A universal form of profile equation for a plate cam whose follower has an oscillating motion and a convex arbitrary shape is derived in this study. The applied concept is the theory of envelopes in a parametric form. The derived results can be used to determine the profile of the cam with any kind of convex shape of the followers. It is also shown that the traditional followers, such as flat-faced and roller followers, are special cases of the universal form.
HansonD. R. S.ChurchillF. T.Theory of envelope provides new cam design equations. Product Engng, 20 August 1962, 45–55.
2.
ChakrabortyJ.DhandeS. G.Kinematics and geometry of planar and spatial cam mechanisms, 1977 (Wiley Eastern Limited, New Delhi).
3.
RadcliffeC. W.Matrix methods in plate cam geometry. ASME paper 80-DET-111, 1980.
4.
ChanC.PisanoA. P.On the synthesis of cams with irregular followers. Trans. ASME, J. Mech. Des., March 1990, 112, 36–41.
5.
StokerJ. J.Differential geometry, 1969 (John Wiley, New York).
6.
GoetzA.Introduction to differential geometry, 1970 (Addison-Wesley, Reading, Mass.).
7.
FauxI. D.PrattM. J.Computational geometry for design and manufacture, 1979 (Ellis Horwood, Chichester).
8.
MartinG. H.Kinematics and dynamics of machines, 2nd edition, 1982 (McGraw-Hill, New York).
9.
Gonzalez-PalaciosM. A.AngelesJ.Cam synthesis, 1993 (Kluwer Academic Publishers, Dordrecht, The Netherlands).
10.
ChenF. Y.Mechanics and design of cam mechanisms, 1982 (Pergamon Press, Oxford).
11.
ReeveJ.Cams for industry, 1995 (Mechanical Engineering Publications, London).
12.
RothbartH. A.Cams, 1956 (John Wiley, New York).
13.
TsayD. M.HueyC. O.JrApplication of rational B-splines to the synthesis of cam-follower motion programs. Trans. ASME, J. Mech. Des., September 1993, 115, 621–626.
