Influence of Geometrical Parameters on Behaviour of Reticulated Timber Domes

Abstract

Domes are very efficient structural systems for long clear span buildings. The introduction of laminated timber highlighted the economic advantages of this material and led to the use of timber domes even for very large spans. In this paper, reticulated timber domes of triangular network shape with decking and bottom tension ring are considered. These types of domes have high stiffness in all directions along the surface and are kinematically stable. The dome is subjected to uniformly distributed load over entire structure. The dome model is generated with a preprocessor program called DOME-IN and analysed with ABAQUS. The focus of this paper is to evaluate the behaviour of reticulated timber domes with respect to: (a) height-diameter ratio of the dome, H/D; (b) straight relative curved types of main beams in the triangular networks versus mesh density; (c) perpendicular relative parallel types of purlin arrangements in the triangular networks versus the number of purlins; and (d) mesh density of main network members or size of triangular networks. The influence of these parameters on relative maximum deflection of the dome, relative critical pressure for global buckling of the dome, relative maximum axial forces and relative maximum bending moments in the network members, is evaluated. It is found that: (a) the optimum height-diameter ratio is H/D ≈ 0.3; (b) that straight beams in the triangular networks are preferred to curved beams, especially for higher mesh densities;(c) that purlins perpendicular to the latitudinal beams are preferable to purlins parallel to the latitudinal beams if there is a decking that provides bracing to the system; and (d) mesh densities with six sectors (n = 6) (lowest number of practical interest) and as many divisions of the arc beam and of the sector of the ring beam (m = k > 4), which is necessary in order to meet the design criteria for the dome, can be recommended.

Keywords

Space structures reticulated domes geometrical parameters

Get full access to this article

View all access options for this article.

References

Davies

R. M.

(ed.), Space Structures, International Conference on Space Structures, University of Surrey, September 1966, Blackwell Scientific Publications, Oxford, 1967.

Makowski

Z. S.

, Analysis, design and construction of braced domes, Granada Publishing Ltd., 1984.

Zetlin

, A Space Frame Forecast, Civil Engineering, ASCE, August, 1985, pp. 50–54.

Short Reports, lnternational Journal of Space Structures, Vol. 3, No. 2, 1988.

Pirner

Naprstek

, A Large Span Timber Dome, International Journal of Space Structures, Vol. 3, No. 2, 1988, p. 74.

Short Reports, Some Shell and Spatial Structures in the USA, International Journal of Space Structures, vol. 3. No.4, 1988, p. 244.

Subramanian

Ganguly

K. K.

, Steel Dome of Awaharlal Nehru Indoor Stadium, International Journal of Space Structures, Vol. 3, No. 4, 1988.

60 Meter Diameter Wooden Dome, Proceedings of 1991 International Timber Engineering Conference, London.

Shen

S. Z.

Lan

T. T.

, “A Review of the Development of Spatial Structures in China”, International Journal of Space Structures Vol. 16, No. 3, 2001, pp. 157–172.

10.

Pan

Girhammar

U. A.

, Effect of Ring Beam Stiffness on Behaviour of Reticulated Timber Domes, Submitted for publication.

11.

Girhammar

U.A.

, Design of a Glulam Dome in Borlange of 123 m Span Length, Martinson AB, Teknisk rapport 88:2, Bygdsiljum, 1988 (in Swedish) (internal report).

12.

Tongtoe

, Failure Prediction of Spatial Wood Structures: Geometric and Material Nonlinear Finite Element Analysis, Virginia Polytechnic Institute and State University, Department of Civil Engineering, Doctoral Dissertation, 185 p., April 1997.

13.

Pan

D. H.

, DOME-IN – A Preprocessor Program for Reticulated Dome Calculations, Umeå University, Department of applied Physics & Electronics, Civil Engineering, Report 1994:3, Umeå 1994.

14.

Pan

D. H.

, Analysis of Built-Up Timber Structural Systems - Specifically Reticulated and Composite Structures, Umea University, Department of Applied Physics and Electronics, Civil Engineering, Doctoral Dissertation, Umea, 2002.