Wind Turbine Structural Dynamics – A Review of the Principles for Modern Power Generation,Onshore and Offshore

Abstract

Wind turbines for electricity production have two seemingly opposing constraints; they need to be structural secure yet of low cost. To meet the first constraint, it would be an obvious choice to design a stiff structure of consequently large mass but this would drive up the cost. By reducing the mass a more cost effective turbine can be realized. However, such lightweight structures are by definition more flexible. To design a cost effective flexible system, thorough understanding of the dynamics is essential. This paper reviews the theoretical basics of the dynamic design options and applies these to realistic situations, including offshore machines under wave action. The wind energy converter and the support structure form an integrated dynamic system that must be developed in mutual interdependency and close co-operation. This paper provides a contribution to this integration process by extending the design approach initiated in the Opti-OWECS study [1] and the work of Kühn [2].

Get full access to this article

View all access options for this article.

References

Ferguson

M.C.

(ed.) et al., Opti-OWECS Final Report Vol. 4: A typical Design Solution for an Offshore Wind Energy Conversion System. Delft University of Technology, Institute for Wind Energy, 1998.

Kühn

, Dynamics and Design Optimisation of Offshore Wind Energy Conversion Systems PhD. Thesis, Delft University of Technology, Institute for Wind Energy, May 2001.

van Kuik

G.A.M.

Are Wind Turbines Growing too Fast? In

Proceedings of the European Wind Energy Conference and Exhibition, Copenhagen, Denmark, July 2–6, 2001.

Molenaar

D-P.

Dijkstra

Sj.

, Modelling the structural dynamics of flexible wind turbines. In Proceedings of European Wind Energy Conference and Exhibition, Acropolis Convention Centre, Nice, France, March 1–5, 1999.

Vugts

J.H.

Considerations on the dynamics of support structures for an OWEC Delft University of Technology, Faculty of Civil Engineering and Geoscience, Section Offshore Technology, 2000.

Betz

Schraubenpropeller mit geringstem energieverlust Gottinger Nachr., Germany, 1919.

van der Tempel

Lifetime Fatigue of an Offshore wind Turbine Support Structure Delft University of Technology, Faculty of Civil Engineering and Geoscience, Section Offshore Technology & Section Wind Energy, May 2000.

Zaaijer

M.B.

Sensitivity Analysis for Foundations of Offshore Wind Turbines Delft University of Technology, Faculty of Civil Engineering and Geoscience, Section Wind Energy, Task 4.1 of OWTES project, 2002.

Will

S.A.

Edel

J.C.

Kallaby

des Deserts

L.D.

Design of the Baldplate Compliant Tower, 1999 Offshore Technology Conference No. 10915.