A fibre-optic accessory with a linear drive transport system has been coupled to a near infrared (NIR) instrument to enable solid samples, in this instance increment cores from standing trees, to be scanned at 1 mm increments along the length of the sample. This allows the NIR prediction of wood properties (oven-dry chemical composition and microfibril angle) to be undertaken so that the radial profile of chemistry or microfibril angle can be determined from the pith to the bark. Calibration models provided prediction errors for microfibril angle in Pinus radiata softwood of 4.1° while for Eucalyptus globulus the error is 3.9°. The errors for prediction of chemical composition in Pinus radiata are 0.2% (arabinose) 1.1% (galactose), 2.3% (glucose), 0.7% (mannose), 0.7% (xylose) and 1.6% (lignin).
WallbäcksL.EdlundU.NordénB. and BerglundI., “Multivariate characterization of pulp using solid-state 13C NMR, FTIR, and NIR”, Tappi J.74, 201 (1991a).
2.
WallbäcksL.EdlundU.NordénB. and IversenT., “Multivariate characterization of pulp. Part 1. Spectroscopic characterization of physical and chemical differences between pulp using 13C CP/MAS NMR, FTIR, NIR and multivariate data analysis”, Nordic Pulp Paper Res. J.2(6), 74 (1991b). doi: 10.3183/NPPRJ-1991-06-02-p074-080
3.
MichellA.J., “Pulpwood quality estimation by near-infrared spectroscopic measurements on eucalypt woods”, Appita J.48(6), 425 (1995).
4.
MichellA.J. and SchimleckL.R., “Developing a method for the rapid assessment of pulp yield of plantation eucalypt trees beyond the year 2000”, Appita J.51(6), 428 (1998).
5.
SchimleckL.R. and MichellA.J., “Determination of within-tree variation of Kraft pulp yield using near-infrared spectroscopy”, Tappi J.81(5), 229 (1998).
6.
SchimleckL.R.KubeP.D.RaymondC.A.MichellA.J. and FrenchJ., “Estimation of whole-tree Kraft pulp yield of Eucalyptus nitens using near-infrared spectra collected from increment cores”, Can. J. For. Res.35(12), 2797 (2005). doi: 10.11397x05-193
7.
DownesG.M.MederR.HicksC. and EbdonN., “Developing and evaluating a multisite and multispecies NIR calibration for the prediction of Kraft pulp yield in Eucalypts”, Southern Forests71(2), 155 (2009). doi: 10.2989/SF.2009.71.2.11.826
8.
MederR.ThummA. and BierH., “Veneer stiffness predicted by NIR spectroscopy calibrated using mini-LVL test panels”, Holz Roh- Werkst.60(3), 159 (2002).
9.
MederR.ThummA. and MarstonD., “Sawmill trial of at-line prediction of recovered lumber stiffness by NIR spectroscopy of radiata pine cants”, J. Near Infrared Spectrosc.11(2), 137 (2003). doi: 10.1255/jnirs.361
10.
ThummA. and MederR., “Stiffness prediction of radiata pine clearwood test pieces using NIR spectroscopy”, J. Near Infrared Spectrosc.9(2), 117 (2001). doi: 10.1255/jnirs.298
11.
ZboňákA. and BushT., “Application of near-infrared spectroscopy in prediction of microfibril angle of a 14-year-old Pinus patula”, in Wood Structure and Properties '06, Ed by KurjatkoS.KúdelaJ. and LagaňaR.Arbora Publishers, Zvolen, Slovakia, pp. 175–180 (2006).
12.
TsuchikawaS., “A review of recent near infrared research for wood and paper”, Appl. Spectrosc. Rev.42(1), 43 (2007). doi: 10.1080/05704920601036707
13.
WangX.CarterP.RossR.J. and BrashawB.K., “Acoustic assessment of wood quality of raw materials: A path to increased profitability”, For. Prod. J.34, 6 (2007).
14.
EvansR., “Rapid measurement of the transverse dimensions of tracheids in radial wood sections from Pinus radiata”, Holzforsch.48(2), 168 (1994). doi: 10.1515/hfsg.1994.48.2.168
15.
EvansR., “A variance approach to the X-ray diffractometric estimation of microfibril angle in wood”, Appita J.52(4), 283 (1999).
16.
EvansR.StuartS.A. and Van der TouwJ., “Microfibril angle scanning of increment cores by X-ray diffractometry”, Appita J.49(6), 411 (1996).
17.
EvansR.HughesM. and MenzD., “Microfibril angle variation by scanning X-ray diffractometry”, Appita J.52(5), 363 (1999).
18.
SchimleckL.R. and EvansR.“Estimation of microfibril angle of increment cores by near infrared spectroscopy”, IAWA J.23(3), 225 (2002).
19.
JonesP.D.SchimleckL.R.PeterG.F.DanielsR.F. and ClarkA.III, “Nondestructive estimation of wood chemical composition of sections of radial wood strips by diffuse reflectance near infrared spectroscopy, Wood Sci. Technol.40, 709 (2006). doi: 10.1007/s00226-006-0085-6
20.
DownesG.M.MederR.HarwoodC.EvansR.EbdonN.BondH.JoyceK. and SouthertonS., “Radial variation in cellulose content and Kraft pulp yield in Eucalyptus nitens using near infrared spectral analysis of air-dry wood surfaces”, J. Near Infrared Spectrosc., 18(2), 147 (2010). doi: 10.1255/jnirs.875
21.
Tappi, Acid-Insoluble Lignin in Wood and Pulp, Tappi Test Method T222 om-2006 (2006).
22.
Tappi, Preparation of Wood for Chemical Analysis, Tappi Test Method T264 om-2007 (2007).
23.
SavitzkyA. and GolayM.J.E., “Smoothing and differentiation of data by simplified least squares procedures”, Anal. Chem.36, 1627 (1964). doi: 10.1021/ac60214a047
