In the present research the feedforward method of Active Noise Control (ANC) using Phase Shift Network (PSN) has been proposed for reducing noise generated by a hydraulic Surface Grinder. The PSN was a simple network whose function was to change the phase of the input wave. A passive damping material was used to prepare a duct of 150 mm × 150 mm × 1960 mm for converting multidimensional random noise into a single dimension. The duct was also utilized for housing two speakers employed in the ANC system. The system when installed on the grinder resulted in a total noise reduction of 13.1 dB(A).
National Institute on deafness and other communication disorders, Noise Induced Hearing Loss. NIH Publication No. 97-4233, 1999.
2.
BergerE.H., Hearing protection devices. In: BergerEHRoysterLHRosterJ.D.DriscollDP, and LayneM, Eds. The Noise Manual. Fairfax, VA. American Industrial Hygiene Association, 2000, 429–432.
3.
Occupational safety and Health Administration, Occupational Noise Exposure Standard, 29CFR Chapter XVIII, 1983, Part 1910.95.
4.
PrinceM.M.StaynerL.T.SmithR.J. and GilbertS.J., A re-examination of risk estimates from the NIOSH Occupational Noise and Hearing Survey, Journal of Acoustical Society of America, 1997, Vol.101 (2), 950–963.
5.
NelsonP.A. and ElliottS.J., Active Control of Noise, New York: Academic Press, 1992.
6.
KuoS. M. and YangY., Broadband adaptive noise equalizer, IEEE Signal Processing Lett., 1996, Vol.3, 234–235.
