Teaching Aspects of Space Structure Behaviour at Wollongong

Abstract

The purpose of this paper is to present an overview of the areas of the four-year undergraduate course in Civil Engineering at the University of Wollongong that are relevant to the teaching of material related to space structures. The Civil Engineering course at Wollongong is a general course in civil engineering leading to a Bachelor of Engineering (Civil) Degree. The areas covered in this paper refer only to those parts of the undergraduate course with a structural bias, and particularly those areas relevant to pin-jointed space truss behaviour, mechanics and design. Brief mention is made to the early year teaching that is of relevance, and then the attention is given to the basic structural mechanics that forms the basis for project work in the final year. This latter work forms the principal part of the paper.

Get full access to this article

View all access options for this article.

References

Calladine

C.R.

(1978). “Buckminster Fuller's tensegrity structures and Clerk Maxwell's rule for the construction of stiff frames.” Int. J. of Solids Structures, Vol.14, No.3, 161–172.

Abu-Mahmoud

(1988). “Effect of prestressing on the ultimate load capacity of space trusses.” B.E. (Civil) Thesis, Dept. Civil and Mining Engineering, University of Wollongong.

Wong

Y.K.

(1989). “Stability of tension structures.” B.E. (Civil) Thesis, Dept. Civil and Mining Engineering, University of Wollongong.

Daly

C.W.

(1990). “Stability of tension structures.” B.E. (Civil) Thesis, Dept. Civil and Mining Engineering, University of Wollongong.

Preller

A.C.

(1992). “Deployable space structures.” B.E. (Civil) Thesis, Dept. Civil and Mining Engineering, University of Wollongong.

Miura

Furuya

(1985). “Variable geometry truss and its applications to deployable truss and space crane arm.” Acta Astronautica, Vol. 12, 509–607.

Teh

L.H.

(1993). “Computer simulation of deployable structures.” B.E. (Civil) Thesis, Dept. Civil and Mining Engineering, University of Wollongong.

Yang

A.T.

(1963). “Application of quaternion algebra and dual numbers to the analysis of spatial mechanisms.” Eng. Sc.D Thesis, Columbia University.

Quinn

(1997). “Space truss formation.” B.E. (Civil) Thesis, Dept. Civil and Mining Engineering, University of Wollongong.

10.

Morschel

(1997). “Ultimate loading of a dome space truss shaped by post-tensioning.” B.E. (Civil) Thesis, Dept. Civil and Mining Engineering, University of Wollongong.