A Simplified Solution of the Torsional Rigidity of the Composite Beams by Using FEM

Abstract

In this paper, the torsional rigidity of the composite sections formed by different materials is obtained by using a finite element procedure. In the derivation of the differential equation, the Saint-Venant's stress function was used. The obtained partial differential equation was discretized by finite elements to get the potentials in the nodal points. After the calculations of the unknown potentials on the composite cross-section, the torsional rigidity is calculated by integrating the potentials on the solution domain. To test the validity of the proposed algorithm, the available analytical and numerical results from the previous studies were studied. It was seen that this new algorithm is efficient and simpler than the previous ones.

Keywords

torsional rigidity Saint-Venant's stress function finite element method numerical analysis composite beam

Get full access to this article

View all access options for this article.

References

Cheng

Wei

and Jiang

(1989). “Stress distribution and deformation of adhesive bonded laminated composite beams”, Journal of Engineering Mechanics, ASCE, Vol. 115, No. 6, pp. 1150–1162.

El Fatmi

and Zenzri

(2004). “A numerical method for the exact elastic beam theory. Applications to homogeneous and composite beams”, International Journal of Solids and Structures, Vol. 41, No. 9–10, pp. 2521–2537.

El Fatmi

and Zenzri

(2002). “On the structural behaviour and the Saint–Venant solution in the exact beam theory, application to laminated composite beam”, Computers and Structures, Vol. 80, No. 16–17, pp. 1441–1456.

Herrmann

L.R.

(1965). “Elastic torsional analysis of irregular shapes”, Journal of Engineering Mechanics, ASCE, Vol. 91, No. 6, pp. 11–19.

Kikuchi

(1986). Finite Element Methods in Mechanics, Cambridge Press, Cambridge, New York, USA.

Ladevèze

and Simmonds

J.G.

(1998). “New concepts for linear beam theory with arbitrary geometry and loading”, European Journal of Mechanics, A/Solids, Vol. 17, No. 3, pp. 377–402.

J.M.

and Ni

Y.Q.

(2000). “Torsional rigidity of reinforced concrete bars with arbitrary sectional shape”, Finite Elements in Analysis and Design, Vol. 35, No. 4, pp. 349–361.

Lekhnitskii

S.T.

(1963). Theory of Elasticity an Anisotropic Elastic Body, Holden day, San Francisco, USA.

Muskhelishvili

N.I.

(1963). Some Basic Problems of the Mathematical Theory of Elasticity, Noordho International Publishing, Leyden.

10.

Reddy

J.N.

(1993). Finite Element Method, McGraw-Hill, London, UK.

11.

Schulz

and Filippou

F.C.

(1998). “Generalized warping torsion formulation”, Journal of Engineering Mechanics, ASCE, Vol. 124, No. 3, pp. 339–347.

12.

Swanson

S.R.

(1998). “Torsion of laminated rectangular rods”, Composite Structures, Vol. 42, pp. 23–31.

13.

Timoshenko

S.P.

and Goodier

J.N.

(1969). Theory of Elasticity, 3rd Edition, McGraw-Hill, New York, USA.

14.

Zienkiewicz

O.C.

(1986). The Finite Element Method, McGraw-Hill, London, UK.