Experimental and Numerical Investigation of the Behaviour and Strength of Composite Steel-CFRP Members

Abstract

The use of advanced composite materials to strengthen and repair existing structures is increasing rapidly. One specific area in which the technique has recently been introduced is the strengthening of metallic structures with bonded carbon-fibre laminates. In this paper, the behaviour of composite steel-CFRP members is studied experimentally and using FE analysis. A new type of test specimen has been developed to examine the effect of various material parameters on the behaviour and strength of bonded steel-CFRP elements. Finite element analysis of the tested elements was also employed to examine the type and magnitude of interfacial stresses in the bond line of these elements. Moreover, different types of fracture mode could be examined by testing composite elements with different combinations of CFRP-laminates and adhesives. The tested composite elements displayed different behaviour and a large difference in strength and ductility could be observed.

Keywords

bonding strengthening steel CFRP adhesive interfacial shear stresses

Get full access to this article

View all access options for this article.

References

Al-Emrani

and Linghoff

(2005). Advanced Composite Materials for the Strengthening and Repair of Metallic Structures, Chalmers University of Technology, Civil and Environmental Engineering, Steel and Timber Structures, Report 2005:7.

Al-Saidy

A.H.

Klaiber

F.W.

and Wipf

. (2004). “Repair of steel composite beams with carbon fiber-reinforced polymer plates”, Journal for Composites for Construction, ASCE, Vol. 8, No. 2, pp. 163–173.

Bassetti

(2001). “Lamelles précontraintes en fibres de carbone pour le renforcement de ponts rivetés endommagés par fatigue”, Thése N° 2440, EPF Lausanne, Switzerland.

Colombi

and Poggi

(2006), “Strengthening of tensile steel members and bolted joints using adhesively bonded CFRP plates”, Construction and Building Materials, Vol. 20, Nos 1–2, pp. 22–33.

Jiao

and Zhao

X. L.

(2004). “CFRP strengthened butt-welded very high strength (VHS) circular steel tubes”, Thin-Walled Structures, Vol. 42, No. 7, pp. 963–978.

Luke

(2001). “The use of carbon fibre plates for the strengthening of two metallic bridges of an historic nature in the UK”, Proceedings, International Conference on FRP Composites in Civil Engineering, Hong Kong.

Mertz

D.R.

and Gillespie

J.W.

(1996). “Rehabilitation of steel bridge girders through the application of advanced composite materials, IDEA Program”, Transportation Research Board National Research Council (NCHRP), University of Delaware.

Miller

T.C.

Chajes

M.J.

Mertz

D.R.

and Hastings

J.N.

(2001). “Strengthening of a steel bridge girder using CFRP plates”, Journal of Bridge Engineering, ASCE, Vol. 6, No. 6, pp. 514–522.

Sen

Liby

and Mullins

(2001). “Strengthening steel bridge sections using CFRP laminates”, Composite Part B-Engineering, Vol. 32, No. 4, pp. 309–322.

10.

Shen

H.S.

Teng

J.G.

and Yang

(2001). “Interfacial stresses in beams and slabs bonded with thin plate”, Journal of Engineering Mechanics, ASCE, Vol. 27, No. 4, pp. 399–406.

11.

Tavakkolizadeh

and Saadatmanesh

(2003). “Strengthening of steel-concrete composite girders using carbon fiber reinforced polymer sheets”, Journal of Structural Engineering, ASCE, Vol. 129, No. 1, pp. 30–40.

12.

Teng

J.G.

and Zhang

(2005). “Finite element predictions of interfacial stresses in beams bonded with a thin plate”, Proceedings, International Symposium on Bond Behaviour of FRP in Structures (BBFS 2005), December 2005, Hong Kong, China.

13.

Teng

J.G.

Zhang

J.W.

and Smith

S.T.

(2002). “Interfacial stresses in reinforced concrete beams bonded with a sofit plate: A finite element study”, Construction and Building Materials, Vol. 16, No. 1, pp. 1–14.