A computational method is developed for determining temperature distributions in machining with coolant. Realistic models are proposed for heat-generation rates in the cutting regions and for heat-transfer coefficients for cooled boundaries. In Part 1 the models used in the analysis are presented while in Part 2 the computational method and results are given.
References
1.
ShawM. C.PigottJ. D.RichardsonL. P.The effect of the cutting fluid upon chip-tool interface temperature. Trans. ASME, 1951, 73, 45–56.
SmartE. F.TrentE. M.Coolants and cutting tool temperatures. Proceedings of Fifteenth International Machine Tool Design Research Conference, 1974, pp. 187–195 (Macmillan, London).
4.
WrightP. K.TrentE. M.Metallographic methods of determining temperature gradients in cutting tools. J. Iron and Steel Inst., 1973, 211, 364–368.
5.
MillsB.WakemanA.AboukhashabaA.A new technique for determining the temperature distribution in high speed steel cutting tools using scanning electron microscopy. Ann. CIRP, 1980, 29, 73–77.
6.
MurakaP. D.BarrowG.HindujaS.Influence of the process variables on the temperature distribution in orthogonal machining using the finite element method. Int. J. Mech. Sci., 1979, 21, 445–456.
7.
TayA. O.StevensonM. G.de Vahl DavisG.Using the finite element method to determine temperature distributions in orthogonal machining. Proc. Instn Mech. Engrs, 1974, 188, 627–638.
8.
TayA. O.StevensonM. G.de Vahl DavisG.OxleyP. L. B.A numerical method for calculating temperature distributions in machining from force and shear angle measurements. Int. J. Mach. Tool Des. Res., 1976, 16, 335–349.
9.
ChildsT. H. C.MaekawaK.MaulikP.Effects of coolant on temperature distribution in metal machining. Mater. Sci. Technol., 1988, 4, 1006–1019.
10.
OxleyP. L. B.Mechanics of machining—an analytical approach to assessing machinability, 1989 (Ellis Horwood, Chichester).
11.
ZorevN.N. Interrelationship between shear processes occurring along tool face and on shear plane in metal cutting. In International research in production engineering, 1963, pp. 42–49 (American Society of Mechanical Engineers, New York).
12.
LiX.A computer-based numerical study of the role of cooling in machining. PhD thesis, University of New South Wales, 1991.
13.
StevensonM. G.WrightP. K.ChowJ. G.Further developments in applying the finite element method to the calculation of temperature distributions in machining and comparisons with experiment. J. Engng for Industry, 1983, 105, 149–154.
14.
ChildsT. H. C.MahdiM. I.On the stress distribution between the chip and tool during metal turning. Ann. CIRP, 1989, 38, 55–58.
15.
HarrisA. G.An investigation to derive a method of predicting the contribution of tool flank wear to tool forces in orthogonal machining. UNSW report 1981/IE, 1981.
16.
SmirnovV. A.VerevochkinP. M.BrdlickP. M.Heat transfer between a jet and a held plate normal to flow. Int. J. Heat Transfer, 1961, 2, 1–7.
17.
MetzgerD. E.CummingsK. N.RubyW. A.Effects of Prandtl number on heat transfer characteristics of impinging liquid jets. Proceedings of the Fifth International Heat Transfer Conference, Vol. 2, 1974, pp. 20–24.
18.
StevensJ.WebbW. B.Local heat transfer coefficients under an axi-symmetric, single-phase liquid jet. 1989 National Heat Transfer Conference on Heat transfer in electronics, 1989, paper HTD-111, pp. 113–119.
19.
GoldsteinR. J.FranchettM. E.Heat transfer from a flat surface to an oblique impinging jet. Trans. ASME, J. Heat Transfer, 1988, 110, 84–90.
20.
RohsenowW.HartnettJ. P.Handbook of heat transfer, 1973 (McGraw-Hill, New York).
