Review of Recent Trends in the Planning,Analysis,Design and Construction of Space Frame Roofs for Aircraft Hangars

Joyner K.J. , “The Provision of Hangerage Facilities”, Tubular Structures 15, March 70.

Rudolph Peter ; A “Three Dimensional” Concept for Multi-Form Hangars, Airport Forum, no. 4/1980.

Taylor R. G. , “Construction and Erection”, Tubular Structures no: 15, March 70.

Kubik L.A. Kubik M.L. Chilton J.C. , “Design and Construction of the CUBIC Space Frame Roof, Maintenance Hangar, Stanstead Airport” Vol 1, Projects and Project Studies, Proceedings of the IASS Symposium on “Spatial Structures at the Turn of the Millennium”, Copenhagen, Denmark, 2–6, Sep, 91.

Jumbo-Hangar in Teheran, Iran, Converse sequence of construction, first the Roof and then the Walls”, Airport forum, vol 84, number 3.

Luke S , “British Airways Heavy Maintenance Hangar -Cardiff, Wales Airport, Tubular Structures V, Edited by Coutie M.G. Davies G. , 1993 E&FN span, London.

Makowski Z.S. “Feasibility Study, Design and Analysis”, Tubular Structures 15, March 70.

Bunni U.K. Disney P Makowski Z.S. , “Multi-layer Space Frames”, A report on an investigation on triple-layer grids carried out for CONSTRADO at the Space Structures Research Centre of the University of Surrey.

Katsuo Nakata, Yoshikatsu Tsuboi and Ichiro Imai; Paper M1: Design and Construction of Aircraft hangars in Japan -Part 1: “Some Considerations in Aircraft Hangars as Large Span Space Structures”, Vol II, p.879. Proceedings of IASS Symposium on “Innovative Applications of Shells and Spatial Forms”, Bangalore, India, 1988.

Ichiro Imai, Akira Suzuki, Yoshihito Tsukada and Yoshikatsu Tsuboi; Paper M3, “Design and Construction of Aircraft hangars in Japan - Part 3: Design and Construction of Huge Space Frame Roof Using Diagonal Grid Beam Truss for Jet Hangars”, Proceedings of the IASS Symposium on “Innovative Applications of Shells and Spatial Forms”, Bangalore, India, 1988, Vol II p.895.

Kubadera Isao, Yoshikatsu Tusuboi and Ichiro Imai., Paper M4 “Design and Construction of Aircraft Hangars in Japan”, Part 4: “Design and Construction of the Hangar for Overhauling in Thin Shell Construction”, Proceedings of the IASS Symposium on “Innovative Applications of Shells and Spatial Forms”, Bangalore, 1988, p. 907.

Brochure on Space Structures published by Tomoe Corporation, Tokyo, Japan, p. 84.

Iwata Kamiyama K. , “Critical study of NS Space Truss System”, Proceedings of the Fourth International Conference on Space Structures, University of Surrey, Vol 2, p. 1417, Edited by Parke G.A.R. Howard C.M.

Nooshin Hoshyar , “Formex Configuration Processing in Structural Engineering, Elsevier Applied Science Publishers, London and New York, 1984.

Nooshin H. , “The Formex Approach”, Invited Lecture at the International Colloquium on Space Structures for Sports Buildings, Beijing, October, 1987, Bulletin of the International Association for Shell and Spatial Structures, no: 96, Volume XXIX - 1, April 88.

Mitsuru Ishigaya , Ichiro Imai, Hiroyuki Seki and Ryuichi Kosaka, Paper M.2., “Design and Construction of Aircraft Hangars in Japan-Part 2”. Proceedings of IASS Symposium, Bangalore, 1988, pp. 885–94.