A series of tests was conducted on a British trunk road in which the dynamic tyre forces generated by approximately 1500 heavy goods vehicles (HGVs) were measured using a load measuring mat containing 144 capacitive strip sensors. The data were used to investigate the relative road-damaging potential of the various classes of vehicles. Air suspensions were found to be more effective at static load equalization than steel suspensions. Two criteria were used to rank axle groups in terms of road damage: the average dynamic load coefficient and the 95th percentile aggregate fourth-power force. These criteria were found to rank axle groups in different orders, due to spatial correlation between tyre forces. On average, air suspended vehicles were found to generate smaller dynamic loads and hence less road damage than steel suspended vehicles. However, some air suspensions with inadequate suspension damping were found to generate very high dynamic loads and consequently very high levels of road damage.
CebonD.Interaction between heavy vehicles and roads. SAE SP-951, 930001, 1993.
2.
MitchellC. G. B.GyenesL.Dynamic pavement loads measured for a variety of truck suspensions. 2nd International Conference on Heavy vehicle weights and dimensions, Kelowna, British Columbia, 1989.
3.
LeonardD. R.GraingerJ. W.EyreR.Loads and vibrations caused by eight commercial vehicles with gross weights exceeding 32 tons. Laboratory report, TRRL, report number LR582, 1974.
4.
WoodrooffeJ. H. F.LeBlancP. A.LePianeK. R.Effects of suspension variations on the dynamic wheel loads of a heavy articulated highway vehicle. Vehicle weights and dimensions study, report volume 11, 1986 (Canroad Transportation Research Corporation, Canada).
5.
HahnW. D.Effects of commercial vehicle design on road stress—quantifying the dynamic wheel loads for stage 3: single axles, stage 4: twin axles, stage 5: triple axles, as a function of the springing and shock absorption system of the vehicle. Institut für Kruftfahrwesen, Universität Hannover (translated by TRRL as WP/V&ED/ 87/40), report number 453, 1987.
6.
SweatmanP. F.A study of dynamic wheel forces in axle group suspensions of heavy vehicles. Special report, Australian Road Research Board, report number SR27, 1983 (Australian Road Research Board).
7.
MonismithC. L.SousaJ.LysmerJ.Modern pavement design technology including dynamic load conditions. SAE Conference on Vehicle/pavement interaction, SP765, Indianapolis, 1988, SAE Trans. 881845 (Society of Automotive Engineers).
8.
O'ConnellS.AbboE.HedrickK.Analyses of moving dynamic loads on highway pavements, Part I: vehicle response. Proceedings of International Symposium on Heavy vehicle weights and dimensions, Kelowna, British Columbia, 1986.
9.
CebonD.An investigation of the dynamic interaction between wheeled vehicles and road surfaces. PhD thesis, University of Cambridge, 1985.
10.
ErvinR. D., et al. Influence of truck size and weight variables on the stability and control properties of heavy trucks. University of Michigan Transportation Research Institute, report number UMTRI–83–10/2, 1983.
11.
HahnW. D.Effects of commercial vehicle design on road stress—vehicle research results. Institut für Kruftfahrwesen, Universität Hannover (translated by TRRL as WP/V&ED/87/38), 1985.
12.
CebonD.Assessment of the dynamic wheel forces generated by heavy road vehicles. ARRB/FORS Symposium on Heavy vehicle suspension characteristics, Canberra, 1987 (Australian Road Research Board).
13.
Council Directive 92/7/EEC. The Council of the European Communities, 10 February 1992.
14.
ColeD. J.CebonD.Assessing the road-damaging potential of heavy vehicles. Proc. Instn Mech. Engrs, Part D, 1991, 205(D4), 223–232.
15.
ColeD. J.CebonD.A capacitive strip sensor for measuring dynamic tyre forces. Proceedings of 2nd International Conference on Road traffic monitoring, London, 1989 (Institution of Electrical Engineers).
16.
CebonD.WinklerC. B.Multiple-sensor weigh-in-motion: theory and experiments. Transportation Research Record, TRB, 1991, 1311, 70–78.
17.
CebonD.WinklerC. B.A study of road damage due to dynamic wheel loads using a load measuring mat. Strategic Highway Research Program, National Research Council, report number SHRP-ID/UFR–91–518, 1991.
18.
CollopA. C. et al. Investigation of spatial repeatability using a tire force measuring mat. 72nd Annual Meeting of the Transportation Research Board, Washington DC, 1993 (Transportation Research Board).
19.
PotterT. E. C.CebonD.ColeD. J.CollopA. C.An investigation of road damage due to measured dynamic tyre forces. Proc. Instn Mech. Engrs, Part D, 1995, 209(D1), 9–24.
20.
ColeD. J.Measurement and analysis of dynamic tyre forces generated by lorries. PhD dissertation, Cambridge University Engineering Department, 1990.
21.
PotterT. E. C., et al. A34 mat tests: results and analysis. Technical Report, Cambridge University Engineering Department, report number CUED/C-MECH/TR61, May 1994.
22.
KinderD. F.LayM. G.Review of the Fourth Power Law. Internal Report, ARRB, report number AIR000–248, June 1988 (Australian Road Research Board).
23.
ColeD. J.CollopA. C.PotterT. E. C.CebonD.Spatial repeatability of measured dynamic tyre forces. Proc. Instn Mech. Engrs, Part D, 1996, 210(D3), 185–197.
24.
BendatJ. S.PiersolA. G.Engineering applications of correlation and spectral analysis, 1980 (John Wiley and Sons).
25.
NewlandD. E.Random vibrations and spectral analysis, 2nd edition, 1985 (Longman).
26.
ColeD. J.CebonD.Validation of an articulated vehicle simulation. Vehicle System Dynamics, 1992, 21, 197–223.
27.
KamashK. M. A.RobsonJ. D.The application of isotropy in road surface modelling. J. Sound and Vibration, 1978, 57(1), 89–100.
28.
ColeD. J.CebonD.Spatial repeatability of dynamic tyre forces generated by heavy vehicles. Proc. Instn Mech. Engrs, Part D, 1992, 206(D1), 17–27.
