Sage Journals: Discover world-class research

Abstract

Computational and experimental results are reported of an investigation into jet mixing, using the hydraulic analogue technique to simulate the diesel injection process. Steady state and impulsive injections into both quiescent and swirling flow fields are considered. A comparison between predictions and experimental results shows a deficiency in the turbulence model's capability to predict recirculation zones downstream of the point of injection. The relative effect of swirl on jet penetration is examined and it is argued that a non-uniform injection characteristic leads to a more rapid formation of a combustible mixture, thereby reducing the ignition delay period and the pressure gradient during combustion.

Keywords

diesel engines jet mixing swirling flow finite volume

Get full access to this article

View all access options for this article.

References

Watkins

A. P.

Khalegi

Three-dimensional diesel engine spray modelling. IMechE International Symposium on Computers in engine technology, Cambridge, 1987 (Mechanical Engineering Publications, London).

Brandstätter

Fischer

Melcher

Multi-dimensional engine combustion modelling—a challenge for supercomputers. Second International Symposium on The use of supercomputers in the European automotive industry, Turin, 1988.

Gosman

Flow processes in cylinders. In Thermodynamics and gas dynamics of internal combustion engines, Vol. 2, 1986 (Mechanical Engineering Publications, London).

Whitehouse

N. D.

Abrughes

S. M.

Calculation of fuel air mixing in a diesel engine with swirl for the purpose of heat release prediction. IMechE Conference on Combustion in engines, 1975 (Mechanical Engineering Publications, London).

Iduom

Packer

J. P.

Wallace

F. J.

Charlton

S. J.

An experimental and analytical study of jet impingement and wall jets in high swirl DI using the hydraulic analogy. SAE paper 850263 1985.

Werlberger

Cartellieri

W. P.

Fuel injection and combustion phenomena in a high speed DI diesel engine observed by means of endoscopic high speed photography. SAE paper 870097 1987.

Gan

X. P.

Experimental and analytical studies of jets in quiescent or rotating flow fields. PhD Thesis, University of Bath, 1990.

UMIST Third Biennial Colloquium on CFD, Manchester, 1988.

Newman

J. A.

Brzustowski

T. A.

Behaviour of a liquid jet near the thermodynamic critical region. Am. Inst. Aeronaut. Astronaut. J., 1971, 9, 1596.

10.

Petersen

Jet mixing in DI diesel engine combustion chamber model under quiescent and swirling conditions. PhD Thesis, University of Bath, 1991.

11.

Way

R. J. B.

Investigation of interaction between swirl and jets in direct injection diesel engines using a water model. SAE paper 770412 1977.

12.

HanjalicA

Advanced turbulence closure models: a view of current status and future prospects. Int. Heat and Fluid Flow, 1994, 15(3), 178–203.

13.

Rodi

Turbulence models and their application in hydraulics—a state of the art review. Institut für Hydromechanik, University of Karlesruhe 1984.

14.

Markatos

N. C.

Introduction to computational fluid dynamics and applications to the motor industry. In Computer simulation for fluid flow, heat and mass transfer, and combustion in reciprocating engines, 1989 (Hemisphere, New York).

15.

Tsui

A study of upstream-weighted high order differencing for approximation to flow convection. Int. J. Numer. Meth. in Fluids, 1991, 13, 167–199.

16.

Kuo

T. W.

Bracco

F. V.

On the scaling of impulsively started incompressible turbulent round jets. J. Fluids Engng, 1982, 104, 191.

17.

Hoholis

E. G.

Numerical simulation and experimental investigation of jet injection into a quiescent combustion chamber model. PhD Thesis, UMIST, 1985.

18.

Klein

Rulfs

Einflu der Kraftstoff—Voreinspritzung auf das Betriebsverhalten von mittelschnellaufenden Dieselmotoren. Motortechnische Z., 1992, 53.

Jet Mixing in a Model Direct Injection Diesel Engine with Swirl

Abstract

Keywords

Get full access to this article

References