Statistically based mathematical model of post-erectional columns out-of-plumb was taken as the basis for the formulation of rational criteria for control of skeletons of steel halls. The results of statistical analysis of a set of post-erectional measurements of out-of-plumb columns of 33 halls steel skeletons – with different: geometry, structure and destination were used.
Current and selected previous recommendations by standards of out-of-plumb tolerance of columns halls were subjected to critical analysis. The results obtained were compared with the results of the earlier analysis of the standard recommendations of the steel columns of multistory building frames.
BeaulieuD. and AdamsP.F. (1978). “The results of a survey on structural out-of-plumbs”, Canadian Journal of Civil Engineering, Vol. 5, No. 4, pp. 462–470.
3.
BridgeR.Q. and BizzanelliP. (1997). “Imperfections in steel structures”, Proceedings of SSRC Annual Technical Session and Meeting, Toronto, Canada, June, pp. 447–458.
4.
EN 1090 (2008). Execution of Steel Structures and Aluminum Structures – Part 2: Technical Requirements for Steel Structures, European Committee for Standardization, Brussels, Belgium.
5.
EN 1993–1 (1990). Eurocode 3: Design of Steel Structures. Part 1–1. General Rules and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
6.
Eurocode 3 (1984). Common Unified Rules for Steel Structures, European Committee for Standardization, Brussels, Belgium.
7.
FellerW. (1961). An Introduction to Probability Theory and its Applications, Vol. I, 2nd Edition, John Wiley and Sons.
8.
HimmelblauD.M. (1970). Process Analysis by Statistical Methods, John Wiley and Sons, New York.
9.
LindnerJ. and GietzeltR. (1984). “Evaluation of imperfections induced by columns out-of-plumb”, Stahlbau, pp. 97–98. (in German)
10.
MachowskiA. (2002). “Initial random out-of-plumbs of steel frame columns”, Archives of Civil Engineering, Vol. 48, No. 2, pp. 205–226.
11.
PapoulisA. (1965). Probability, Random Variables and Stochastic Processes, Mc Graw-Hill.
12.
PN-90-06200 (1997). Steel Building Structures, Execution and Acceptance Conditions, Basic Requirements, PKNMiJ, Poland. (in Polish)
13.
PN-B-06200 (1977): Steel Structures, Specifications and Tests, PKNMiJ, Poland. (in Polish)
14.
SedlacekG.TaylorC.UngermannD. and VerwiebeC. (1990). Background Document 5.08 for Eurocode 3 – Part 1. Imperfections for Compressed Members and Sway Frames, Aachen.
15.
SobczykM. (2004). Statistic, PWN Warsaw. (in Polish)
16.
ŻwirekP. (2010). Investigations and Modeling of Selected Imperfections of Hall Steel Frames, PhD Thesis, Cracow University of Technology, Poland. (in Polish)
