A novel method for the production of metal-doped activated carbons was developed. Evaluation of the materials produced showed that the metals were well dispersed throughout the carbon pore structure and had a high degree of accessibility. The filtration performance of these materials was assessed against HCN using inverse gas chromatography. The performance was affected both by the selection of metals and the conditions used in the production of the carbon. In-depth studies varying the synthesis parameters were performed with the aim of optimising the manufacturing process. Significant HCN adsorption capacity was developed which exceeded that of the current best available ASC-type carbons.
BansalR.C.DonnetJ.-B.StoeckliF. (1988) Active Carbon, Marcel Dekker, New York.
6.
BarnesP.A.DawsonE.A. (1994) J. Thermal Anal.41, 621.
7.
BarnesP.A.DawsonE.A. (1995) Preparation of Catalysts VI, Scientific Bases for the Preparation of Heterogeneous Catalysts, Vol. 91 of Studies in Surface Science and Catalysis, PonceletG.MartensJ.DelmonB.JacobsP.A.GrangeP., Eds, Elsevier, Amsterdam, pp. 361–370.
8.
BarnesP.A.DawsonE.A.MidgleyG. (1992) J. Chem. Soc., Faraday Trans. 88, 349.
GrabenstetterR.J.BlacetF.E. (1946) Military Problems with Aerosols and Non-persistent Gases, Summary Tech. Rep. Div. 10, Vol. 1, National Defense Research Committee, Washington, DC.
13.
GreggS.J.SingK.S.W. (1982) Adsorption, Surface Area and Porosity, Academic Press, London.
14.
Rodriguez-ReinosoF. (1977) Introduction to Carbon Technologies, MarshH.HeintzE.A.Rodriguez-ReinosoF., Eds, University of Alicante Press, Alicante, Spain.
15.
SatterfieldC.N. (1991) Heterogeneous Catalysis in Industrial Practice, McGraw-Hill, New York.
Van WeertG.De JongI. (1992) Emerging Process Technologies for a Cleaner Environment, Soc. Mining Metallurgy & Exploration Inc., Littleton, WV, pp. 161–165.
18.
WilliamsT.H. (1975) PhD Thesis, University of Bath, UK.
