An analytical method is used to calculate the spacing and width of cracks for a series of reinforced concrete beams having different material and sectional properties. The calculated values are used to investigate the effects of different variables on the spacing and width of cracks. Bar diameter, effective width of the beam per bar, concrete cover and the effective depth are shown to be the most significant parameters affecting the spacing and width of cracks at a given load level. A parametric study is subsequently carried out utilising the above significant parameters, and the spacing and width of cracks are re-calculated. Results of this parametric study are used to develop simplified prediction formulae. Finally a comparative study is undertaken, which indicates that the spacing and width of cracks calculated by the new formulae agree well with the test results of other investigators.
ACI Committee 318 (1995). Building Code Requirements for Reinforced Concrete (ACI 318–95). American Concrete Institute, Detriot.
2.
BazantZ. P. and OhB. H.). “Spacing of cracks in reinforced concrete”, Journal of Structural Engineering, American Society of Civil Engineers, Vol. 109, No. 9, pp. 2066–2085.
3.
BeebyA. W. (1979). “The prediction of crack widths in hardened concrete”, The Structural Engineer, Vol. 57A, No. 1, pp. 9–17.
4.
British Standard Institute (1997). Structural Use of Concrete: Code of Practice for Design and Construction, BS 8110: Part 1, British Standard Institute, England.
5.
BromsB. B. (1965). “Crack width and crack spacing in reinforced concrete members”, Proceedings, ACI Journal, Vol. 62, No. 10, pp. 1237–1255.
6.
BromsB. B. and LutzL. A. (1965). “Effects of arrangement of reinforcement on crack width and spacing of reinforced concrete members”, Proceedings, ACI Journal, Vol, 62, No. 11, pp. 1395–1410.
7.
ChiM. and KirsteinA. F. (1958). “Flexural cracks in reinforced concrete beams”, Proceedings, ACI Journal, Vol. 54, No. 10, pp. 865–878.
8.
ClarkA. P. (1956). “Cracking in reinforced concrete flexural members”, Proceedings, ACI Journal, Vol. 52, No. 8, pp. 851–862.
9.
CookR. D.MalkusD. S. and PleshaM. E. (1989). Concepts and Applications of Finite Element Analysis, 3rd Edn, J. Willey.
10.
EligehausenR.BerteroV. V. and PopovE. P. (1983). “Local bond stress-slip relationships of deformed bars under generalised excitation: Tests and analytical model”, Report No. UCB/EERC-83, Earthquake Engineering Research Centre, University of California, Berkeley, California.
11.
GergelyP. and LutzL. A. (1968). “Maximum crack width in reinforced concrete flexural members”, Causes, Mechanism, and Control of Cracking Concrete, SP-20, American Concrete Institute, pp. 87–117.
12.
GiurianiE.PlizzariG. and SchummC. (1991). “Role of stirrups and residual tensile strength of cracked concrete on bond”, Journal of Structural Engineering, American Society of Civil Engineers, Vol. 117, No. 1, pp. 1–18.
13.
JiangD. H.ShahS. P. and AndonianA. T. (1984). “Study of the transfer of tensile forces by bond”, ACI Journal, Vol. 81, No. 3, pp. 251–259.
14.
KaarH. P. (1968). “An approach to the control of cracking in reinforced concrete”, Causes, Mechanism, and Control of Cracking Concrete, SP-20, American Concrete Institute, Detroit, pp. 141–157.
15.
KaarP. H. and MuttockA. H. (1963). “High strength bars as concrete reinforcement – part 4 control of cracking”, Journal of Portland Cement Association Research and Development Laboratories, Vol. 7, No. 1, pp. 42–53.
16.
KankamC. K. (1997). “Relationship of bond stress, steel stress, and slip in reinforced concrete”, Journal of Structural Engineering, ASCE, Vol. 123, No. 1, pp. 79–85.
17.
LanZ. and DingD. (1992). “Crack width in reinforced concrete members”, International Journal of Structures, Vol. 12, No. 2, pp. 137–163.
18.
MirzaS. M. and HoudeJ. (1979). “Study of bond stress-slip relationships in reinforced concrete, symposium on interaction between concrete and steel”, Proceedings American Concrete Institute, Vol. 76, No. 1, pp. 19–46.
19.
NilsonA.H. (1972). “Internal measurement of bond slip”, Proceedings, ACI Journal, Vol. 69, No. 7, pp. 439–441.
20.
PiyasenaR.LooYew-Chaye and FragomeniS. (2003). “Determination of crack spacing and crack width in reinforced concrete beams”, Structural Engineering and Mechanics, Vol. 15, No. 2, pp 159–180.
21.
Standards Association of Australia (AS 3600) (2001). Concrete Structures, Standards Association, Sydney, Australia.
22.
STRAND6 (1993). Finite Element Analysis System, G + D Computing Pty Ltd, New South Wales Australia.
23.
VenkateswarluB. and GesundH. (1972). “Cracking and bond slip in concrete beams”, Journal of the Structural Division, American Society of Civil Engineers, Vol. 98, No. ST11, pp. 2663–2885.
24.
ZienkiewiczO. C. (1977). The Finite Element Method, 3rd Edn, McGraw-Hill.
