Sage Journals: Discover world-class research

Abstract

Measurements in a mixed flow pump of non-dimensional specific speed k = 1.89 [N_S = 100 r/min (metric)] are analysed to give loss distribution and local hydraulic efficiencies at different flowrates and values of tip clearance. Fairly close agreement is obtained between the relative flow angles leaving the blading as predicted by simple deviation and slip models and derived from the measurements. The head developed is broken up into two parts: that contributed by Coriolis action and that associated with blade circulation. It is suggested that lift coefficients based on blade circulation are of limited value in selecting blade profiles. The variation of pump efficiency with tip clearance is greater than that reported for centrifugal pumps.

Keywords

tip clearance loss coefficients efficiency scale effects

Get full access to this article

View all access options for this article.

References

Srinivasa

G. R.

Soundranayagam

Aerodynamic measurements in a mixed flow impeller. IAHR Symposium, Belgrade, 1990.

Ray

A. S.

Aerodynamic investigation in a mixed flow pump. PhD thesis, Department of Mechanical Engineering, Indian Institute of Science, Bangalore, India, 1990.

Hutton

S. P.

Component losses in Kaplan turbines and the prediction of efficiency from model tests. Proc. Instn Mech. Engrs, 1954, 168, 743–762.

Soundranayagam

Ramarajan

Scale effects in a mixed flow pump. Part 2. Proc. Instn Mech. Engrs, Part A, 1986, 200(A3), 180–186.

Miles

D. J.

A design method for mixed flow fans and pumps. Report 117, National Engineering Laboratory, UK, 1965.

Carey

Fraser

S. M.

Shamsolahi

Mc-Ewen

Flow analysis and part load performance of model mixed flow pump. International IMechE Conference on Part load pumping operation, control and behaviour, 1988, paper C339/88, pp. 83–88 (Mechanical Engineering Publications, London).

Wislicenus

G. F.

Fluid mechanics of turbomachinery, 2nd edition, 1965 (Dover Publications, New York).

Ishada

Seeno

On pressure losses due to tip clearance of centrifugal blowers. Trans. ASME, J. Engng for Power, 1981, 103, 271–278.

Pampareen

R. C.

Small turbomachinery compressor and fan aerodynamics. Trans. ASME, 1973, 95, 251–256.

10.

Pfleiderer

Die Krieiselpumpen, 5th edition, 1961 (Springer-Verlag, Berlin).

11.

Wood

G. M.

Welna

Lampers

R. P.

Tip clearance effects in centrifugal pumps. Trans. ASME, 1965, 85, 932–940.

Performance of a Mixed Flow Pump with Varying Tip Clearance: Part 2

Abstract

Keywords

Get full access to this article

References