Spatial distributions of the degree of acetylation in cross- and radial-sectional faces of beechwood samples under vapour-phase reaction are observed using near infrared hyperspectral imaging. The near infrared second derivative amplitude at 1727 nm, which is assigned to the first overtone of the CH stretching vibration averaged over the cross section and radial section, has strong linear correlation with the substance concentration of acetyl groups (CA) held in the cell walls. Tangentially averaged CA is well explained by the modified rate equation. Both the rate constant and hindrance to the diffusion reagent reach constant values at a depth of about 4 mm from the edge of the wood, indicating that the acetylation reaction proceeds close to a depth of 4 mm.
HillC.A.S., Wood Modification: Chemical, Thermal and Other Processes.John Wiley, Hoboken, NJ (2006).
2.
RowellR.M.TillmanA.M. and ZhengtianL., “Dimensional stabilization of flakeboard by chemical modification”, Wood Sci. Technol.20, 83 (1986). doi: http://dx.doi.org/10.1007/BF00350696
3.
RowellR.M.ImamuraY.KawaiS. and NorimotoM., “Dimensional stability, decay resistance and mechanical properties of veneer-faced load-density particleboards made from acetylated wood”, Wood Fiber Sci.21, 67 (1989).
4.
OhkoshiM.KatoA.SuzukiK.HayashiN. and IshiharaM., “Characterization of acetylated wood decayed by brown-rot and white-rot fungi”, J. Wood Sci.45, 69 (1999). doi: http://dx.doi.org/10.1007/BF00579526
HillC.A.S. and JonesD., “The dimensional stabilization of Corsican pine sapwood by reaction with carboxylic acid anhydrides”, Holzforschung50, 457 (1996). doi: http://dx.doi.org/10.1515/hfsg.1996.50.5.457
7.
HonD.N.S. and BangiA.P., “Chemical modification of juvenile wood. Part 1. Juvenility and response of southern pine OSB flakes to acetylation”, Forest Prod. J.46, 73 (1996).
8.
RowellR.M.SimonsonR.HessS.PlackettD.V.CronshawD. and DunninghamE., “Acetyl distribution in acetylated whole wood and reactivity of isolated wood cell-wall components to acetic anhydride”, Wood Fiber Sci.26, 11 (1994).
9.
HansmannC.SchwanningerM.StefkeB.HinterstoisserB. and GindlW., “UV-microscopic analysis of acetylated spruce and birch cell walls”, Holzforschung58, 483 (2004). doi: http://dx.doi.org/10.1515/HF.2004.073
WilliamsP.J.GeladiP.BritzT.J. and ManleyM., “Investigation of fungal development in maize kernels using NIR hyperspectral imaging and multivariate data analysis”, J. Cereal Sci.55, 272 (2012). doi: http://dx.doi.org/10.1016/j.jcs.2011.12.003
12.
ElMasryG.LqbalA.SunD.W.AllenP. and WardP., “Quality classification of cooked, sliced turkey hams using NIR hyperspectral imaging system”, J. Food Eng.103, 333 (2011). doi: http://dx.doi.org/10.1016/j.jfoodeng.2010.10.031
13.
FranceL.F.AmigoJ.M.SkibstedE.MaspochS. and CoelloJ., “Fast assessment of the surface distribution of API and excipients in tablets using NIR hyperspectral imaging”, Int. J. Pharm.411, 27 (2011). doi: http://dx.doi.org/10.1016/j.ijpharm.2011.03.012
14.
GosseliR.RodrigueD. and DuchesneC., “On-line prediction of crystallinity spatial distribution across polymerfilms using NIR spectral imaging and chemometrics methods”, Can. J. Chem. Eng.86, 869 (2008). doi: http://dx.doi.org/10.1002/cjce.20098
15.
KoboriH.GorrettaN.RabatelG.BellonM.V.ChaixG.RogerJ.M. and TsuchikawaS., “Applicability of Vis-NIR hyperspectral imaging for monitoring wood moisture content (MC)”, Holzforschung67, 307 (2013). doi: http://dx.doi.org/10.1515/hf-2012-0054
16.
MederR. and MeglenR.R., “Near infrared spectroscopic and hyperspectral imaging of compression wood in Pinus radiata D. Don”, J. Near Infrared Spectrosc.20, 583 (2012). doi: http://dx.doi.org/10.1255/jnirs.1001
17.
AgrestG.BonifaziG.CaliennoL.CapobiancoG.MonacoA.L.PelosiC.PicchioR. and SerrantiS., “Surface investigation of photo-degraded wood by colour monitoring, infrared spectroscopy and hyperspectral imaging”, J. Spectrosc.2013, 380536 (2013). doi: http://dx.doi.org/10.1155/2013/380536
18.
FernandesA.LousadaJ.MoraisJ.XavierJ.PereiraJ. and Melo-PintoP., “Measurement of intra-ring wood density by means of imaging VIS/NIR spectroscopy (hyperspectral imaging)”, Holzforschung67, 59 (2013). doi: http://dx.doi.org/10.1515/hf-2011-0258
19.
ThummA.RiddellM.NanayakkaraB.HarringtonJ. and MederR., “Near infrared hyperspectral imaging applied to mapping chemical composition in wood samples”, J. Near Infrared Spectrosc.18, 507 (2010). doi: http://dx.doi.org/10.1255/jnirs.909
20.
SchwanningerM.RodriguesJ.C. and FacklerK., “A review of band assignments in near infrared spectra of wood and wood components”, J. Near Infrared Spectrosc.19, 287 (2011). doi: http://dx.doi.org/10.1255/jnirs.955
StefkeB.WindeisenR.SchwanningerM. and HinterstoisserB., “Determination of the weight percentage gain and of the acetyl group content of acetylated wood by means of different infrared spectroscopic methods”, Anal. Chem.80, 1272 (2008). doi: http://dx.doi.org/10.1021/ac7020823
23.
CelenI.HarperD. and LabbeN., “A multivariate approach to the acetylated poplar wood samples by near infrared spectroscopy”, Holzforschung62, 189 (2008). doi: http://dx.doi.org/10.1515/HF.2008.048
