The constitutive laws for concrete and steel under fire environments are cast into a computer model that is combined with the algorithm for seismic response analysis of reinforced concrete buildings. Using this algorithm, a computer program has been developed, and a reinforced concrete building is taken as an example to show the applicability. Finally the effects of fire locations, fire duration, ground acceleration and axial forces on such buildings are investigated.
AnederbergY., and ThelanderssonS. (1973). Stress and Deformation Characteristics of Concrete at High Temperatures, Bulletin 34, Division of Structural Mechanics and Concrete Construction, Lund Institute of Technology, Lund, Sweden.
2.
ASTM (1973). Standard Methods of Fire Tests of Building Designation E119–73, Book of ASTM Standards Part 14, American Society for Testing and Materials, Philadelphia, Pa.
3.
AtalayM. B. and PenzienJ. (1975). “The seismic behavior critical regions of reinforced concrete components as influenced by moment, shear and axial force”, Earthquake Engrg. Research Center Report No. EERC 75–19, Univ. of California, Berleley, Ca.
4.
BS 476 (1972, 1976). British Standards Institution, Part 8 (1972): “Fire tests on building materials structures”, Part 8 (1976): “Test Methods and Criteria for the Fire Resistance of Elements of Building Construction”, London, 16 pp.
5.
CloughR.W. and WilsonE.L. (1979). “Dynamic analysis of large structural systems with localized nonlinearities”, Computer Methods in Applied Mechanics and Engineering, North Holland Publ. Co., Vol. 17, pp. 107–129.
6.
CS (1990). Assessment and Repair of Fire-Damaged Concrete Structures”, Technical Report No.33, Report of a Concrete Society Working Party, The Concrete Society, 77 pp.
7.
GereJ. M. and TimoshenkoS. P. (1991). Mechanics of Materials, 3rd SI Ed., Chapman and Hall, London, 807 pp.
8.
HolmesM.AnchorR. D.CookG. M. E. and CrookR. N. (1982). “The effects of elevated temperature on the strength properties of reinforcing and prestressing steels”, The Structural Engineer, Vol. 60B, No.1, March, pp. 7–13.
9.
KordinaK. and KrampfL. (1984). “Empfehlungen für brandschutztechnish richtiges Konstruiren von Betonbauwerken”, Heft 352, Deutscher Ausschuss für Stahlbeton.
10.
LieT. T. and AllenD. E. (1972). “Calculation of the fire resistance of reinforced concrete columns”, Technical Paper No.378, Division of Building Research, National Research Council of Canada, Ottawa, Canada.
11.
LieT. T.RoweT. J. and LinT. D. (1986). “Residual strength of fire-exposed reinforced concrete column”, ACI Publication SP92–9, pp. 153–174.
12.
MalhotraH. L. (1982). “Design of Fire Resisting Structures”, Concrete International, October, pp. 17–19.
13.
MarchantE. W. (1973). A Complete Guide to Fire and Buildings; A Comprehensive Survey of Fire Protection and Provision, Barnes and Noble, New York, N. Y., pp. 150–170.
14.
MeyerC.RoufaielM. S. L., and ArzoumaindisS. G. (1983). “Analysis of damaged concrete frames for cyclic loads”, Earthquake Engineering and Structural Dynamics, Vol. 11, pp. 207–228.
15.
MoY. L. (1994). Dynamic Behavior of Concrete Structures, Elsevier Science Publishers B. V., Amsterdam / London / New York / Tokyo, 424 pp.
16.
MoY. L. and HwangW. L. (1998) “Shake table tests on prestressed concrete frames”, Materials and Structures, RILEM, Vol. 31, December, pp. 676–682.
17.
OtaniS. (1974). SAKE, A Computer Program for Inelastic Response of R/C Frames Subject to Earthquakes, Civil Engineering Studies, SRS No.413, University of Illinois, Urbana, November.
18.
OtaniS., and SozenM. A. (1972). Behavior of Multistory Reinforced Concrete Frames During Earthquakes, Structural Research Series No. 392, Univ. of Illinois, Urbana, I1.
19.
PettersonO. (1966). Structural Fire Engineering Research Today and Tomorrow, Bulletin 1, Division of Structural Mechanics and Concrete Construction, Lund Institute of Technology, Lund, Sweden.
20.
PettersonO. (1972). Fire Engineering Design of Tall Building, ASCE-International Association of Bridge and Structural Engineers International Conference Preprints: Vol. DS, International Conference on Planning and Design of Tall Buildings, Lehigh University, Bethlehem, Pa., pp. 350–406.
21.
Portland Cement Association (1987). Flexural and Shear Behavior of Reinforced Concrete Beams During Fire Tests, RDO91TC, Skokie, Illinois, 82 pp.
22.
RoufaielM. S. L. and MeyerC. (1987). “Analytical modeling of hysteretic behavior of R/C frames”, Journal of Structural Engineering, ASCE, Vol. 113, No. 3, March, pp. 429–443.
23.
SalesE. A. B., and GustaferoA. H., (1971). Structural Capacity of Concrete Beams During Fires as Affected by Restraint and Continuity, Commission W. Fourteenth Meeting of Comite International du Beton, Paris, France.
24.
SchneiderU. and HakseverA. (1976). Bestimmung der Äguivalenten Brandauer von Statisch Bestimmt Gelagerten Stahlbetonbauteilen Bei Natürlichen Bränden, Bericht des Instituts fur Baustoffkunde und Stahlbetonbau der Technischen Univerität Braunschweig, Braunschweig, Germany.
25.
SchneiferU. (1982). Verhalten von Beton Bei Hohen Temperaturen, Heft 337, Deutscher Ausschuss für Dtahlbeton.
26.
SmithL. M. (1983). The Assessment of Fire Damage to Concrete Structures, Thesis for PhD degree, Paisley College of Technology, Paisley, Scotland, September.
27.
StevensR. F. (1966). “Contribution to discussion on: Steel reinforcement, by R I Lancaster”, Structural Concrete, Vol.3, No.4, July/August, pp. 184–185.
28.
ToveyA. K. (1986). “Assessment and repair of fire-damaged concrete structures-an update”, ACI Publication SP 92–4, pp. 47–62.
29.
UmemuraH. and TakizawaH. (1982). Dynamic Response of Reinforced Concrete Buildings, Structural Engineering Documents, IABSE.
30.
YangW.S. (1990). Mechanical Behavior of Fire-Damaged Concrete Under Compression, Master Thesis, Department of Construction Engineering, National Taiwan University of Science and Technology.
