Abstract
Minimising the impact of music practice and “Garage Band” performances upon neighbours in a residential area is challenging in terms of noise emissions from musical instruments, but particularly so when drums and percussion instruments are involved. Normal residential building façades and roofing designs offer limited low frequency noise attenuation and domestic building construction methods can severely compromise the performance of seemingly adequate partition construction details. This paper presents the results of design, construction and testing activities for a private drum studio that was required to meet stringent boundary noise emission targets in order to comply with local council Development Application requirements. High transmission loss lightweight partition test data is provided for the as-built final installation, along with details of cavity absorption, panel damping and vibration isolation treatments that contributed to maximising façade sound reduction performance. A range of room internal absorption treatments, including low frequency “tube traps”, corner traps and diffusers were successfully employed to achieve compliance with BBC recommended reverberation times for small recording studios
Get full access to this article
View all access options for this article.