Experimental Study of the Low-Frequency Noise Characteristics of Empty and Fitted Workshops

Abstract

In order to investigate the temporal and steady-state low-frequency characteristics of sound in industrial workshops, measurements were made of reverberation times and sound-pressure levels in a machine shop and in a 1/8-scale-model workshop when empty and fitted. Low-frequency pure tones and octave-band noise were used as the source excitation. Fittings generally reduced reverberation times. In the empty machine shop, levels showed strong spatial variations due to modal effects, as expected. When fitted with machine tools, levels changed by up to 20 dB, and local variations increased, despite the fittings being small compared to the sound wavelengths. In the scale model, smaller and larger fittings were tested. Results for the model when empty and when fitted with the larger fittings were similar to those in the machine shop. With the smaller fittings, the results suggested that fittings can act to diffuse sound, reducing spatial variations. Tests were also done in an empty and fitted hemi-anechoic chamber to study the effect of fittings in the absence of the room. Fittings alone only slightly affected the sound field, demonstrating that modal effects are predominantly due to the room, possible modified by the presence of fittings.

Get full access to this article

View all access options for this article.

References

Hodgson

M. R.

, “Measurements of the influence of fittings and roof pitch on the sound field in panel-roof factories”, Appl. Acoust. 16(5) 369–391 (1983).

Hodgson

M. R.

, “Case history: Factory noise prediction using ray tracing – experimental validation and the effectiveness of noise control measures”, Noise Cont. Eng. J. 33(3) 97–104 (1989).

Hodgson

M. R.

, “On the accuracy of models for predicting sound propagation in fitted rooms”, J. Acoust. Soc. Am. 88(2) 871–878 (1989).

Hodgson

M. R.

, “Experimental evaluation of simplified methods for predicting sound propagation in industrial workrooms”, J. Acoust. Soc. Am. 103(4) 1933–1939 (1998).

Heerema

, and Hodgson

M. R.

, “Prediction, visualization and auralization of noise in industrial workrooms during computer walk-through”, Noise Cont. Eng. J. 47(2) 65–70 (1999).

Ondet

A. M.

, and Barbry

J. L.

, “Modelling of sound propagation in fitted workshops using ray tracing”, J. Acoust. Soc. Am. 85(2) 787–796 (1989).

, and Hodgson

M. R.

, “Incidence of low-frequency noise in ten worksites”, Research Report, University of British Columbia, 2002.

Guo

Pan

, and Hodgson

M. R.

, “Local or global control – the applicable active noise control strategy in enclosed environments”, Proc. Active 2002, Southampton, UK, 93–104 (2002).

D. S.

, and Hodgson

M. R.

, “Optimal active noise control in large rooms using a ‘locally-global’ control strategy”, J. Acoust. Soc. Am. 118(6) 3653–3661 (2005).

10.

Hodgson

M. R.

, and Orlowski

R. J.

, “Acoustic scale modeling of factories – Part I: Principles, instrumentation and techniques”, J. Sound Vib. 113(1) 29–46 (1987).

11.

Hodgson

M. R.

, and Orlowski

R. J.

, “Acoustic scale modeling of factories – Part II: 1:50 scale model investigations of factory sound fields”, J. Sound Vib. 113(2) 257–272 (1987).

12.

Orlowski

R. J.

, and Hodgson

M. R.

, “Acoustic scale modeling of factories – Part III: The potential of scale models for predicting the effect of noise control measures”, J. Sound Vib. 121(3) 525–545 (1988).