Sage Journals: Discover world-class research

Abstract

Automating the manufacturing process associated with composite components from prepreg presents new engineering challenges. To design, implement and operate machinery to handle and lay-up prepreg sheet material requires a clear understanding of the processes involved. Manipulation of sheet material is an integral part of the lay-up procedure. This paper presents the main automation issues concerning the production processes and defines a mathematical model for predicting the shape of prepreg sheets for the purposes of manipulation. This provides an aid towards the control of shape during the process of lay-up. Critical mould parameters, which determine prepreg sheet shape, are presented. Lay-up trajectories for a multi-arm robotic system have been derived, utilizing the models formulated. Practical trials with an existing multi-arm robotic system have proved satisfactory control of the process.

Keywords

prepreg sheet material lay-up procedure automatic handling multi-arm robotic system

References

Brady

Rise of the robot. The Royal Society, British Association for the Advancement of Science, Science and Public Affairs Magazine, Autumn 1991, pp. 11–15.

Khodabandehloo

Bailey

James

Intelligent vision guided robots. Proceedings of the International Symposium and Exposition on Robots, 1988, pp. 948–959.

Stone

Automation in composites processing. Proceedings of the Twenty-ninth National SAMPE Symposium, 1984, pp. 1489–1498.

Postier

Factory automation for composite structures manufacturing. Thirtieth National SAMPE Symposium, 19–21 March 1985, pp. 586–594.

Goode

Automated ply lamination. First International Conference on Automated composites, 10–12 September 1986, pp. 13/1–13/6 (The Plastics and Rubber Institute).

Evans

The processing of pre-impregnated composite materials. Second International Conference on Automated composites, 26–28 September 1988, pp. 8/1–8/6 (The Plastics and Rubber Institute).

Goldsworthy

Tow, tape and broadgoods in automated layup. Second International Conference on Automated composites, 26–28 September 1988, pp. 14/1–14/14 (The Plastics and Rubber Institute).

Sarhadi

Robotic handling and lay-up of advanced composite materials—an overview. In Sensory robotics for the handling of limp materials, NATO ASI Series, 1990, Vol. F64, pp. 33–49 (Springer-Verlag, Berlin).

Chen

Sarhadi

A robotic lay-up assembly system for manufacturing high performance components. Proceedings of the ICARCV ‘92 Conference, 16–18 September 1992, pp. 1A-10.3.1-IA-10.3.5.

10.

Johnson

D. G.

Hill

J. T.

Flexible manufacturing of composite aerospace structures. Proceedings of the Second International IMechE Conference on Fibre reinforced composites, Liverpool, 8–10 April 1986, paper C26/86, pp. 113–115 (Mechanical Engineering Publications, London).

11.

Whyschogrod

Bernardon

Vision guided manipulation of non-rigid parts: A case study. Proc. SPIE, Automated Inspection and High Speed Vision Architectures, 1987, 849, 225–231.

12.

Jones

Marshall

Sarhadi

Sensor-controlled automation of 2-D garment sub-assembly. Proceedings of the IFAC on Low cost automation, Series N15, 1989, pp. 301–306.

13.

Taylor

Progress towards automated garment manufacture. In Sensory robotics for the handling of limp materials, NATO ASI Series, 1990, Vol. F64, pp. 97–109 (Springer-Verlag, Berlin).

14.

Jones

Zhang

Sarhadi

Performance aspects of a robotic garment assembly cell. Proceedings of the Second International Clothing Conference on Objective measurement technology in the textile and clothing interface, 7–9 July 1992.

15.

Frisch-Fay

Flexible bars, 1962, pp. 33–35 (Butterworths, Oxford).

16.

Peirce

The handle‘ of cloth as a measurable quantity. J. Textile Inst., 1930, 21, T377–T416.

17.

West

Parallel processing for industrial image analysis. MSc thesis, University of Bristol, 1993.

Modelling Flexible Sheets for Automatic Handling and Lay-up of Composite Components

Abstract

Keywords

References