Large-Scale Testing of Steel Portal Frames Comprising Tapered Beams and Columns

Abstract

Advanced analysis and design of steel frames can directly and exactly determine the ultimate system capacity without resort to simplified elastic methods of analysis and semi-empirical interaction equations (Chen, 1993). However, the application of advanced analysis methods has previously been based on steel frames comprising prismatic members. A research project has been conducted with the aim of developing concentrated plasticity methods suitable for practical advanced analysis and reliability-based design of steel portal frames with tapered members (Li, 2001). Two large-scale realistic tests were performed in order to provide experimental results for verification of the new analytical models, and to examine the important nonlinear effects that should be added in further theoretical research. Tested frames are identical in dimensions and with tapered beams and columns. One was subjected to incremental vertical loads and the other to simultaneous constant vertical loads and incremental horizontal loads. The details of the test program including the test frames, test rig and instrumentation, test procedure and results are given in this paper. Comparisons between design and analytical results are presented and discussed.

Keywords

Large-scale testing Steel structures Portal frames Tapered beams and columns

Get full access to this article

View all access options for this article.

References

Abe

Tagawa

and Sakai

M.A.

(1983) “A study of elastioplastic strength of gable frame composed by H-shapes”, Transaction of the Architectural Institute of Japan, Vol. 325, pp. 25–31.

AISC LRFD (1994) Manual of Steel Construction, Load and Resistance Factor Design, 2nd edition, American Institute of Steel Construction, Chicago, IL.

Avery

and Mahendran

(2000) “Large-scale testing of steel frame structures comprising noncompact sections”, Engineering Structures, Vol. 22, No. 8, pp. 920–936.

Boeraeve

Ph.

and Lognard

(1993) “Elasto-plastic behavior of steel frame works”, Journal of Constructional Steel Research, Vol. 27, No. 1, pp. 3–21.

CECS102:98 (1998) Chinese Specification for Steel Portal Frame Buildings.

Chen

S.F.

(1998) “Residual strength utility of post-buckled web plates in steel members with I-section”, Building Structures, Issue 8.

Chen

S.F.

(1996) Guideline for Stability Design of Steel Structures, Chinese Press of Civil Engineering, Beijing.

Chen

W.F.

(1993) Advanced Analysis in Steel Frames, CRC Press, Boca Raton, FL.

Chen

W.F.

Goto

and Liew

J.Y.R.

(1996) Stability Design of Semi-Rigid Frames, John Wiley & Sons Inc., New York.

10.

Davies

J.M.

Engel

Liu

T.T.C.

and Morris

L.J.

(1990) “Realistic modeling of steel portal fiame behavior”, The Structural Engineer, Vol. 68, No. 1, pp. 1–6.

11.

Heldt

T.J.

and Mahendran

(1998) “Full scale experiments of a steel portal frame building”, Journal of the Australian Institute of Steel Construction, Vol. 32, No. 4, Dec.

12.

Galatanu

A.D.

(1997) Behavior and Design of Hollow Flange Beam Compression Members, ME thesis, School of Civil Engineering, QUT, Brisbane, Australia.

13.

GBJ 17–88 (1989) Codes for Steel Structure Design.

14.

Kukreti

A.R.

Murray

T.M.

and Abolmaali

(1987) “End-plate cormection moment-rotation relationship”, Journal of Constructional Steel Research, Vol. 8, No. 1, pp. 137–157.

15.

G.Q.

and Li

J.J.

(2000) “Effects of shear deformation on the effective length of tapered columns with I-section for steel portal frames”, Structural Engineering and Mechanics, Vol. 10, No. 5, pp. 479–490.

16.

G.Q.

and Li

J.J.

(2002) “Advanced analysis and design of tapered steel portal frames considering integrated limit states”, resubmitted to Steel and Composite Structures.

17.

J.J.

(2001) Research on Theory of Nonlinear Analysis and Integrated Reliability Design for Steel Portal Frames with Tapered Members, PhD dissertation, Tongji University, Shanghai, China.

18.

MTTMM (1984) Method for Tensile Test of Metal Material, Chinese Standard.

19.

Prawel

S.P.

Morrel

M.L.

and Lee

G.C.

(1974) “Bending and buckling strength of tapered structural members”, Welding Journal, Vol. 53, No. 2.

20.

Salter

J.B.

Anderson

and May

I.M.

(1980) “Tests on tapered steel columns”, The Structural Engineer, Vol. 58A, No. 6, pp. 189–193.

21.

Shanmugam

N.E.

C.H.

and Liew

J.R.Y.

(1995) “Large-scale testing of steel sway frames.” In: Proceedings of the International Conference on Structural Stability and Design, Sydney, Australia.

22.

Shiomi

and Kurata

(1983) “Strength formula for tapered beam-columns”, Journal of Structural Engineering, ASCE, Vol. 110, No. 7, pp. 1630–1643.

23.

Toma

and Chen

W.F.

(1992) “European calibration frames for second-order inelastic analysis”, Journal of Structural Engineering, ASCE, Vol. 118, No. 1, pp. 7–14.

24.

Toma

and Chen

W.F.

(1994) “Calibration frames for second-order inelastic analysis in Japan”, Journal of Constructional Steel Research, Vol. 28, No. 1, pp. 51–77.

25.

Vickery

B.J.

and EngSc

B.E.M.

(1962) “The behavior at collapse of simple steel frames with tapered members”, The Structural Engineers, Vol. 40, No. 11, pp. 365–376.

26.

Wang

J.S.H.

Chang

K.C.

Lee

G.C.

and Ketter

R.L.

(1989) “Shaking table tests of pinned-base steel gable frame”, Journal of Structural Engineering, ASCE, Vol. 115, No. 12, pp. 3031–3043.