Control of Shear Cutting Noise: Effectiveness of Passive Control Measures

Abstract

In an attempt to reduce noise from roll former shears three noise abatement enclosures of different designs and sheet dampers were assessed. Results indicate that only a noise reduction of 5dB can be achieved at the operator position by noise abatement enclosures, virtually independent of their designs and materials. This rather poor performance of enclosures is basically caused by structure-borne paths whereby vibrations are transmitted through the metal sheet product itself from the inside of the enclosure to the outside. Sheet dampers which have been designed to reduce the impact induced vibrations of the sheet product achieves a similar noise reduction as the enclosures but at about one quarter of the cost.