This paper presents a study on the bond behaviour of FRP-concrete bonded joints under static and dynamic loadings, by developing a meso-scale finite element model using the K&C concrete damage model in LS-DYNA. A significant number of single shear experiments under static pull-off loading were modelled with an extensive parametric study covering key factors in the K&C model, including the crack band width, the compressive fracture energy and the shear dilatation factor. It is demonstrated that the developed model can satisfactorily simulate the static debonding behaviour, in terms of mesh objectivity, the load-carrying capacity and the local bond-slip behaviour, provided that proper consideration is given to the selection of crack band width and shear dilatation factor. A preliminary study of the effect of the dynamic loading rate on the debonding behaviour was also conducted by considering a dynamic increase factor (DIF) for the concrete strength as a function of strain rate. It is shown that a higher loading rate leads to a higher load-carrying capacity, a longer effective bond length, and a larger damaged area of concrete in the single shear loading scenario.
BaylotJ.T. and BevinsT.L. (2007). “Effect of responding and failing structural components on the airblast pressures and loads on and inside of the structure”, Computers and Structures, Vol. 85, No. 11–14, pp. 891–910.
2.
BazantZ.P. and OhB.H. (1983). “Crack band theory for fracture of concrete”, Materials and Structures, Vol. 16, No. 3, pp. 155–177.
3.
BazantZ.P. and OzboltJ. (1990). “Nonlocal microplane model for fracture, damage, and size effect in structures”, Journal of Engineering Mechanics, ASCE, Vol. 116, No. 11, pp. 2485–2505.
4.
BazantZ.P. and Pijaudier-CabotG. (1988). “Nonlocal continuum damage, localization instability and convergence”, Journal of Applied Mechanics, Vol. 55, No. 2, pp. 287–293.
5.
BhattiA.Q.KishiN. and TanK. (2011). “Impact resistant behaviour of RC slab strengthened with FRP sheet”, Materials and Structures, Vol. 44, No. 10, pp. 1855–1864.
6.
BoydA.J.LiangN.GreenP.S. and LammertK. (2008). “Sprayed FRP repair of simulated impact in prestressed concrete girders”, Construction and Building Materials, Vol. 22, No. 3, pp. 411–16.
7.
BuchanP.A. and ChenJ.F. (2007). “Blast resistance of FRP composites and polymer strengthened concrete and masonry structures-a state-of-the-art review”, Composites, Part B: Engineering, Vol. 38, No. 5–6, pp. 509–522.
8.
CEB-FIP (1993). Model Code 1990 for Concrete Structures. Comité euro-international du Béton(CEB), Laussane, Switzerland.
9.
ChandraS.NilsenB. and LuM. (2010). “Predicting excavation methods and rock support: A case study from the Himalayan region of India”, Bulletin of Engineering Geology and the Environment, Vol. 69, No. 2, pp. 257–266.
10.
ChenG.M.ChenJ.F. and TengJ.G. (2012). “On the finite element modelling of RC beams shear-strengthened with FRP”, Construction and Building Materials, Vol. 32, pp. 13–26.
11.
ChenG.M.TengJ.G. and ChenJ.F. (2011). “Finite element modelling of intermediate crack debonding in FRP-plated RC beams”, Journal of Composites for Construction, ASCE, Vol. 15, No. 3, pp. 339–353.
12.
ChenG.M.TengJ.G. and ChenJ.F. (2009). “Finite element simulation of IC debonding in FRP-plated RC beams: A dynamic approach”, The 9th International Symposium on Fibre Reinforced Polymer for Concrete Structures (FRPRCS9), 13–15 July, Sydney, Australia, pp. 13–15.
13.
ChenJ.F.YangZ.J. and HoltG.D. (2001). “FRP or steel plate-to-concrete bonded joints: Effect of test methods on experimental bond strength”, Steel and Composite Structures, Vol. 1, No. 2, pp. 231–244.
14.
ChenJ.F. and TengJ.G. (2001). “Anchorage strength models for FRP and steel plates bonded to concrete”, Journal of Structural Engineering, ASCE, Vol. 127, No. 7, pp. 784–791.
15.
CrawfordJ.E.MalvarJ.WesevichJ.W. and RaynoldsA.D. (1997). “Retrofit of reinforced concrete structures to resist blast effects”, ACI Structural Journal, Vol. 94, No. 4, pp. 371–377.
16.
CrawfordJ.E.MalvarL.J.MorrillK.B. and FerrittoJ.M. (2001). “Composite retrofits to increase the blast resistance of reinforced concrete buildings”, Proceedings of the 10th International Symposium on Interaction of the Effects of Munitions with Structures, May, San Diego, CA, pp. 1–13.
17.
De LorenzisL. and La TegolaA. (2005). “Bond of FRP laminates to concrete under impulse loading: A simple model”, Proc. International Symposium on Bond Behaviour of FRP in Structures (BBFS 2005), Hong Kong, China, pp. 503–508.
18.
HeffernanP.J.WightR.G. and ErkiM.A. (2011). “Research on the use of FRP for critical load-bearing infrastructure in conflict zones”, Journal of Composites for Construction, ASCE, Vol. 15, No. 2, pp. 136–145.
19.
KimS.W. and VecchioF.J. (2008). “Modeling of shear-critical reinforced concrete structures repaired with fiber-reinforced polymer composites”, Journal of Structural Engineering, ASCE, Vol. 134, No. 8, pp. 1288–1299.
20.
LiX.Q.ChenJ.F. and LuY. (2010). “Meso-scale modelling of FRP-to-concrete bond behaviour using LSDYNA”, Proceedings of the 5th International Conference on FRP Composites in Civil Engineering, 27–29 September, Beijing, China, pp. 494–498.
21.
LiX.Q. (2012). FRP-to-Concrete Bond Behaviour under High Strain Rates, PhD thesis, The University of Edinburgh, Edinburgh, UK.
22.
LSTC (2007). Keyword User's Manual Version 971, Livermore Software Technology Corporation (LSTC), Livermore, CA, USA.
23.
LuX.Z.TengJ.G.YeL.P. and JiangJ.J. (2005). “Bond–slip models for FRP sheets/plates bonded to concrete”, Engineering Structures, Vol. 27, No. 6, pp. 920–937.
24.
LuX.Z.YeL.P.TengJ.G. and JiangJ.J. (2004). “Mesco-scale finite element model for FRP sheets/plates bonded to concrete”, Engineering structures, Vol. 27, No. 4, pp. 564–575.
25.
LublinerJ. (1989). “A plastic-damage model for concrete”, International Journal of Solids and Structures, Vol. 25, No. 3, pp. 299–326.
26.
MalvarL.J. and CrawfordJ.E. (1998). Dynamic Increasing Factors for Concrete, Naval facilities engineering service center, Port Hueneme, CA.
27.
MalvarL.J.CrawfordJ.E. and MorrillK.B. (2000). K&C Concrete Material Model Release3—Automated Generation of Material Model Input, Technical Report TR-99-24.3, Karagozian and Case Structural Engineers, Glendale, CA.
28.
MalvarL.J.CrawfordJ.E.WesevichJ.W. and SimonsD. (1997). “A plasticity concrete material model for DYNA3D”, International Journal of Impact Engineering, Vol. 19, No. 9–10, pp. 847–873.
29.
MalvarL.J. and SimonsD. (1996). “Concrete material modeling in explicit computations”, Proceedings of the Workshop on Recent Advances in Computational Structural Dynamics and High Performance Computing, USAE Waterways Experiment Station, April 24–26, Vicksburg, MS, pp. 165–194.
30.
MarkovichN.KochaviE. and Ben-DorG. (2011). “An improved calibration of the concrete damage model”, Finite Elements in Analysis and Design, Vol. 47, No. 11, pp. 1280–1290.
31.
NiroomandiA.MaheriA.MaheriM.R. and MahiniS.S. (2010). “Seismic performance of ordinary RC frames retrofitted at joints by FRP sheets”, Engineering Structures, Vol. 32, No. 8, pp. 2326–2336.
32.
PantelidesC.P. and GergelyJ. (2007). “Seismic retrofit of reinforced concrete beam-column T-joints in bridge piers with FRP composite jackets”, American Concrete Institute, ACI Special Publication, Vol. 258, pp. 1–18.
33.
SchwerL.E. and MalvarL.J. (2005). “Simplified concrete modeling with *mat_concrete_damage_rel3”, JRI LS-Dyna User Week, Nagoya, Japan, pp. 49–60.
34.
SuX.T.YangZ.J. and LiuG.H. (2010). “Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials: A 3D study”, International Journal of Solids and Structures, Vol. 47, No. 17, pp. 2336–2345.
35.
TaoY. and ChenJ.F. (2014). “Concrete damage plasticity model for modelling FRP-to-concrete bond behavior”, ASCE Journal of Composites for Construction, 2014, 10.1061/(ASCE)CC.1943–5614.0000482.
36.
TarapadaR. and DebabrataC. (2006). “Delamination in hybrid FRP laminates under low velocity impact”, Journal of Reinforced Plastics and Composites, Vol. 25, No. 18, pp. 1939–56.
37.
TengJ.G.ChenJ.F.SmithS.T. and LamL. (2002). FRP-Strengthened RC Structures, John Wiley and Sons, Chichester, UK.
38.
TengJ.G.ZouX.K.De LorenzisL. and XiaS.H. (2007). “Optimal performance-based design of FRP jackets for seismic retrofit of reinforced concrete frames”, Composites Part B: Engineering, Vol. 38, No. 5–6, pp. 584–97.
39.
TuZ.G. and LuY. (2009). “Evaluation of typical concrete material models used in hydrocodes for high dynamic response simulations”, International Journal of Impact Engineering, Vol. 36, No. 1, pp. 132–146.
40.
UedaT.SatoY. and AsanoY. (1999). “Experimental study on bond strength of continuous carbon fiber sheet”, ACI Special Publication, Vol. 188, pp. 407–416.
41.
WuC.OehlersD.J. and DayI. (2009). “Layered blast capacity analysis of FRP retrofitted RC member”, Advances in Structural Engineering, Vol. 12, No. 3, pp. 435–449.
42.
WuY.F.ZhouZ.Q.YangQ.D. and ChenW.Q. (2010). “On shear bond strength of FRP-concrete structures”, Engineering Structures, Vol. 32, No. 3, pp. 897–905.
43.
WuZ.S.YuanH.YoshizawaH. and KanakuboT. (2001). “Experimental/ analytical study on interfacial fracture energy and fracture propagation along FRP-concrete interface”, ACI Special Publication, Vol. 201, pp. 133–152.
44.
YangZ.J.ChenJ.F. and ProverbsD. (2003). “Finite element modelling of concrete cover separation failure in FRP plated RC beams”, Construction and Building Materials, Vol. 17, No. 1, pp. 3–13.
45.
YangZ.J.SuX.T.ChenJ.F. and LiuG.H. (2009). “Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials”, International Journal of Solids and Structures, Vol. 46, No. 17, pp. 3222–3234.
46.
YaoJ. (2004). Debonding Failures in Reinforced Concrete Structures Strengthened with Externally Bonded FRP Sheets/Plates, PhD Thesis, Department of Civil and Structural Engineering, The Hong Kong Polytechnic University, Hong Kong, China.
47.
YaoJ.TengJ.G. and ChenJ.F. (2005). “Experimental study on FRP-to-concrete bonded joints”, Composites Part B: Engineering, Vol. 36, No. 2, pp. 99–113.
