A new method of investigating piston ring friction in a firing engine is described. Preliminary results are presented for a spark ignition four-stroke 15 cm3 single cylinder engine. Tests were carried out on both a ringed and ringless version of the same engine. From the difference in b.m.e.p. between the engines, the ring friction could be deduced under firing conditions. This friction increased linearly with speed.
BetzG.GableH.AssmusH. O.Friction power and noise behaviour of the piston assembly. Proceedings of the Second IMechE International Conference on Combustion engines—reduction of friction and wear, 19–20 September 1989, London, paper C375/019, pp. 35–58 (Mechanical Engineering Publications, London).
2.
KuY.G.PattersonD. J.Piston and ring friction by the fixed sleeve method. SAE paper 880571, 1988.
3.
AlfusoS.De PretisC.GiglioV.PoliceG.Analysis of a method for measurement of friction force between piston assembly and cylinder liner. Eleventh Annual Fall Technical Conference of the ASME Internal Combustion Division, 1989, Dearborn, ICE, Vol. 9, pp. 111–120.
4.
Mehmut UrasH.PattersonD. J.Oil and ring effects on piston-ring assembly friction by the instantaneous IMEP method. SAE International Congress and Exposition, 25 February–1 March 1985, Detroit, Michigan, (Society of Automotive Engineers).
5.
PaulG. R.BillintonM.Tests on very small four-stroke spark ignition engines. Proceedings of the IMechE International Conference on The small internal combustion engine, 4–5 April 1989, London, paper C372/017, pp. 105–109 (Mechanical Engineering Publications, London).
