A Finite Element Method (FEM) is employed to model floor vibration induced by foot steps. This numerical model is validated by comparison of the vibration values obtained from the prediction model and the measurements. Regression analysis is employed for the validation. A regression correlation value R2 of 0.82 is calculated, which indicates the acceptability of the numerical model. The model may provide designers with helpful information in reducing floor vibration.
ChungS.C.ChangC.M.LinF.M., and LeeU.C., “A prediction of the influencing factors of floor vibration”, Building Acoustics, 5(2). pp.103–121, (1999).
2.
SzilardRudolph, “Theory and Analysis of Plate – Classical and Numerical Methods”, PRENTICE-HALL, INC., Englewood Cliffs, New Jersey, (1974).
3.
HiroshiKushida, “Engineering of Environmental Vibration”, Sciences & Engineering Book Company, Japan, (1997).
4.
ToshiyukiSatoHiroshiKushidaMasaharuTuchiya, and HidetoTanaka, “The Design to Prevent Vibration of Minute Environment Equipment -An Application of data to already existing Equipment”Summaries of Technical Papers of the Annual Meeting of the Architectural Institute of Japan, (1996).
5.
ChiangC.M.LinF.M.ChungS.C., and ChungC.M., “Prediction of Impact Vibration of Raised Access Floor Models”, WESTPRAC VII Conference2000.
6.
SteelJ.A., and CraikR.J.M., “Statistical Energy Analysis of Structure-Borne Sound Transmission by a Finite Element Method”, Journal of Sound and Vibration;178(4), (1994)
7.
KatsuoInoueShoKimuraAkihiroMaeharaHideoWatanabe, and AkihiroMatsuoka, “Impact Force Characteristics of Sole by Walking – Study of the residential floor vibration characteristics and floor impact sound insulation performance taking foot steps sensation into consideration. Part1”, Journal of Architecture Planning and Environmental Engineering, No.477, 1–10, (1995)
8.
GabraithF.W., and BartonM.V., “Ground Loading from Footsteps,”Journal of the Acoustical Society of America, Part2, 48(5), pp. 1288–1292, (1970).
9.
TakabatakeHideoImaizumiTakatuki, and OkatomiKunihiro, “Simplified Analysis of Rectangular Plates with Stepped Thickness,”Journal of Structural Engineering, pp.28–38, (1995).
10.
CremerL., and HecklM., “Structure-Borne Sound”, Springer-VerlagBerlin, Heidelberg, (1988)
11.
KimuraSho, and InoueKatsuo, “Practical Calculation of Floor Impact Sound by Impedance Method”, Journal of Applied Acoustics, 26(4), pp.263–292, (1989).
12.
YangT. Y., “Finite Element Structural Analysis”, Prentice-Hall Inc., Englewood Cliffs, New Jersey, (1986).
