Transferring calibrations between near infrared instruments is not always straightforward, even when the instruments are nominally the same. Problems can include both wavelength shifts and differences in absorbance response between instruments. This review describes a number of chemometric methods that have been developed to aid calibration transfer. The approaches are classified under three headings: making robust calibrations, adjusting calibrations and adjusting spectra. Calibrations can be made more robust, and more transferable, by the appropriate use of spectral pre-treatments that reduce between-instrument variability. Robust calibrations can also be made by pooling data from several instruments when calibrating. Calibrations can be adjusted using skew and bias corrections estimated from a modest number of samples with known reference values. Under the third heading, adjusting spectra, come methods such as piecewise direct standardisation and the patented method of Shenk and Westerhaus that use spectral information from samples measured on two instruments to match the spectral response of the instruments.
AdhihettyI.S.McGuireJ.A.WangmaneeratB.NiemczykT.M. and HaalandD.M., “Achieving transferable multivariate spectral calibration models: Demonstration with infrared spectra of thin-film dielectrics on silicon”, Anal. Chem.63, 2329–2338 (1991).
2.
AndersonC.E. and KalivasJ.H., “Fundamentals of calibration transfer through Procrustes analysis”, Appl. Spectrosc.53, 1268–1276 (1999).
3.
BärringH.K.BoelensH.F.M.de NoordO.E. and SmildeA.K., “Optimizing meta-parameters in continuous piecewise direct standardization”, Appl. Spectrosc.55, 458–466 (2001).
4.
BistonR. and DardenneP., “Testing a network of eight NIR instruments for analysing of wheat and forage”, in The Proceedings of the 2nd International NIRS Conference, Ed by IwamotoM. and KawanoS.Korin Publishing, Tokyo, Japan, pp. 100–109 (1990).
5.
BlakeneyA.B.BattenG.D. and WelshL.A., “Choosing materials as NIR standards”, in Leaping Ahead with Near Infrared Spectroscopy, Ed by BattenG.D.FlinnP.C.WelshL.A. and BlakeneyA.B.Royal Australian Chemical Institute, Melbourne, Australia, pp. 36–39 (1995).
6.
BlancoM.CoelloJ.IturriagaH.MaspochS. and RoviraE., “Wavelength calibration transfer between diode array UV-visible spectrophotometers”, Appl. Spectrosc.49, 593–597 (1995).
7.
BlankT.B.SumS.T.BrownS.D. and MonfreS.L., “Transfer of near-infrared multivariate calibrations without standards”, Anal. Chem.68, 2987–2995 (1996).
8.
BouveresseE. and CampbellB., “Transfer of multivariate calibration models based on near-infrared spectroscopy”, in Handbook of Near-Infrared Analysis, 2nd Edn, Ed by BurnsD.A. and CiurczakE.W.Dekker, New York, USA, pp. 241–260 (2001).
9.
BouveresseE.CasolinoC. and de la PezuelaC., “Application of standardisation methods to correct the spectral differences induced by a fibre optic probe used for the near-infrared analysis of pharmaceutical tablets”, J. Pharm. Biomed. Anal.18, 35–42 (1998).
10.
BouveresseE.HartmannC.MassartD.L.LastI.R. and PrebbleK.A., “Standardization of near-infrared spectrometric instruments”, Anal. Chem.68, 982–990 (1996).
11.
BouveresseE. and MassartD.L., “Improvement of the piecewise direct standardisation procedure for the transfer of NIR spectra for multivariate calibration”, Chemom. Intell. Lab.32, 201–213 (1996).
12.
BouveresseE. and MassartD.L., “Standardisation of near-infrared spectrometric instruments: A review”, Vibrational Spectroscopy11, 3–15 (1996).
13.
BouveresseE.MassartD.L. and DardenneP., “Calibration transfer across near-infrared spectrometric instruments using Shenk's algorithm: Effects of different standardisation samples”, Anal. Chim. Acta297, 405–416 (1994).
14.
BouveresseE.MassartD.L. and DardenneP., “Modified algorithm for standardization of near-infrared spectrometric instruments”, Anal. Chem.67, 1381–1389 (1995).
15.
BrimmerP.J. and DeThomasF.A., “Stability of NIR instrumentation: Control of critical parameters affecting analytical precision and transferability of NIR calibrations”, in Making Light Work: Advances in Near Infrared Spectroscopy, Ed by MurrayI. and CoweI.A.VCH, Weinheim, Germany, pp. 35–40 (1992).
16.
BüchmannN.B., “Near infrared networking – the ultimate control”, in Near Infrared Spectroscopy: The Future Waves, Ed by DaviesA.M.C. and WilliamsP.NIR Publications, Chichester, UK, pp. 479–483 (1996).
17.
BüchmannN.B., “Development of global near infrared transmission calibrations for moisture and protein in cereals using artificial neural networks and very large data sets”, in Near Infrared Spectroscopy: Proceedings of the 9th International Conference, Ed by DaviesA.M.C. and GiangiacomoR.NIR Publications, Chichester, UK, pp. 231–236 (2000).
18.
BüchmannN.B. and RunforsS., “The standardisation of Infratec 1221 near infrared transmission instruments in the Danish network used for the determination of protein and moisture in grains”, J. Near Infrared Spectrosc.3, 35–42 (1995).
19.
BudaiJ. and FüköJ., “Certified reference material/wheat/series for NIR/NIT equipment”, in Leaping Ahead with Near Infrared Spectroscopy, Ed by BattenG.D.FlinnP.C.WelshL.A. and BlakeneyA.B.Royal Australian Chemical Institute, Melbourne, Australia, pp. 32–35 (1995).
20.
BudaiJ. and FüköJ., “Experience with certified reference material (wheat) series for near infrared reflectance/near infrared transmittance equipment”, in Near Infrared Spectroscopy: The Future Waves, Ed by DaviesA.M.C. and WilliamsP.NIR Publications, Chichester, UK, pp. 116–118 (1996).
21.
CampbellB.H., “When to use chemometric near infrared transfer steps”, in Near Infrared Spectroscopy: The Future Waves, Ed by DaviesA.M.C. and WilliamsP.NIR Publications, Chichester, UK, pp. 218–220 (1996).
22.
ChenC.-S.BrownC.W. and LoS.-C., “Calibration transfer from sample cell to fiber-optic probe”, Appl. Spectrosc.51, 744–748 (1997).
23.
ConzenJ.-P.StadelmannT.SchmidtA.WeilerH.Droz-GeorgetT. and ZillanA., “Calibration transfer—a question of your needs”, in Near Infrared Spectroscopy: Proceedings of the 9th International Conference, Ed by DaviesA.M.C. and GiangiacomoR.NIR Publications, Chichester, UK, pp. 221–224 (2000).
24.
CoweI.A. and DaviesA.M.C., “Permanent samples for standardising near infrared instruments”, in Near Infrared Spectroscopy: The Future Waves, Ed by DaviesA.M.C. and WilliamsP.NIR Publications, Chichester, UK, pp. 119–121 (1996).
25.
CoweI.A.ShenkJ.S. and WesterhausM.O., “The effect of ISI standardisation on the performance of Infratec instruments”, in Near Infrared Spectroscopy: Proceedings of the 9th International Conference, Ed by DaviesA.M.C. and GiangiacomoR.NIR Publications, Chichester, UK, pp. 197–203 (2000).
26.
DardenneP. and BistonR., “Standardization procedure and NIR instrument network”, in Proceedings of the Third International Conference on Near Infrared Spectroscopy, Ed by BistonR. and Bartiaux-ThillN.Agricultural Research Centre Publishing, Gembloux, Belgium, pp. 655–662 (1991).
27.
DardenneP.BistonR. and SinnaeveG., “Calibration transferability across NIR instruments”, in Near Infra-red Spectroscopy: Bridging the Gap between Data Analysis and NIR Applications, Ed by HildrumK.I.IsakssonT.NæsT. and TandbergA.Ellis Horwood, Chichester, UK, pp. 453–458 (1992).
28.
DardenneP. and WelleR., “New approach for calibration transfer from a local database to a global database”, J. Near Infrared Spectrosc.6, 55–60 (1998).
29.
DaviesA.M.C. and MartensH.A., “SPHERE: A device to aid instrument standardisation and calibration transfer”, in Near Infra-red Spectroscopy: Bridging the Gap between Data Analysis and NIR Applications, Ed by HildrumK.I.IsakssonT.NæsT. and TandbergA.Ellis Horwood, Chichester, UK, pp. 141–145 (1992).
30.
de NoordO.E., “The influence of data preprocessing on the robustness and parsimony of multivariate calibration models”, Chemom. Intell. Lab.23, 65–70 (1994).
31.
de NoordO.E., “Multivariate calibration standardization”, Chemom. Intell. Lab.25, 85–97 (1994).
32.
DeanT. and IsakssonT., “Standardisation: What is it and how is it done? Part 1”, NIR news4(2), 8–9 (1993).
33.
DeanT. and IsakssonT., “Standardisation: What is it and how is it done? Part 2”, NIR news4(4), 14–15 (1993).
34.
DeanT.A. and KowalskiB.R., “Multivariate instrument standardization: Review of the state of the art”, in Computer Assisted Analytical Spectroscopy, Ed by BrownS.D.Wiley, Chichester, UK, pp. 175–187 (1996).
35.
DespagneF.MassartD.L. and de NoordO.E., “Optimization of partial-least-squares calibration models by simulation of instrumental perturbations”, Anal. Chem.69, 3391–3399 (1997).
36.
DespagneF.WalczakB. and MassartD.L., “Transfer of calibrations of near-infrared spectra using neural networks”, Appl. Spectrosc.52, 732–745 (1998).
37.
DraskovicsI. and SzabóE., “The use of a network of NIT instruments to control wheat quality in Hungary”, in Making Light Work: Advances in Near Infrared Spectroscopy, Ed by MurrayI. and CoweI.A.VCH, Weinheim, Germany, pp. 233–235 (1992).
38.
DreassiE.CeramelliG.PerruccioP.L. and CortiP., “Transfer of calibration in near-infrared reflectance spectrometry”, Analyst123, 1259–1264 (1998).
39.
DuponchelL.RuckebuschC.HuvenneJ.P. and LegrandP., “Standardisation of near infrared spectrometers using artificial neural networks”, J. Near Infrared Spectrosc.7, 155–166 (1999).
40.
DuponchelL.RuckebuschC.HuvenneJ.P. and LegrandP., “Standardisation of near-IR spectrometers using artificial neural networks”, J. Mol. Struct.480–481, 551–556 (1999).
41.
FearnT., “Calibration transfer without standards”, NIR news8(5), 7–8 (1997).
42.
FearnT.EddisonC.WitheyR. and CoweI.A., “A method for wavelength standardisation in filter instruments”, J. Near Infrared Spectrosc.4, 111–118 (1996).
43.
FlinnP.C. and MurrayI., “NIR analysis of pelleted feeds for Australian live sheep exports: Comparison of spectral scans from two monochromators”, in Analytical Applications of Spectroscopy, Ed by CreaserC.S. and DaviesA.M.C.Royal Society of Chemistry, London, UK, pp. 106–108 (1988).
44.
FlinnP.C. and SaundersL.D., “Making the old a slave to the new: Using existing calibrations on a new NIR instrument”, in Leaping Ahead with Near Infrared Spectroscopy, Ed by BattenG.D.FlinnP.C.WelshL.A. and BlakeneyA.B.Royal Australian Chemical Institute, Melbourne, Australia, pp. 129–132 (1995).
45.
ForinaM.ArmaninoC. and GiangiacomoR., “A case study on the transfer of the calibration equation in NIRS”, in Near Infra-red Spectroscopy: Bridging the Gap between Data Analysis and NIR Applications, Ed by HildrumK.I.IsakssonT.NæsT. and TandbergA.Ellis Horwood, Chichester, UK, pp. 91–96 (1992).
46.
ForinaM.DravaG.ArmaninoC.BoggiaR.LanteriS.LeardiR.CortiP.ContiP.GiangiacomoR.GallienaC.BigoniR.QuartariI.SerraC.FerriD.LeoniO. and LazzeriL., “Transfer of calibration function in near-infrared spectroscopy”, Chemom. Intell. Lab.27, 189–203 (1995).
47.
FreemanG.H.C., “Physical standards for calibrating NIR instruments”, in Making Light Work: Advances in Near Infrared Spectroscopy, Ed by MurrayI. and CoweI.A.VCH, Weinheim, Germany, pp. 115–123 (1992).
48.
FunkD.B., “New methods for wavelength standardisation for near infrared spectrophotometers. Part 1. Review of current standardisation methodology”, J. Near Infrared Spectrosc.4, 101–106 (1996).
49.
FunkD.B., “Instrumentation considerations for robust near infrared applications”, in Near Infrared Spectroscopy: Proceedings of the 9th International Conference, Ed by DaviesA.M.C. and GiangiacomoR.NIR Publications, Chichester, UK, pp. 171–176 (2000).
50.
García-OlmoJ.Garrido-VaroA. and De PedroE., “The transfer of fatty acid calibration equations using four sets of unsealed liquid standardisation samples”, J. Near Infrared Spectrosc.9, 49–62 (2001).
51.
GeladiP.BärringH.DåbakkE.TryggJ.AnttiH.WoldS. and KarlbergB., “Calibration transfer for predicting lake-water pH from near infrared spectra of lake sediments”, J. Near Infrared Spectrosc.7, 251–264 (1999).
52.
GemperlineP.J.ChoJ.H.AldridgeP.K. and SekulicS.S., “Appearance of discontinuities in spectra transformed by the piecewise direct instrument standardization procedure”, Anal. Chem.68, 2913–2915 (1996).
53.
HalakA.HozerL.KamiñskiA.OleksowiczM.SierzputowskiA.UjdaZ.PodkówkaW.PodkówkaZ. and GerwinA., “A new ceramic standard for infrared diffuse reflectance spectroscopy”, in Making Light Work: Advances in Near Infrared Spectroscopy, Ed by MurrayI. and CoweI.A.VCH, Weinheim, Germany, pp. 112–114 (1992).
54.
HardyC.L.RippkeG.R.HurburghC.R.Jr and BrummT.J., “Calibration and field standardization of Foss Grainspec analyzers for corn and soyabeans”, in Near Infrared Spectroscopy: The Future Waves, Ed by DaviesA.M.C. and WilliamsP.NIR Publications, Chichester, UK, pp. 132–141 (1996).
55.
HeckmanR.A.DiffeeJ.T. and MilhousL.A.Jr, “Transfer of near-infrared monochromator calibrations for tobacco constituents to tilting-filter instruments”, Anal. Chim. Acta192, 197–203 (1987).
56.
HoffmannU. and Zanier-SzydlowskiN., “Portability of near infrared spectroscopic calibrations for petrochemical parameters”, J. Near Infrared Spectrosc.7, 33–45 (1999).
57.
IsakssonT. and KowalskiB., “Piece-wise multiplicative scatter correction applied to near-infrared diffuse transmittance data from meat products”, Appl. Spectrosc.47, 702–709 (1993).
58.
JonesJ.A.LastI.R.MacDonaldB.F. and PrebbleK.A., “Development and transferability of near-infrared methods for determination of moisture in a freeze-dried injection product”, J. Pharm. Biomed. Anal.11, 1227–1231 (1993).
59.
KrischenkoV.P.EfremtsevV.G. and GundaevM.A., “Standardisation of infrared analysers and use of global calibrations”, in Making Light Work: Advances in Near Infrared Spectroscopy, Ed by MurrayI. and CoweI.A.VCH, Weinheim, Germany, pp. 229–232 (1992).
60.
LinJ., “Near-IR calibration transfer between different temperatures”, Appl. Spectrosc.52, 1591–1596 (1998).
61.
MarkH. and WorkmanJ.Jr, “A new approach to generating transferable calibrations for quantitative near-infrared spectroscopy”, Spectroscopy3(11), 28–36 (1988).
62.
MartinN.P.MattesonM.UndersanderD. and PetersJ., “Near infrared spectroscopy forage and feed testing network: A model of cooperation”, in Near Infrared Spectroscopy: The Future Waves, Ed by DaviesA.M.C. and WilliamsP.NIR Publications, Chichester, UK, pp. 552–558 (1996).
63.
MoyaL.GarridoA.GuerreroJ.E.LizasoJ. and GómezA., “Quality control of raw materials in the feed compound industry”, in Leaping Ahead with Near Infrared Spectroscopy, Ed by BattenG.D.FlinnP.C.WelshL.A. and BlakeneyA.B.Royal Australian Chemical Institute, Melbourne, Australia, pp. 111–116 (1995).
64.
OsborneB.G. and FearnT., “Collaborative evaluation of universal calibrations for the measurement of protein and moisture in flour by near infrared reflectance”, J. Fd. Technol.18, 453–460 (1983).
65.
OsborneB.G.KotwalZ.WesleyI.J.CrosbieG.B.TarrA.HarasymowS.DardenneP. and ShenkJ.S., “Collaborative development of near infrared calibrations for quality testing of wheat and barley breeding material: 1. Optical matching of instruments”, in Near Infrared Spectroscopy: Proceedings of the 9th International Conference, Ed by DaviesA.M.C. and GiangiacomoR.NIR Publications, Chichester, UK, pp. 177–181 (2000).
66.
OsborneB.G.KotwalZ.WesleyI.J.SaundersL.DardenneP. and ShenkJ.S., “Optical matching of near infrared reflectance monochromator instruments for the analysis of ground and whole wheat”, J. Near Infrared Spectrosc.7, 167–178 (1999).
67.
ParkR.S.AgnewR.E. and BarnesR.J., “The development of near infrared reflectance spectroscopy calibrations for undried grass silage and their transfer to another instrument using multiple and single sample standardisation”, J. Near Infrared Spectrosc.7, 117–131 (1999).
68.
ParkR.S.AgnewR.E.GordonF.J. and BarnesR.J., “The development and transfer of undried grass silage calibrations between near infrared reflectance spectroscopy instruments”, Animal Feed Science and Technology78, 325–340 (1999).
69.
PierceR.O.FunkD.B. and BrennerC.A., “Applying near infrared spectroscopy to the needs of US grain inspection”, in Near Infrared Spectroscopy: The Future Waves, Ed by DaviesA.M.C. and WilliamsP.NIR Publications, Chichester, UK, pp. 451–456 (1996).
70.
PuigdomenechA.GarridoA.de la RozaB.LucenaB.AragayM. and MartinezA., “Harmonization of animal feeds evaluation using NIRS”, in Leaping Ahead with Near Infrared Spectroscopy, Ed by BattenG.D.FlinnP.C.WelshL.A. and BlakeneyA.B.Royal Australian Chemical Institute, Melbourne, Australia, pp. 107–110 (1995).
71.
RippkeG.R.HardyC.L.HurburghC.R.Jr and BrummT.J., “Calibration and field standardization of Tecator Infratec analyzers for corn and soyabeans”, in Near Infrared Spectroscopy: The Future Waves, Ed by DaviesA.M.C. and WilliamsP.NIR Publications, Chichester, UK, pp. 122–131 (1996).
72.
ShenkJ.S., “Standardizing NIRS instruments”, in Proceedings of the Third International Conference on Near Infrared Spectroscopy, Ed by BistonR. and Bartiaux-ThillN.Agricultural Research Centre Publishing, Gembloux, Belgium, pp. 649–654 (1991).
73.
ShenkJ.S., “Networking and calibration transfer”, in Making Light Work: Advances in Near Infrared Spectroscopy, Ed by MurrayI. and CoweI.A.VCH, Weinheim, Germany, pp. 223–228 (1992).
74.
ShenkJ.S. and WesterhausM.O., US Patent No. 4,866,644 (12 September 1989).
75.
ShenkJ.S. and WesterhausM.O., “New standardization and calibration procedures for NIRS analytical systems”, Crop Sci.31, 1694–1696 (1991).
76.
ShenkJ.S. and WesterhausM.O., “Comments on Standardisation: Part 2”, NIR news4(5), 13–15 (1993).
77.
ShenkJ.S. and WesterhausM.O., “Comparison of standardization techniques”, in Near Infrared Spectroscopy: The Future Waves, Ed by DaviesA.M.C. and WilliamsP.NIR Publications, Chichester, UK, pp. 113–115 (1996).
78.
ShenkJ.S.WesterhausM.O. and TempletonW.C.Jr, “Calibration transfer between near infrared reflectance spectrophotometers”, Crop Science25, 159–161 (1985).
79.
ShenkJ.S.WorkmanJ.J.Jr and WesterhausM.O., “Application of NIR spectroscopy to agricultural products”, in Handbook of Near-Infrared Analysis, Ed by BurnsD.A. and CiurczakE.W.Dekker, New York, USA, pp. 383–431 (1992).
80.
SiskaJ.J. and HurburghC.R.Jr, “The standardisation of near infrared instruments using master selection and Wiener filter methods”, J. Near Infrared Spectrosc.9, 107–116 (2001).
81.
SiskaJ.J.HurburghC.R.Jr and SiskaP.P., “The impact of instrument engineering parameters on spectral reproducibility across filter instruments”, J. Near Infrared Spectrosc.9, 97–105 (2001).
82.
SjöblomJ.SvenssonO.JosefsonM.KullbergH. and WoldS., “An evaluation of orthogonal signal correction applied to calibration transfer of near infrared spectra”, Chemom. Intell. Lab.44, 229–244 (1998).
83.
SumS.T. and BrownS.D., “Standardization of fiber-optic probes for near-infrared multivariate calibrations”, Appl. Spectrosc.52, 869–877 (1998).
84.
SwierengaH.de GrootP.J.de WeijerA.P.DerksenM.W.J. and BuydensL.M.C., “Improvement of PLS model transferability by robust wavelength selection”, Chemom. Intell. Lab.41, 237–248 (1998).
85.
SwierengaH.HaanstraW.G.de WeijerA.P. and BuydensL.M.C., “Comparison of two different approaches toward model transferability in NIR spectroscopy”, Appl. Spectrosc.52, 7–16 (1998).
86.
SwierengaH.WülfertF.de NoordO.E.de WeijerA.P.SmildeA.K. and BuydensL.M.C., “Development of robust calibration models in near infra-red spectrometric applications”, Anal. Chim. Acta411, 121–135 (2000).
87.
TillmannP.ReinhardtT.-C. and PaulC., “Networking of near infrared spectroscopy instruments for rapeseed analysis: A comparison of different procedures”, J. Near Infrared Spectrosc.8, 101–107 (2000).
88.
WalczakB.BouveresseE. and MassartD.L., “Standardization of near-infrared spectra in the wavelet domain”, Chemom. Intell. Lab.36, 41–51 (1997).
89.
WangQ.DeJesusS.ConzenJ.P.SchmidtA. and WeilerH., “Calibration transfer in near infrared analysis of liquids and solids”, J. Near Infrared Spectrosc.6, A201–A205 (1998).
90.
WangY. and KowalskiB.R., “Calibration transfer and measurement stability of near-infrared spectrometers”, Appl. Spectrosc.46, 764–771 (1992).
91.
WangY. and KowalskiB.R., “Standardization of second-order instruments”, Anal. Chem.65, 1174–1180 (1993).
92.
WangY. and KowalskiB.R., “Temperature-compensating calibration transfer for near-infrared filter instruments”, Anal. Chem.65, 1301–1303 (1993).
93.
WangY.LysaghtM.J. and KowalskiB.R., “Improvement of multivariate calibration through instrument standardization”, Anal. Chem.64, 562–564 (1992).
94.
WangY.VeltkampD.J. and KowalskiB.R., “Multivariate instrument standardization”, Anal. Chem.63, 2750–2756 (1991).
95.
WangZ.DeanT. and KowalskiB.R., “Additive background correction in multivariate instrument standardization”, Anal. Chem.67, 2379–2385 (1995).
96.
WesterhausM.O., “Improving repeatability of NIR calibrations across instruments”, in Proceedings of the Third International Conference on Near Infrared Spectroscopy, Ed by BistonR. and Bartiaux-ThillN.Agricultural Research Centre Publishing, Gembloux, Belgium pp. 671–674 (1991).
97.
WorkmanJ.Jr and CoatesJ., “Multivariate calibration transfer”, Spectroscopy8(9), 36–42 (1993).
98.
WülfertF.KokW.T.de NoordO.E. and SmildeA.K., “Correction of temperature-induced spectral variation by continuous piecewise direct standardization”, Anal. Chem.72, 1639–1644 (2000).
99.
WüstE. and RudzikL., “Possibilities and problems of a network of infrared spectrometers in the dairy industry”, in Proceedings of the Third International Conference on Near Infrared Spectroscopy, Ed by BistonR. and Bartiaux-ThillN.Agricultural Research Centre Publishing, Gembloux, Belgium, pp. 679–685 (1991).
100.
XieY. and HopkeP.K., “Calibration transfer as a data reconstruction problem”, Anal. Chim. Acta384, 193–205 (1999).
101.
XieY.HopkeP.K. and PaateroP., ‘Erratum to “Calibration transfer as a data reconstruction problem”’, Anal. Chim. Acta392, 347 (1999).
