The residual stresses, introduced into high-tensile steel chains during their manufacture as the result of the application of a manufacturing test load, have been determined by the neutron diffraction technique. The results are consistent with finite element calculations and with the effects of the manufacturing test load on the fatigue properties of the chains.
AbolfathiE.WebsterP. J.SwalloweG. M.ModlenG. F.AscoughJ.LowK. S.Residual stresses in chains: Comparison of neutron diffraction and finite element results. Mater. Sci. Technol., 1990, 6, 575–577.
3.
AbolfathiE.WebsterP. J.ModlenG. F.AscoughJ.WangX.Residual stresses in mining chain. International Conference on Residual stresses, Vol. III, Tokushima, 1991, pp. 1045–1050 (Elsevier Applied Science, London).
4.
StrigensP.Einfluss der Oberflachenverfestigung durch Werkstoffverfestigung und Druckeigenspannungen nach einer Oberflachenbehandlung. Z. Werkstofftechnik, 1978, 9, 45–56.
5.
FoleyJ. H.SMRE technical paper P1, Safety in Mines Research Establishment, 1973.
6.
AbolfathiE.ModlenG. F.StarkR. A.Effect of pre-loading on the fatigue behaviour of hoist chains. Fourth Conference of the Irish Durability and Fracture Committee, Belfast, 1986, pp. 247–256 (The Queen's University of Belfast).
7.
TiptonS. M.SharpG. J.The effect of proof loading on the fatigue behaviour of open link chain. J. Engng Mater. Technol., 1992, 114, 27–33.
8.
AbolfathiE.ModlenG. F.WebsterP. J.MillsG.The effect of residual stresses on the properties of hoist chains. Third European Conference on Residual stresses, Frankfurt a.M., 1992, pp. 457–468 (DGM Informationsgesellschaft Verlag, Oberursel).
9.
AllenA. J.HutchingsM. T.WindsorC. C.Neutron diffraction methods for the study of residual stress fields. Adv. Phys., 1985, 34, 445–473.
10.
SpoonerS.WangX. L.HubbardC. R.DavidS. A.Residual stresses in a multi-pass weld in an austenitic steel plate before and after thermal stress relief. Fourth International Conference on Residual stresses, Baltimore, 1994, pp. 964–969 (Society for Experimental Mechanics, Bethel, Pa.).
11.
BourkeM. A. M.WebsterG. A.WebsterP. J.WangX.Neutron diffraction determination of residual stress redistribution in autofrettaged tubing due to fatigue crack growth. International Conference on Residual stresses, Vol. III, Tokushima, 1991, pp. 1031–1038 (Elsevier Applied Science, London).
12.
NoyanI. C.CohenJ. B.Residual stress measurement by diffraction and interpretation, 1987 (Springer-Verlag, New York).
13.
Hibbitt, Karlsson and Sorensen, Inc.ABAQUS manuals, version 4.7, New York, 1988.
14.
AbolfathiE.Effect of link geometry on the properties of chains. PhD thesis, Loughborough University of Technology, 1989.
15.
MetzH.Lifting chains. Wire, 1979, 8, 214–222.
16.
ModlenG. F.StarkR. A.Static and fatigue strength of chains. Second Conference of the Irish Durability and Fracture Committee, Limerick, 1984, pp. 7–19 (Materials Research Publications, Limerick).
