This paper traces research and development in the field of lubrication technology for various mechanical elements. Japan is now in the process of developing the Japanese experimental module (JEM), one component of the US Space Station. This paper therefore emphasizes results relating to mechanical elements that will appear in JEM mechanisms. Methods of lubricating ball-bearings, sliding bearings, ball screws and gears for space use are described and some test results are given.
NosakaM.OikeM.KamijoK.KikuchiM.Experimental study on lubricating performance of self-lubricating ball bearings for liquid hydrogen turbopumps. Lubric. Engng, 1988, 44(1), 3044.
2.
SuzukiM.NosakaM.KamijoK.KikuchiM.Research and development of rotating shaft seals for a liquid hydrogen turbopump. Lubric. Engng, 1986, 42(3), 162–169.
3.
NishimuraM.Tribological problems in space development in Japan. Jap. Soc. Mech. Engrs J., 1988, Ser. Ill, 31(4), 661–670.
4.
NishimuraM.Application of space tribology in Japan. Tribology Int., 1990, 23(2), 143–147.
5.
HashimotoH.HondaT.OhhashiT.WachiS.KaiK.Development of a paddle drive mechanism. Proceedings of the Fifteenth International Symposium on Space technology and science, 1986, pp. 769–774.
6.
KawashimaN.MarumoH.HondaT.Tribological aspects of space mechanisms (in Japanese). Toshiba Rev., 1989, 44(11), 856–858.
7.
HondaT.SugiuraH.OhhashiT.Drive mechanisms for space applications (in Japanese). Toshiba Rev., 1987, 42(8), 593–594.
8.
NishimuraM.SekiK.MiyakawaY.Lubrication characteristics of rolling bearings lubricated by self-lubricating composite retainers. Part 1—selection of bearings for earth sensors (in Japanese). Technical report of National Aerospace Laboratory TR1019, 1989.
9.
IkeuchiM.WakabayashiY.MurakamiC.OhkamiY.KidaT.Evaluation of bearing system using solid lubricant for scanning earth sensor on engineering test satellite IV (in Japanese). J. JSLE, 1983, 28(9), 649–654.
10.
MiyakawaY.NishimuraM.HashimotoH.NishiokaT.ShikanaiT.MarumoH.KawashimaN.HondaT.OhhashiT.Development of ball bearings for a paddle drive mechanism. Proceedings of Fifteenth International Symposium on Space technology and science, 1986, pp. 775–779.
11.
KawamuraTHondaT.KawashimaNNishimuraM.SekiK.Study of ball bearings for space use. Proceedings of Fourth European Symposium on Space mechanisms and tribology, Cannes, France, 20–22 September 1989, pp. 101–107.
12.
HondaT.Tribology in space station (in Japanese). J. Jap. Soc. Mech. Engrs, 1991, 94(867), 140–143.
13.
YoshiiYKawashimaN.HondaT.KawamuraT.NishimuraM.SekiK.The behaviour of lubricants in solid lubricated ball bearings. Proceedings of the Japan International Tribology Conference, 1990, pp. 1839–1844.
14.
HiraokaN.KawashimaN.HondaT.Wear characteristics of bonded solid film lubricant under high load condition. Proceedings of Twenty-fifth Aerospace Mechanisms Symposium, 1991, pp. 179–193.
15.
ChibaM.GyougiT.NishimuraM.SekiK.Development of solid-lubricated ball-screws for use in space. Proceedings of Twenty-fifth Aerospace Mechanisms Symposium, 1991, pp. 195–204.
16.
YoshiiY.KawashimaN.KenmochiN.NodomiY.HondaT.Study of solid-lubricated ball-screws in vacuum (in Japanese). Proceedings of Thirty-fifth Conference on Space science and technology, 1991, pp. 649–650.
17.
MiyakawaY.MizunoS.Study on rolling-sliding friction and wear properties of solid lubricants (Part 1) (in Japanese). Tribologists, 1990, 35(12), 899–906.
18.
NodomiY.HondaT.SasakiA.KawashimaN.SekiK.NishimuraM.Development of gears for space use. Proceedings of Fifth European Symposium on Space mechanisms and tribology, ESTEC, Noordwijk, The Netherlands, 28–30 October 1992, pp. 243–248.
