. N., Unified constitutive equations of foams materials, Journal of Engineering Materials and Technology, 1998, 120(3), 212–217.
20.
RehkopfJ.D.McNeiceG.M. and BorlandG.W., Fluid and Matrix components of polyurethane foam behavior under cyclic compression, Journal of Engineering Materials and Technology, 1996, 118(1), 58–62.
21.
FaruqueO.LiuN. and ChouC., Strain rate dependent foam—constitutive modeling and applications, SAE Technical Paper No. 971076.
22.
SchreyerH.L.ZuoQ.H. and MajiA.K., Anisotropic plasticity model for foams and honeycombs, Journal of Engineering Mechanics, 1994, 120(9), 1913–1930.
23.
HopkinsonB., A method of measuring the pressure in the deformation of high explosives or by the impact of bullets. Philosophical Transactions of the Royal Society of London. Series A, 1914, 213, 437–452.
24.
KolskyH., An investigation of the mechanical properties of materials at very high rates of loading, Proceedings of the Physical Society. Section B, 1949, 62(11), 676–700.
25.
ZhaoH. and GaryG., On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains, International Journal of Solids and Structures, 1996, 33(23), 3363–3375.
26.
ZhaoH., A constitutive model for metals over a large range of strain rates Identification for mild-steel and aluminium sheets, Material Science and Engineering: A, 1997, 320(1–2), 95–99.
27.
ZhaoH., A study of specimen thickness effects in the impact tests on polymers by numeric simulations, Polymer, 1998, 39(5), 1103–1106.
28.
RindeJ.A. and HogeK.G., Time and temperature dependence of the mechanical properties of polystyrene bead foam, Journal of Applied Polymer Science, 1971, 15(6), 1377–1395.
29.
ZhaoH. and GaryG., Une nouvelle méthode de séparation des ondes pour l'analyse des essais dynamiques, Comptes rendus de l'Académie des sciences. Série II, Mécanique, physique, chimie, astronomie, 1994, 319(9), 987–992.
30.
ZhaoH. and GaryG., A three dimensional analytical solution of longitudinal wave propagation in an infinite linear viscoelastic cylindrical bar, Application to experimental techniques, Journal of the Mechanics and Physics of Solids, 1995, 43 (8), 1335–1348.
31.
DaviesR.M., A critical study of Hopkinson pressure bar, Philosophical Transactions of the Royal Society of London. Series A, 1948, 240(821), 375–457.
32.
GaryG.KlepaczkoJ.R. and ZhaoH., Correction de dispersion pour l'analyse des petites déformations aux barres de Hopkinson, Journal de Physique, 1991, 1, C3, 403–410.
33.
ZhaoH.NasriI. and AbdennadherS., An experimental study on the behaviour under impact loading of metallic cellular materials, International Journal of Mechanical Sciences, 2005, 47(4–5), 757–774.
34.
LehmhusD. and BanhartJ., Properties of heat-treated aluminium foams, Materials Science and Engineering: A, 2003, 394(1–2), 98–110.
35.
ZengH.B.PattofattoS.ZhaoH.GirardY. and Fascio, Impact behaviour of hollow sphere agglomerates with density gradient, International Journal of Mechanical Sciences, 2010, 52, 680–688.
36.
HildF.RakaB.BaudequinM.RouxS. and CantelaubeF., Multiscale displacement field measurements of compressed mineral-wool samples by digital image correlation, Applied Optics, 2002, 41(32), 6815–6828.
37.
ElnasriI.PattofattoS.ZhaoH.TsitsirisH.HildF. and GirardY., Shock enhancement of cellular structures under impact loading: Part I Experiments. Journal of the Mechanics and Physics of Solids55 (2007) 2652–2671.
38.
CalladineC.R. and EnglishR.W., Strain-rate and inertia effects in the collapse of two types of energy-absorbing structure. International Journal of Mechanical Science, 1984, 26 (11–12), 689–701.
39.
BudianskyB.HutchinsonJ. W., 1964. Dynamic buckling of imperfection sensitive structures. Proc. 11th international Congress of Applied MechanicsSpringer Verlag, Munich.
40.
ZhaoH.AbdennadherS., 2004, On the strength enhancement under impact loading of square tubes made from rate insensitive metals, Int. J. Solid Struct., 41, 6677–6697.
41.
CannyJ., A computational approach to edge detection. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1986, 8(6), 679–698.
