The performance of gap springs in a guideway sliding isolator (GSI) system developed to protect precision machinery against seismic motion has been studied. A spring is initially distanced from the system by a gap, causing the isolation system to exhibit nonlinear performance once the gap is closed, reducing the chance of resonance. A full-scale shaking table test of a 22-ton specimen and a numerical model simulation in SAP2000 have been performed. The study shows that springs possessing the appropriate gaps are more effective in controlling relative displacements than is a pure friction system. The optimal gap for a system subjected to far-field earthquakes was found to be 5mm. In addition, supplemental viscous damping of less than 15% of the critical damping had no significant effect on the GSI system far-field seismic response, but it did reduce the relative displacements of the system for near-fault seismic excitations.
AlhanC. and GavinH. (2004). “A parametric study of linear and non-linear passively damped seismic isolation systems for buildings”, Engineering Structures, Vol. 26, No. 4, pp. 485–497.
2.
AlhanC. and GavinH. (2005). “Reliability of base isolation for the protection of equipment from earthquake hazards”, Engineering Structures, Vol. 27, No. 9, pp. 1435–1449.
3.
ButterworthJ.W. (2006). “Seismic response of a non-concentric rolling isolator system”, Advances in Structural Engineering, Vol. 9, No. 1, pp. 39–54.
4.
Computers and Structures Inc. (2002). SAP2000 Analysis Reference Manual-Version 8.0, Computers and Structures Inc., Berkeley.
5.
FujitaT. (1998). “Seismic isolation of civil buildings in Japan”, Progress in Structural Engineering and Materials, Vol. 1, No. 3, pp. 295–300.
6.
GuerreiroL.AzevedoJ. and MuhrA.H. (2007). “Seismic tests and numerical modeling of a rolling-ball isolation system.”Journal of Earthquake Engineering, Vol. 11, No. 1, pp. 49–66.
7.
IemuraH. and TaghikhanyT. (2004). “Optimum design of resilient sliding isolation system to protect equipment”, Proceedings of the 13th World Conference on Earthquake Engineering (WCEE), Vancouver, Canada, August, No. 1362.
8.
JangidR.S. (2000). “Optimum frictional elements in sliding base isolation system”, Computers and Structures, Vol. 76, No. 5, pp. 651–661.
9.
JangidR.S. (2002). “Parametric study of base-isolated structures”, Advances in Structural Engineering, Vol. 5, No. 2, pp. 113–122.
10.
JangidR.S. and KellyJ.M. (2001). “Base isolation for near-fault motion”, Earthquake Engineering and Structural Dynamics, Vol. 30, pp. 691–707.
11.
JangidR.S. and LondheY.B. (1998). “Effectiveness of elliptical rolling rods for base-isolation”, Journal of Structural Engineering, ASCE, Vol. 124, No. 4, pp. 469–472.
12.
KellyJ.M. (1998). “Seismic isolation of civil buildings in USA”, Progress in Structural Engineering and Materials, Vol. 1, No. 3, pp. 279–285.
13.
KellyJ.M. (1999). “The role of damping in seismic isolation”, Earthquake Engineering and Structural Dynamics, Vol. 28, No. 1, pp. 3–20.
14.
LinT. and HoneC. (1993). “Base isolation by free rolling rods under basement”, Earthquake Engineering and Structural Dynamics, Vol. 22, pp. 261–273.
15.
MartelliA. and ForniM. (1998). “Seismic isolation of civil buildings in Europe”, Progress in Structural Engineering and Materials, Vol. 1, No. 3, pp. 286–294.
16.
MatsagarV.A. and JangidR.S. (2005). “Base-isolated building with asymmetries due to the isolator parameters”, Advances in Structural Engineering, Vol. 8, No. 6, pp. 603–621.
17.
MorikawaY.FujitaS.NagataS. and ShimodaI. (1992). “Development of seismic isolation system for light equipment using friction pendulum bearing”, Proceedings of the 10th World Conference on Earthquake Engineering (WCEE), Madrid, Spain, July, pp. 2287–2290.
18.
MostaghelN. and KhodaverdianM. (1987). “Dynamics of resilient-friction base isolator (R-FBI)”, Earthquake Engineering and Structural Dynamics, Vol. 15, No. 3, pp. 379–390.
19.
MostaghelN. and TanbakuchiJ. (1983). “Response of sliding structure to earthquake support motion”, Earthquake Engineering and Structural Dynamics, Vol. 11, No. 3, pp. 729–748.
20.
NagarajaiahS.ReinhornA.M. and ConstantinouM.C. (1991). 3D-BASIS: Nonlinear Dynamic Analysis of Three Dimensional Base Isolated Structures – Part II, Report No. NCEER-91-0005, National Center for Earthquake Engineering Research, SUNY, Buffalo, New York.
21.
ParkY.J.WenY.K. and AngA.H. (1986). “Random vibration of hysteretic systems under bi-directional ground motions”, Earthquake Engineering and Structural Dynamics, Vol. 14, No. 4, pp. 543–557.
22.
RobinsonW.H. (1982). “Lead rubber bearings suitable for protecting structures during earthquakes”, Earthquake Engineering and Structural Dynamics, Vol. 10, pp. 593–604.
23.
SaadeghvaziriA.M. and FengM.Q. (2001). Experimental and analytical study of base-isolation for electric power equipment, Report on Research Progress and Accomplishments: 2000–2001, MCEER-02-SP01, Multidisciplinary Center for Earthquake Engineering Research, SUNY, Buffalo, New York.
24.
ShrimaliM.K. and JangidR.S. (2003). “Dynamic analysis of liquid storage tanks with sliding systems”, Advances in Structural Engineering, Vol. 6, No. 2, pp. 145–158.
25.
SimoJ.C. and KellyJ.M. (1984). “The analysis of multi-layer elastomeric bearings”, Journal of Applied Mechanics, ASME, Vol. 51, pp. 256–262.
26.
WenY.K. (1976). “Method for random vibration of hysteretic systems”, Journal of the Engineering Mechanics Division, ASCE, Vol. 102, No. EM2, pp. 249–263.
27.
ZayasV.A.LowS.S. and MahinS.A. (1990). “A simple pendulum technique for achieving seismic isolation”, Earthquake Spectra, Vol.6, No. 2, pp. 317–333.
