A case study was performed on a commercially available low cost wind turbine. The turbine was tested in a wind tunnel with up to 13 m/s wind speed. The blade characteristics were measured as a function of wind speed, yaw angle, with and without a nose cone, and compared to theoretical models. Practical issues are noted as required for reliable operation, in particular the design of blades and their attachment to the turbine.
Get full access to this article
View all access options for this article.
References
1.
BurtonT.SharpeD.JenkinsN.BossanyiE., “Wind Energy Handbook”, John Wiley and Sons, 2001.
2.
WoodD. H., “Some effects of compressibility on small horizontal axis wind turbines”, Renewable Energy, vol. 10, No. 1, 1997, pp 11–17.
3.
ElizondoJ.MartinezJ.ProbstO., “Experimental study of a small wind turbine for low and medium wind regimes”, International Journal for Energy Research, 2009, Vol. 33, pp 309–326.
4.
ButterfieldC.P.ScottG.MusialW., “Comparison of wind tunnel airfoil performance data with wind turbine blade data”, Journal of Solar Energy Engineering, May 1992, Vol. 114, pp 119–124.
5.
CorbusD.HansenA. C.MinnemaJ., “Effect of blade torsion on modeling results for the small wind research turbine”, Journal of Solar Energy Engineering, vol. 128, Nov. 2006, pp 481–486.
6.
CotonF.WangT., “The prediction of horizontal axis wind turbien performance in yawed flow using an unsteady prescribed wake model”, Proc. Inst. Mech. Engrs., vol. 213, part 1, 199, pp 33–43.
7.
PedersonT., “On wind turbine power performance measurements at inclined flow”, Wind Energy, vol. 7, 2004, pp 163–176.
8.
BechlyM.ClausenP.EbertP.WoodD., “Field testing of a prototype 5 kW wind turbine”, British Wind Energy Association Annual Conference, 1996, pp 103–110.
9.
MediciD., “Wind turbine wakes - control and vortex shedding”, KTH Mechanics Report, Royal Institute of Technology, Stockholm, Sweden, March 2004.
