Experimental Performance of Recycled Aggregate Concrete-Filled Circular Steel Tubular Columns Subjected to Cyclic Flexural Loadings

Abstract

This paper is an attempt to study the cyclic performances of recycled aggregate concrete (RAC)-filled steel tubular columns. Thirteen specimens with circular section, including 10 RAC-filled steel tubular (RACFST) columns and 3 reference normal concrete-filled steel tubular (CFST) columns, were tested under constant axial load and cyclically increasing flexural loadings. The parameters in the test are: (1) concrete type: normal concrete and recycled aggregate concrete; and (2) axial load ratio (n), from 0.05 to 0.52. It was found that, generally, the performances of RACFST columns under constant axial load and cyclically increasing flexural loadings are similar to the corresponding normal CFST columns, and RACFST columns can also exhibit high ductility levels and energy dissipation abilities.

Keywords

concrete-filled steel tube (CFST)recycled aggregate concrete (RAC)composite columns cyclic loads capacity flexural stiffness ductility energy dissipation

Get full access to this article

View all access options for this article.

References

Ajdukiewicz

and Kliszczewicz

(2002). “Influence of recycled aggregates on mechanical properties of HS/HPC”, Cement & Concrete Composites, Vol. 24, No. 2, pp. 269–279.

ATC-24. (1992). Guidelines for Cyclic Seismic Testing of Components of Steel Structures, Redwood City (CA): Applied Technology Council.

Corinaldesi

and Moriconi

(2006). “Behavior of beam-column joints made of sustainable concrete under cyclic loading”, Journal of Materials in Civil Engineering, ASCE, Vol. 18, No. 5, pp. 650–658.

Elremaily

and Azizinamini

(2002). “Behavior and strength of circular concrete-filled tube columns”, Journal of Constructional Steel Research, Vol. 58, No. 12, pp. 1567–1591.

Etxeberria

Marí

A.R.

and Vázquez

(2007). “Recycled aggregate concrete as structural material”, Materials and Structures, Vol. 40, No. 5, pp. 529–541.

Han

L.H.

Yao

G.H.

Chen

Z.B.

and Yu

(2005a). “Experimental behaviours of steel tube confined concrete (STCC) columns”, Steel and Composite Structures, Vol. 5, No. 6, pp. 459–484.

Han

L.H.

Yao

G.H.

and Zhao

X.L.

(2004). “Behavior and calculation on concrete-filled steel CHS (circular hollow section) beam-columns”, Steel and Composite Structures, Vol. 4, No. 3, pp. 169–188.

Han

L.H.

You

J.T.

and Lin

X.K.

(2005b). “Experimental behaviour of self-consolidating concrete (SCC) filled hollow structural steel (HSS) columns subjected to cyclic loadings”, Advances in Structural Engineering, Vol. 8, No. 5, pp. 497–512.

Hansen

T.C.

(1992). Recycling of Demolished Concrete and Masonry, In: Hansen

T.C.

, eds, Report of RILEM TC 37-DRC on Demolition and Reuse of Concrete, E&FN Spon, London, UK.

10.

Rao

Jha

K.N.

and Misra

(2007). “Use of aggregates from recycled construction and demolition waste in concrete”, Resources, Conservation and Recycling, Vol. 50, No. 1, pp. 71–81.

11.

Varma

A.H.

Ricles

J.M.

Sause

and Lu

L.W.

(2002). “Seismic behavior and modeling of high-strength composite concrete-filled steel tube (CFT) beam-columns”, Journal of Constructional Steel Research, Vol. 58, No. 5–8, pp. 725–758.

12.

Xiao

Sun

and Falkner

(2006). “Seismic performance of frame structures with recycled aggregate concrete”, Engineering Structures, Vol. 28, No. 1, pp. 1–8.

13.

Yang

Y.F.

and Han

L.H.

(2006a). “Compressive and flexural behaviour of recycled aggregate concrete filled steel tubes (RACFST) under short-term loadings”, Steel and Composite Structures, Vol. 6, No. 3, pp. 257–284.

14.

Yang

Y.F.

and Han

L.H.

(2006b). “Experimental behaviour of recycled aggregate concrete filled steel tubular columns”, Journal of Constructional Steel Research, Vol. 62, No. 12, pp. 1310–1324.