Seismic Retrofit of Steel Deck-Truss Bridges: Experimental Investigation

Abstract

Alternative seismic retrofit strategies for steel deck-truss bridges are investigated in this study. Various modified tension-only bracing configurations, which consist of tendon elements with or without supplemental systems are introduced within the end-sway frames. The effectiveness of the retrofit configurations is demonstrated experimentally and analytically on a one-third scale model of an existing steel end-sway frame tested on the shaking table at the State University of New York at Buffalo. It is concluded that proposed alternatives can efficiently improve the lateral strength and stiffness characteristics. Moreover, the load path within the end-sway frame is modified to bypass the existing nonductile steel bearings. A stable energy dissipation mechanism is provided by means of re-centering elastomeric spring dampers along with fuse elements, thus reducing the overall seismic demand on the structural systems.

Keywords

deck-truss bridge retrofit supplemental damping fuse tendon prestress

Get full access to this article

View all access options for this article.

References

AASHTO Guide Specifications for the Seismic Design of Highway Bridges (1983) American Association of State Highway and Transportation Officials, Washington, D.C.

Imbsen

R.A.

, and Liu

W.D.

(1993) “Seismic evaluation of Benicia-Martinez bridge.” Proceedings of 1st U.S. Seminar on Seismic Evaluation and Retrofit of Steel Bridges, University of California at Berkeley.

Imbsen

R.A.

Schamer

R.A.

, and Davis

(1995) “Seismic retrofit of the north approach viaduct of the Golden Gate bridge.” Proceedings of the 1st National Seismic Conference on Bridges and Highways, CALTRANS and FHWA, San Diego, CA.

Liu

W.D.

Nobari

F.S.

Schamber

R.A.

, and Imbsen

R.A.

(1997) “Performance based seismic retrofit of Benicia-Martinez bridge.” Proceedings of the 2nd National Seismic Conference on Bridges and Highways: Progress in Research and Practice, Sacramento, CA, pp. 509–523.

Matson

D.D.

, and Buckland

P.G.

(1995) “Experience with seismic retrofit of major bridges.” Proceedings of the 1st National Seismic Conference on Bridges and Highways: Progress in Research and Practice, San Diego, CA.

Pekcan

Mander

J.B.

, and Chen

S.S.

(1995) “The seismic response of a 1:3 scale R.C. structure with elastomeric spring dampers.” Earthquake Spectra, Vol. 11, No. 2, pp. 249–267.

Pekcan

Mander

J.B.

, and Chen

S.S.

(2000a) “Seismic retrofit of end-sway frames of steel deck-truss bridges with a supplemental tendon system: Experimental and analytical investigation.” Technical Report MCEER-00-0004, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, N.Y.

Pekcan

Mander

J.B.

, and Chen

S.S.

(2000b) “Experiments on a steel MRF building with a supplemental tendon system.” Journal of Structural Engineering, ASCE, Vol. 126, No. 4, pp. 437–444.

Pekcan

Mander

J.B.

, and Chen

S.S.

(2000c) “Balancing lateral loads using a tendon-based supplemental damping system,” Journal of Structural Engineering, ASCE, Vol. 126, No. 8, pp. 896–905.

10.

Prakash

Powell

G.H.

, and Filippou

F.C.

(1992) “Drain-2DX: Base program user guide.” Report No. UCB/SEMM-92/29, Univ. of California, Berkeley, CA.

11.

Sarraf

, and Bruneau

(1998a) “Ductile seismic retrofit of steel deck-truss bridges. I: Strategy and modeling.” Journal of Structural Engineering, ASCE, Vol. 124, No. 11, pp. 1253–1262.

12.

Sarraf

, and Bruneau

(1998b) “Ductile seismic retrofit of steel deck-truss bridges. II: Design applications.” Journal of Structural Engineering, ASCE, Vol. 124, No. 11, pp. 1263–1271.

13.

Shama

(1999) Seismic Evaluation of a Cantilever Truss Bridge, Master Thesis, State University of New York at Buffalo.