A new method of upgrading seismic performance for underground structures is proposed in this paper. Both single-story and double-story underground subway stations are studied. Using the famous single-story Daikai Station model, by which the reliability of the numerical model is verified, seismic efficiency of Shear Panel Damper (SPD) in underground structures is proven. Then, in order to design appropriate and efficient SPDs for underground structures, strength ratio, one of the design parameters, is employed to investigate the seismic performance of structures. The recommended optimum range of strength ratio is given. Afterwards, typical double-story three-span stations with different SPDs layout forms are analyzed to figure out the optimal placement of SPDs. And some interesting conclusions are obtained, which may provide a convenient way to design SPDs in multi-story underground structures.
AnX.H.ShawkyA.A. and MaekawaK. (1997). “The collapse mechanism of a subway station during the Great Hanshin Earthquake”, Cement and Concrete Composites, Vol. 19, No. 3, pp. 241–257.
2.
ApostolakisG. and DargushG.F. (2010). “Optimal seismic design of moment-resisting steel frames with hysteretic passive devices”, Earthquake Engineering & Structural Dynamics, Vol. 39, No. 4, pp. 355–376.
3.
AydinE.BodurogluM.H. and GuneyD. (2007). “Optimal damper distribution for seismic rehabilitation of planar building structures”, Engineering Structures, Vol. 29, No. 2, pp. 176–185.
4.
CaoB.Z.LuoQ.F.MaS. and LiuJ.B. (2002). “Seismic response analysis of Daikai subway station in Hyogoken-nanbu earthquake”, Earthquake Engineering and Engineering Vibration, Vol. 22, No. 4, pp. 102–107. (in Chinese)
5.
ChanR.W.K.AlbermaniF. and WilliamsM.S. (2009). “Evaluation of yielding shear panel device for passive energy dissipation”, Journal of Constructional Steel Research, Vol. 65, No. 2, pp. 260–268.
6.
ChenL.W. (2012). “Correlation theories and interaction rules of subsoil degradation and ground motions”, Recent Developments in World Seismology, Vol. 4, pp. 41–42.
7.
ChenZ.Y.BianG.Q. and HuangY. (2011). “Review on web buckling and hysteretic behavior of shear panel dampers”, International Journal of Advanced Steel Construction, HKISC, Vol. 9, No. 3, pp. 205–217.
8.
ChenZ.Y.GeH.B.KasaiA. and UsamiT. (2007). “Simplified seismic design approach for steel portal frame piers with hysteretic dampers”, Earthquake Engineering & Structural Dynamics, Vol. 36, No. 4, pp. 541–562.
9.
ChenZ.Y.GeH.B. and UsamiT. (2006). “Hysteretic model of stiffened shear panel dampers”, Journal of Structural Engineering, ASCE, Vol. 132, No. 3, pp. 478–483.
10.
DargushG.F. and SantR.S. (2005). “Evolutionary aseismic design and retrofit of structures with passive energy dissipation”, Earthquake Engineering & Structural Dynamics, Vol. 34, No. 13, pp. 1601–1626.
11.
DasB.M. (2008). Advanced Soil Mechanics, CRC Press, Florida, USA.
12.
DG/TJ08-2064-2009 (2010). Code for Seismic Design of Subway Structures, Shanghai Urban Constructions Communications, Shanghai, China. (in Chinese)
13.
GB50011 (2010). Code for Seismic Design of Buildings, China Architecture & Building Press, Beijing, China.
14.
GeH.B.ChenX. and MatsuiN. (2011). “Seismic demand on shear panel dampers installed in steel-framed bridge pier structures”, Journal of Earthquake Engineering, Vol. 15, No. 3, pp. 339–361.
15.
HuoH.BobetA.FernándezG. and RamirezJ. (2005). “Load transfer mechanisms between underground structure and surrounding ground: Evaluation of the failure of the Daikai Station”, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 12, pp. 1522–1533.
16.
IidaH.HirotoT.YoshidaN. and IwafujiM. (1996). “Damage to Daikai subway station”, Soils and Foundations, Special Issue, pp. 283–300.
17.
JGS-4001-2004 (2006). Principles for Foundation Designs Grounded on a Performance-based Design Concept, Japanese Geotechnical Society, Japan.
18.
JSSC (1998). Seismic Response and Design of Buildings with Viscous Damper, Tokyo: Japanese Society of Steel Construction, Tokyo, Japan.
19.
MatsumotoN.OkanoM.AritaH.SogabeM.WakuiH. and OhuchiH. (1999). “Seismic behavior of railway viaducts with steel dampers and braces”, Journal of Construction Engineering, Vol. 45A, pp. 1411–1422. (in Japanese)
20.
NakashimaM.AkazawaT. and TsujiB. (1995). “Strain-hardening behavior of shear panels made of low-yield steel. II: Model”, Journal of Structural Engineering, ASCE, Vol. 121, No. 12, pp. 1750–1757.
21.
NonakaT.UsamiT.SakamotoY. and IwamuraM. (2003). “Inelastic seismic behavior of deck type steel truss bridges under major earthquakes and a proposal for its seismic upgrading”, Journal of Construction Engineering-JSCE, Vol. 49A, pp. 531–542. (in Japanese)
22.
Parra-MontesinosG.J.BobetA. and RamirezJ.A. (2006). “Evaluation of soil-structure interaction and structural collapse in Daikai subway station during Kobe earthquake”, ACI Structural Journal, Vol. 103, No. 1, pp. 113–122.
23.
TakewakiI. (2000). “An approach to stiffness-damping simultaneous optimization”, Computer Methods in Applied Mechanics and Engineering, Vol. 189, No. 2, pp. 641–650.
24.
TakewakiI. and UetaniK. (1999). “Optimal damper placement for building structures including surface ground amplification”, Soil Dynamics and Earthquake Engineering, Vol. 18, No. 5, pp. 363–371.
25.
TanakaK.ToriiT.SakakiY. and KawaiH. (1997). “Study on practical application of damage tolerant structure with seismic control panel using low-yield-point steel to a high-rise steel building”, AIJ J. Technol. No. 5, pp. 126–131. (in Japanese)
26.
YingM.H. (2011). “Focus on Shanghai metro's 12th-plan period taking network operation security as a priority”, Traffic and Transportation, Vol. 27, No. 4, pp. 1–3. (in Chinese)
27.
ZhangC.F.AokiT.ZhangQ.J. and WuM.P. (2013). “Experimental investigation on the low-yield-strength steel shear panel damper under different loading”, Journal of Constructional Steel Research, Vol. 84, pp. 105–113.
28.
ZhangC.F.ZhangZ.S. and ShiJ.F. (2012). “Development of high deformation capacity low yield strength steel shear panel damper”, Journal of Constructional Steel Research, Vol. 75, pp. 116–130.
29.
ZhangR.H. and SoongT.T. (1992). “Seismic design of viscoelastic dampers for structural applications”, Journal of Structural Engineering, ASCE, Vol. 118, No. 5, pp. 1375–1392.
