In this article, a fuzzy PI gain scheduler for a vector controller is developed to control a doubly-fed induction generator used in a variable speed wind turbine. Effects of both main flux and leakage flux saturation are considered in the machine model in order to obtain more realistic results. Extensive simulations have been carried out on the proposed system to investigate its dynamic performance. A comparison between the developed vector controller with the proposed fuzzy PI gain scheduler and the same vector controller with a conventional PI controller employing fixed gains shows that using the fuzzy PI gain scheduler, the system has better performance and faster dynamic response without any steady-state error.
ZavadilR.MillerN.EllisA.MuljadiE. (2005): Making connections. IEEE Power and Energy Magazine, 3(6): 26–37.
2.
PoddarG.JosephA.UnnikrishnanA. K. (2003): Sensorless variable-speed controller for existing fixed-speed wind power generator with unity-power-factor operation, IEEE Trans. on Industrial Electronics, 50: 1007–1015.
3.
WekhandeS.AgarwalV. (2001): Simple control for a wind-driven induction generator, IEEE Industry Applications Magazine, 7: 44–53.
4.
MullerS.DeickeM.De DonckerR. W. (2002): Doubly fed induction generator systems for wind turbines, IEEE Industry Applications Magazine, 8: 26–33.
5.
AkhmatovV. (2002): Variable-speed wind turbines with doubly-fed induction generators Part I: Modelling in dynamic simulation tools, Wind Engineering, 26: 85–108.
6.
HasenA. D.SørensenP.IovF.BlaabjergF. (2004): Control of variable speed wind turbines with doubly-fed induction generators, Wind Engineering, 28: 411–434.
7.
SpeeR.BhowmikS.EnslinJ. H. R. (1995): Novel control strategies for variable-speed doubly fed wind power generation systems, Renewable Energy, 6: 907–915.
8.
AtkinsonD. J.LakinR. A.JonesR. (1997): A vector-controlled doubly-fed induction generator for a variable-speed wind turbine application, Trans. Inst. Meas. Contr., 19: 2–12.
9.
PeñaR. S.ClareJ. C.AsherG. M. (1996): Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation, IEE Proc. Electric Power Applications, 143(3): 231–341.
10.
TapiaA.TapiaG.OstolazaJ. X.SáenzJ. R. (2003): Modeling and control of a wind turbine driven doubly fed induction generator, IEEE Trans. on Energy Conversion, 18: 194–204.
11.
UctugM. Y.EskandarzadehI.InceH. (1994): Modelling and output power optimization of a wind turbine driven double output induction generator, IEE Proc. on Electric Power Applications, 141: 33–38.
12.
BrekkenT.MohanN. (2003): A novel doubly-fed induction wind generator control scheme for reactive power control and torque pulsation compensation under unbalanced grid voltage conditions, IEEE 34th Annual Power Electronics Specialist Conf., 2: 760–764.
13.
TangY.XuL. (1995): A flexible active and reactive power control strategy for a variable speed constant frequency generating system, IEEE Trans. on Power Electronics, 10: 472–478.
14.
VasP. (1981): Generalized transient analysis of saturated a.c. machines, Archiv Für Elektrotechnik, 63: 57–62.
15.
RobertJ. (1986): On the transient performance of saturated electrical machines with cylindrical rotor, ICEM, Munchen, 469–471.
16.
de JesusJ. M. F. (1988): A model for saturation in induction machines, IEEE Transactions on Energy Conversion, 3: 682–688.
17.
HalleniusK. E. (1986): On the theory of main flux saturation in smooth-air-gap electrical machines, Archiv Für Elektrotechnik, 69: 137–142.
18.
LeviE. (1995): A unified approach to main flux saturation modelling in D–Q axis models of induction machines, IEEE Transactions on Energy Conversion, 10: 455–461.
19.
VasP.DeleroiW.BrownJ. E. (1984): Transient analysis of smooth-air-gap machines incorporating the efffects of main and leakage flux saturation, ICEM, Lausanne, 269–272.
20.
BispoD.MartinsL.NetoJ. T.de Resendede AndradeD. A. (2001): A new strategy for induction machine modeling taking into account the magnetic saturation, IEEE Transactions on Industry Applications, 37: 1710–1719.
21.
MostafaA. S.MohamadeinA. L.RashadE. M. (1993): Analysis of series-connected wound-rotor self-excited induction generator, IEE Proceedings on Electric Power Applications, 140: 329–336.
22.
AlghuwainemS. M. (1999): Steady-state analysis of a self-excited induction generator including transformer saturation, IEEE Trans. on Energy Conversion, 14: 667–672.
23.
SalamaM. H.HolmesP. G. (1996): Transient and steady-state load performance of a stand-alone self-excited induction generator, IEEE Proceedings on Electric Power Applications, 143: 50–58.
24.
SeyoumD.GranthamC.RahmanF. (2001): The dynamics of an isolated self-excited induction generator driven by a wind turbine, The 27th Annual Conference of the IEEE Industrial Electronics Society, 2: 1364–1369.
25.
RajakarunaS.BonertR. (1993): A technique for the steady-state analysis of a self-excited induction generator with variable speed, IEEE Transactions on Energy Conversion, 8: 757–761.
26.
KundurP. (1993): Power System Stability and Control, New York; McGraw-Hill.
27.
RogersG. J.BenaragamaD. S. (1978): An induction motor model with deep-bar effect and leakage inductance saturation, Archiv Für Elektrotechnik, 60: 193–201.
28.
EPRI Report of Project 1208–9, (1992): Extended transient-midterm stability program, Final report, prepared by Ontario Hydro, December 1992.
29.
Van De VilleD.NachtegaelM.Van der WekenD.KerreE. E.PhilipsW.LemahieuI. (2003): Noise reduction by fuzzy image filtering, IEEE Transactions on Fuzzy Systems, 11: 429–436.
30.
LiewA. W. C.LeungS. H.LauW. H. (2000): Fuzzy image clustering incorporating spatial continuity, IEE Proceedings on Vision, Image and Signal Processing, 147: 185–192.
31.
MonsefH.RanjbarA. M.JadidS. (1997): Fuzzy rule-based expert system for power system fault diagnosis, IEE Proceedings on Generation, Transmission and Distribution, 144: 186–192.
32.
FerreroA.SangiovanniS.ZappitelliE. (1995): A fuzzy-set approach to fault-type identification in digital relaying, IEEE Transactions on Power Delivery, 10:169–175.
33.
VasP.StronachA. F.NeurothM. (1997): Full fuzzy control of a DSP-based high performance induction motor drive, IEE Proceedings on Control Theory Appl., 144: 361–368.
34.
SinghB. N.SinghBhimSinghB. P. (1999): Fuzzy control of integrated current-controlled converter-inverter-fed cage induction motor drive, IEEE Transactions on Industry Applications, 35: 405–412.
35.
GrabowskiP.KazmierkowskiM.BoseB.BlaabjergF. (2000): A simple direct-torque neuro-fuzzy control of PWM-inverter-fed induction motor drive, IEEE Transactions on Industrial Electronics, 47: 863–870.
36.
ZidaniF.BenbouzidM. E. H.DialloD.Nait-SaidM. S. (2003): Induction motor stator faults diagnosis by a current Concordia pattern-based fuzzy decision system, IEEE Transactions on Energy Conversion, 18: 469–475.
37.
HilloowalaR. M.SharafA. M. (1996): A rule-based fuzzy logic controller for a PWM inverter in a stand alone wind energy conversion scheme, IEEE Transactions on Industry Applications, 32: 57–65.
38.
MashalyH. M.SharafA. M.El-SattarA. A.MansourM. M. (1994): Implementation of a fuzzy logic controller for wind energy induction generator DC link scheme, Proceedings of the Third IEEE Conference on Fuzzy Systems, 2: 978–982.
39.
SimoesM. G.BoseB. K.SpiegelR. J. (1997): Fuzzy logic based intelligent control of a variable speed cage machine wind generation system, IEEE Transactions on Power Electronics, 12: 87–95.
40.
SimoesM. G.BoseB. K.SpiegelR. J. (1997): Design and performance evaluation of a fuzzy-logic-based variable-speed wind generation system, IEEE Transactions on Industry Applications, 33: 956–965.
41.
ChenZ.GomezS. A.McCormickM. (2000): A fuzzy logic controlled power electronic system for variable speed wind energy conversion systems, Eighth International Conference on Power Electronics and Variable Speed Drives, 114–119.
42.
PratsM. M.CarrascoJ. M.GalvanE.SanchezJ. A.FranqueloL. G. (2002): A new fuzzy logic controller to improve the captured wind energy in a real 800 kW variable speed-variable pitch wind turbine, IEEE 33rd Annual Power Electronics Specialists Conference, 1: 101–105.
43.
TeeterJ.ChowM.BrickleyJ. J.Jr. (1994): Use of a fuzzy gain tuner for improved control of a DC motor system with nonlinearities, Proceedings of the IEEE International Conference on Industrial Technology, 258–262.
44.
HeS.TanS.XuF.WangP. (1993): Fuzzy self-tuning of PID controllers, Fuzzy Sets and Systems, 56: 37–46.
45.
ShinK. G.CuiX. (1991): Design of a knowledge-based controller for intelligent control systems, IEEE Transactions on Systems, Man. and Cybernetics, 21: 368–375.
46.
LeeJ. (1993): On methods for improving performance of PI type fuzzy logic controllers, IEEE Transactions on Fuzzy Systems, 1: 298–301.
47.
KoskoB. (1992): Neural Networks and Fuzzy Systems, Prentice-Hall, Englewood Cliffs, New Jersey.
48.
VictorJ.DouardaA. (1995): Adaptive scaling factors algorithm for the furzy logic controller, Simulation Practice and Theory, Elsevier Science, 121–136.
49.
TsengChris H.HwangV. H. (1993): Servocontroller tuning with furzy logic, IEEE Transactions on Control Systems Technology, 1: 262–269.
50.
TzafestasS.PapanikolopoulorN. P. (1990): Incremental fuzzy expert PID control, IEEE Trans. an Industrial Electronics, 37: 365–371.
51.
ZhaaZ. Y.TomizukaM.IsakaS. (1993): Fuzzy gain scheduling of PID controllers, IEEE Trans. on Systems, Man. and Cybernetics, 23:1392–1398.
52.
RomeralL.LlmuetJ.AldabasE.AriasA. (2000): A simple fuzzy adaptive speed controller, Proc. of IEEE Annual Meeting Industry Applications Conf., 2: 1249–1256.
