Modelling the Acoustical and Airflow Performance of Simple Lined Ventilation Apertures

Abstract

The pressure differences that can be used to drive a natural ventilation system are very small and thus large apertures are required to allow sufficient air to enter and leave a building to ensure good air quality or thermal comfort. Large apertures are potential acoustic weak points on a façade and may require some form of acoustic treatment such as absorbent linings, in which case the ventilator is similar to a short section of lined duct. In ducts, the performance of absorbent linings increases with the length of lining and the ratio of the length of lined perimeter to the cross sectional area of the duct. Thus, for a duct of a given cross sectional area, a lining is more effective for a duct with a high aspect ratio than for a duct with a square cross section. However, the high aspect ratio cross section will result in greater flow resistance and impede the airflow performance. In this paper numerical methods are employed to investigate the effect of different configurations of a lined aperture on the acoustical and ventilation performance of the aperture in order to establish the optimum configurations.

Get full access to this article

View all access options for this article.

References

de Salis

M.H.F.

Oldham

D.J.

, and Sharples

, Noise control strategies for naturally ventilated buildings. Building and Environment Vol 37, 471–484. (2002).

Oldham

D.J.

de Salis

M.H.F.

, and Sharples

, Reducing the ingress of urban noise through natural ventilation openings. Indoor Air, Vol 14, Supplement 8, 118–126, (2004).

Kang

, and Brocklesby

M.W.

, Feasibility of applying micro-perforated absorbers in acoustic window systems. Applied Acoustics, 66, 669–689, (2004).

Asdrubali

, and Cotana

, Influence of filtering system on high sound insulation ventilating windows, Proceedings of Internoise 2000, Nice, France, (2000).

Cotana

, Experimental data and performances of new high sound insulation ventilating windows, Proceedings of Internoise 1999, Florida, USA, 995–998, (1999).

Field

C.D.

, and Fricke

F.R.

, The attenuation of road traffic noise entering buildings through ventilation openings using quarter wave resonators: Mechanisms of attenuation and model experiments., Building Acoustics 2, 625–635, (1995).

Field

C.D.

, and Fricke

F.R.

, Theory and applications of quarter-wave resonators: A prelude to their use for attenuating noise entering buildings through ventilation openings, Applied Acoustics 53,117–132, (1998).

Mohajeri

, Investigation of an intelligent control system for attenuation of transport noise, PhD Dissertation, University of Sydney, (1998).

Maillard

, and Guigou-Carter

, Study of passive/active control on openings for natural ventilation in buildings, Proceedings of Internoise 2000, Nice, France, (2000).

10.

Kang

, and Brocklesby

M.W.

, Application of micro-perforated absorbers in developing novel window systems for optimum acoustic, ventilation and daylighting performance, Proceedings of the Institute of Acoustics (IOA) (UK) 25 (7), 47–54, (2003).

11.

Kang

, and Brocklesby

M.W.

, Design of acoustic windows with micro-perforated absorbers, Proceedings of the 18th International Conference on Acoustics (ICA), Kyoto, Japan, II-1223-1224, (2004).

12.

Sysnoise 5.6 Manual. LMS International N.V. Leuven, Belgium, (2005).

13.

Fluent 5 Manual. Fluent Inc. Lebanon, NH, USA, (2005).

14.

Horoshenkov

K.V.

, and Swift

M.J.

, The acoustic properties of granular materials with pore size distribution close to log-normal, Journal of the Acoustical Society of America, Vol 110(5), 2371–2378, (2001).

15.

Horoshenkov

K.V.

Attenborough

, and Chandler-Wilde

S.N.

, Pade approximants for the acoustic properties of rigid frame porous materials with pore size distributions, Journal of the Acoustical Society of America, 104, 198–209, (1998).

16.

Seybert

Seman

R.A.

, and Lattuca

M.D.

, Boundary element prediction of sound propagation in ducts containing bulk absorbing materials. Transactions of the ASME, 120, 976–981, (1998).

17.

“Measurement of sound insulation in buildings and of building elements. Laboratory measurement of airborne sound insulation of small building elements”, BS EN 20140.10:1992 Acoustics. British Standards Institution, London, (1992).

18.

“Rating of sound insulation in buildings and of building elements. Airborne sound insulation”. BS EN ISO 717-1:1997 Acoustics. British Standards Institution, London, (1997).

19.

“Air infiltration”, CIBSE Guide A4, Chartered Institute of Building Services Engineers, London, (1976).

20.

“Ventilation for buildings – Performance testing of components/products for residential ventilation. Part 1: Externally and internally mounted air transfer devices”. BS EN 13141-1: British Standards Institution, London, (2004).